2013 Mazak MTV 815/80
Metal Cutting
CNC Vertical Machining Centers (VMC)
Mazak MTV 815/80
4 Mazak MTV 815/80 listings have come through the used market we track: 3 marketplaces, built 2013 where given; 2 early years, each reported by only one marketplace, are left out.
87.56 x 31.9 inTable size
6,000 RPMSpindle speed
CAT 50Spindle taper
60Tool capacity
What the maker publishes about the current Mazak MTV 815/80
Mazak's MTV-815/80 vertical machining center moves 80" in X across an 88.19" × 31.89" table. Spread evenly, up to 6614 lbs may sit on that table, and the MTV series chart caps the workpiece for this size at 88.19" × 31.89" × 34.25". Y and Z strokes come to 31.89" and 29.53". Measured up from the table, the spindle nose ranges between 7.87" and 37.4". BT50 tooling goes in the spindle, which is limited to 6000 rpm; continuous power comes to 15 kW (20 HP), while the 40% ED rating lifts it to 18.5 kW (25 HP). A magazine of 30 pockets serves the automatic tool changer. X and Y move at 945 IPM on rapids, Z at 709 IPM. On a MAZATROL equipped machine, width by length is 223.82" × 173.07"; it is 123.74" high and comes to 30864 lbs.
Source: Mazak, October 27, 2026.
What the Mazak MTV 815/80 is used for
On Mazak's current MTV page the MTV-815/80 shares its 88.19 in table length with the MTV-655/80 but takes a table 31.89 in wide instead of 25.59 in and a 6,614 lb load instead of 5,511 lbs; its column travels back and forth while the table stays open to an overhead crane for loading heavy work.
Source: Mazak, October 27, 2026.
Mazak MTV 815/80 listing history
Where it was listed
exapro.com
2 listings, 2013
quickmachinerysales.com
1 listing
usedcnc.com
1 listing
Sellers also filed it under CNC Horizontal Machining Centers (HMC) (1).
Model years seen
2013.
What Mazak MTV 815/80 listings agree on
Table size
87.56 x 31.9 in
Spindle speed
6,000 RPM
Spindle taper
CAT 50
Tool capacity
60
Looking for a Mazak MTV 815/80 for sale?
We have tracked 4 Mazak MTV 815/80 listings on 3 marketplaces (exapro.com, quickmachinerysales.com and usedcnc.com), model year 2013. We buy Mazak MTV 815/80 machines and do not sell them.
Every Mazak MTV 815/80 we have tracked
3 more listings gave no year or the early years left out above.
The Mazak MTV 815/80 among machining centers and mills
Browse all CNC Vertical Machining Centers (VMC), or see every Mazak machine we track.
Mazak MTV 815/80 variants and related models
Mazak MTV 815/120
Variant
Mazak MTV655/80
Same series
Have a Mazak MTV 815/80 to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
