Nakamura-Tome AS-200L

What the maker publishes about the current Nakamura-Tome AS-200L

Nakamura-Tome builds the AS-200L as a single-turret multitasking lathe with a Y-axis and milling fitted as standard. The Y-axis strokes 82mm. Milling runs on a 5.5/3.7kw drive. Milling tools turn at 6000 min-1. The left spindle takes an 8″ chuck. Bar capacity on that spindle is 65mm, or 71mm in a second version. Its drive motor is rated 15/11kW. Left spindle speed reaches 4,500 min-1. An optional right spindle takes a 6″ chuck and 42mm bar. That right spindle runs to 6,000 min-1 on 7.5/5.5kW. Turning diameter is 290mm with the 12-station turret and 280mm with the optional 15-station one. Turning length is 570mm. With the option, centers can sit 760mm apart. Rapids are 24m/min for X and 36m/min for Z. The C-axis indexes at 600 min-1. The dodecagonal drum turret has room for 24 stations at most. The control fitted is the FANUC 0i-TF Plus, with a 15 inch touch screen. It stores up to 1000 programs in 2MB. NT Manual Guide i programming support comes standard.

Source: Nakamura-Tome, September 27, 2026.

What the Nakamura-Tome AS-200L is used for

Nakamura-Tome calls the AS-200L a first step into multitasking: a single-turret lathe with an 82 mm Y axis and a milling spindle as standard, so a part from bar up to 65 or 71 mm can be turned and milled on the one machine.

Source: Nakamura-Tome, October 27, 2026.

Nakamura-Tome AS-200L specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 14, 2026.

What fits a Nakamura-Tome AS-200L

Each of these follows from a published specification above, which is named beside it.

What to check on a Nakamura-Tome AS-200L

• Control generation. The manufacturer specifies FANUC 0i-TF Plus for this model. Units we have tracked run 2018 to 2022; an early one may carry an older control or a retrofit.
• Spindle load. The manufacturer gives 15/11kW (left spindle) or 7.5/5.5kW (right spindle, optional) of spindle power. Take a heavy cut and watch the load meter.
• Axes and way covers. The manufacturer gives Y 82mm of travel. Run each axis end to end and check the way covers.
• Chuck and bar. The manufacturer gives a chuck size of 8″ (left spindle) or 6″ (right spindle, optional) and a bar capacity of 65mm or 71mm (left spindle) or 42mm (right spindle, optional). Check the jaws and the grip pressure; check any bar feeder is set for that bar.
• Bed and ways. The manufacturer gives a max turning diameter of 290mm (12-station turret) or 280mm (optional 15-station turret) and a max turning length of 570mm. Check the ways for wear near the chuck.
• Rotary tools. The manufacturer gives the rotary tooling as 6000 min-1. Check that the rotary tools still drive under load.
• Rigging and floor. The manufacturer gives a floor space of height:1,935mm; width:2,716mm(Standard, Tail) / width:3,160mm(MATA-BEI); depth:1,805mm. Confirm the rigging route and the floor will take that.

Nakamura-Tome AS-200L control

• Control FANUC 0i-TF Plus

Nakamura-Tome AS-200L listing history

Where it was listed

Model years seen

2022, 2021, 2018.

What Nakamura-Tome AS-200L listings agree on

What affects the value of a used Nakamura-Tome AS-200L

• Control. The manufacturer specifies FANUC 0i-TF Plus.
• Build year. The units we tracked were built from 2018 to 2022, across 3 model years.
• Against the published figures. The manufacturer gives spindle motor power 15/11kW (left spindle) or 7.5/5.5kW (right spindle, optional), chuck size 8″ (left spindle) or 6″ (right spindle, optional), bar capacity 65mm or 71mm (left spindle) or 42mm (right spindle, optional) and max turning diameter 290mm (12-station turret) or 280mm (optional 15-station turret).

Looking for a Nakamura-Tome AS-200L for sale?

We have tracked 3 Nakamura-Tome AS-200L listings on 2 marketplaces (machinetools.com and exapro.com), model years 2018 to 2022. We buy Nakamura-Tome AS-200L machines and do not sell them.

2022 · 2021 · 2018

Every Nakamura-Tome AS-200L we have tracked

The Nakamura-Tome AS-200L among lathes and turning centers

Browse all CNC Lathes, or see every Nakamura-Tome machine we track.

Other CNC Lathes models in this directory

1. Nakamura-Tome WT-100: manufacturer specification page, fetched October 27, 2026.
2. Nakamura-Tome AS-200L: manufacturer specification page, fetched October 14, 2026.