2022 Mazak INTEGREX E-1250V/8
Metal Cutting
CNC Multi-Tasking Machines (Mill-Turn / Turn-Mill)
Mazak INTEGREX E-1250V/8
5 Mazak INTEGREX E-1250V/8 listings have come through the used market we track: 4 marketplaces, built 2019–2022 where given.
73.82 inX-axis travel
49.21 inY-axis travel
52.95 inZ-axis travel
10,000 RPMSpindle speed
What the maker publishes about the current Mazak INTEGREX E-1250V/8
Mazak's INTEGREX e-1250V/8 is a vertical multi-tasking machine: a turning table spins the work while a separate milling spindle tilts about a B axis, and the INTEGREX e-V page shows it as the 2 pallet changer build. Its largest workpiece is listed as Φ57" × 63", and the table, pallet included, carries 5952 lbs evenly spread. The table is turned by a direct drive motor at up to 500 rpm, with 3434 N･m of continuous torque from 40 kW (53 HP); as a C axis it indexes in 0.0001° steps. The milling spindle takes CAT50 holders, spins to 10000 rpm and is rated 37 kW (50 HP) when run at 40%ED; B axis travel spans 150°. The changer holds 42 tools. Strokes are 74" in X, 49" in Y and 53" in Z, each with a 1654 IPM rapid. Floor space is 205" × 315", height 173" and weight 109127 lbs. Mazak lists the two level PALLETECH HIGH RISE SYSTEM as compatible with this model only.
Source: Mazak, October 27, 2026.
What the Mazak INTEGREX E-1250V/8 is used for
Big workpieces are the INTEGREX e-1250V/8's target on Mazak's 2017 model page: parts such as gearboxes and jet engine casings in titanium, steel or aluminum, cut by five-axis milling, turning, boring and drilling in one setup on a direct-drive table, for parts up to 57.09 in across, while its two pallets let one part be unloaded and the next loaded during the cut; it names aerospace, heavy construction and energy work.
Source: Mazak, an archived copy of the maker's page from 2017, October 28, 2026.
Mazak INTEGREX E-1250V/8 specifications
Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.
Figures as currently published; an older unit may differ in control generation and options.
Capacity and travels
Max turning diameterMax. machining diameter
Φ57"
X-axis travelTravel: X-axis
74"
Y-axis travelTravel: Y-axis
49"
Z-axis travelTravel: Z-axis
53"
Spindle and speed
Max spindle speedMilling spindle: Max. spindle speed
10000 rpmmilling spindle
Spindle motor powerMilling spindle: Spindle motor (40%ED)
37 kW (50 HP)milling spindle, 40%ED
Spindle motor powerMilling spindle: Spindle motor (cont. rating)
30 kW (40 HP)milling spindle, cont. rating
Spindle taperTool shank
CAT50
Rapid traverseRapid traverse rate: X-axis / Y-axis / Z-axis
1654 IPM (X, Y, Z)
Table, turret and tools
Max table loadTable load capacity (evenly distributed) (including pallet)
5952 lbsevenly distributed, including pallet
Tool capacityTool storage capacity
42
Dimensions and weight
Machine weight
109127 lbs
Floor spaceMachine width × length
205" × 315"
Further figures the manufacturer publishes
Max. workpiece size
Φ57" × 63"
Table: Max. spindle speed
500 rpmturning table
Table: Max. torque (cont. rating)
3434 N･mturning table, cont. rating
Table: Spindle motor (cont. rating)
40 kW (53 HP)turning table, cont. rating
Min. indexing angle increment (C-axis)
0.0001°
Milling spindle: Max. torque (30 min. rating)
260 N･mmilling spindle, 30 min. rating
Max. tool diameter
Φ5"
Max. tool length (from gauge line)
26"from gauge line
Max. tool weight
66 lbs
Travel: B-axis
150°
Machine height
173"
- manufacturer specification page, fetched October 27, 2026.
What fits a Mazak INTEGREX E-1250V/8
Each of these follows from a published specification above, which is named beside it.
50-taper toolholders
This is a 50-taper spindle — the 7:24 steep taper that CAT-50, BT-50 and DIN 69871 (SK-50) holders all share. They share the taper and nothing else that matters: the retention knob and the flange form differ between those standards, so holders do not swap between them without changing pull studs. Knowing which standard a machine was tooled for is worth doing before the holders are packed. The manufacturer names CAT for this machine.
Derived from Spindle taper: CAT50
What to check on a Mazak INTEGREX E-1250V/8
- Spindle. The manufacturer gives a spindle speed of 10000 rpm (milling spindle). Run the spindle to top speed and listen for bearing noise.
- Spindle load. The manufacturer gives 37 kW (50 HP) (milling spindle, 40%ED) or 30 kW (40 HP) (milling spindle, cont. rating) of spindle power. Take a heavy cut and watch the load meter.
- Spindle taper. The manufacturer gives a spindle taper of CAT50. Check it for fretting and that the drawbar holds a tool.
- Axes and way covers. The manufacturer gives X 74", Y 49" and Z 53" of travel. Run each axis end to end and check the way covers.
- Rapids and ballscrews. The manufacturer gives a rapid traverse of 1654 IPM (X, Y, Z). Measure the backlash on each axis.
- Tool changer. The manufacturer gives the tool capacity as 42. Cycle every pocket and watch for a hesitation.
- Table. The manufacturer gives a table load of 5952 lbs (evenly distributed, including pallet). Check the table and its T-slots for damage.
- Bed and ways. The manufacturer gives a max turning diameter of Φ57". Check the ways for wear near the chuck.
- Rigging and floor. The manufacturer gives a machine weight of 109127 lbs and a floor space of 205" × 315". Confirm the rigging route and the floor will take that.
When the Mazak INTEGREX E-1250V/8 was built
Mazak had introduced the INTEGREX e-1250V/8 by July 2017: Mazak Corporation's own page for the model was archived by the Wayback Machine on July 10, 2017.
Source: Mazak, an archived copy of the maker's page from 2017, October 28, 2026.
Mazak INTEGREX E-1250V/8 listing history
Where it was listed
quickmachinerysales.com
2 listings, 2019
cncmachines.com
1 listing, 2019
machinetools.com
1 listing
surplusrecord.com
1 listing, 2022
Filed under CNC Multi-Tasking Machines (Mill-Turn / Turn-Mill) (4).
Model years seen
2022, 2019 ×3.
What Mazak INTEGREX E-1250V/8 listings agree on
X-axis travel
73.82 in
Y-axis travel
49.21 in
Z-axis travel
52.95 in
Spindle speed
10,000 RPM
Spindle power
50 hp
What affects the value of a used Mazak INTEGREX E-1250V/8
- Build year. The units we tracked were built from 2019 to 2022, across 2 model years, most often 2019 (3 units).
- Against the published figures. The manufacturer gives max spindle speed 10000 rpm (milling spindle), spindle motor power 37 kW (50 HP) (milling spindle, 40%ED) or 30 kW (40 HP) (milling spindle, cont. rating), tool capacity 42 and max turning diameter Φ57".
Looking for a Mazak INTEGREX E-1250V/8 for sale?
We have tracked 5 Mazak INTEGREX E-1250V/8 listings on 4 marketplaces (quickmachinerysales.com, cncmachines.com, machinetools.com and surplusrecord.com), model years 2019 to 2022. We buy Mazak INTEGREX E-1250V/8 machines and do not sell them.
Every Mazak INTEGREX E-1250V/8 we have tracked
2019 Mazak INTEGREX E-1250V/8
2019 Mazak INTEGREX E-1250V/8
2019 Mazak INTEGREX E-1250V/8
1 more listing, no year.
The Mazak INTEGREX E-1250V/8 among lathes and turning centers
Browse all CNC Multi-Tasking Machines (Mill-Turn / Turn-Mill), or see every Mazak machine we track.
Models related to the Mazak INTEGREX E-1250V/8
Mazak INTEGREX E-650HII
Same series
Have a Mazak INTEGREX E-1250V/8 to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
