2010 Mazak Integrex 400-IV ST (listed as INT400IVST)
CNC Turning Centers
CNC Turning Centers
Mazak Integrex 400-IV ST
4 Mazak Integrex 400-IV ST listings have come through the used market we track: 3 marketplaces, built 2006–2010.
40 hpSpindle power
3,300 RPMSpindle speed
80.2 inMax turning length
15 inChuck size
What the maker published about the Mazak Integrex 400-IV ST
Mazak's INTEGREX 400 IV ST brings the lower turret and the secondary spindle together on one milling and turning machine, and its table describes the 1500 mm universal bed. Twelve inch and ten inch chucks go on the main and secondary spindles, which reach 3,300 and 4,000 min-1 with 30.0 kW and 26.0 kW behind them for 30 minutes. On the main side bar of 102 mm can pass, subject to the chuck system, against 77 mm on the secondary. The upper turret cuts diameters of 760 mm and the lower one, which mounts 9 tools, to 420 mm, while length on this bed is 1,524 mm. On the axes, X has 630 mm, Y 230 mm, Z 1,585 mm and X2 230 mm, while Z2 and W share 1,530 mm. The milling head turns 12,000 min-1 at most, is rated 18.5 kW for 20% ED and draws on 20 magazine pockets.
Source: Mazak, an archived copy of the maker's page from 2014, October 27, 2026.
Mazak Integrex 400-IV ST listing history
Where it was listed
usedcnc.com
2 listings, 2006–2010
exapro.com
1 listing, 2007
quickmachinerysales.com
1 listing, 2006
Sellers also listed it as INT400IVST.
Sellers also filed it under CNC Multi-Tasking Machines (Mill-Turn / Turn-Mill) (2).
Model years seen
2010, 2007, 2006 ×2.
What Mazak Integrex 400-IV ST listings agree on
Max turning length
80.2 in
Chuck size
15 in
Spindle bore
4.4 in
Spindle speed
3,300 RPM
Spindle power
40 hp
Looking for a Mazak Integrex 400-IV ST for sale?
We have tracked 4 Mazak Integrex 400-IV ST listings on 3 marketplaces (usedcnc.com, exapro.com and quickmachinerysales.com), model years 2006 to 2010. We buy Mazak Integrex 400-IV ST machines and do not sell them.
Every Mazak Integrex 400-IV ST we have tracked
2007 Mazak Integrex 400-IV ST
CNC Multi-Tasking Machines (Mill-Turn / Turn-Mill)
2006 Mazak Integrex 400-IV ST (listed as INT400IVST)
CNC Turning Centers
2006 Mazak Integrex 400-IV ST
CNC Multi-Tasking Machines (Mill-Turn / Turn-Mill)
The Mazak Integrex 400-IV ST among lathes and turning centers
Browse all CNC Turning Centers, or see every Mazak machine we track.
Mazak Integrex 400-IV ST variants and related models
Mazak Integrex 400 IV
Variant
Mazak INTEGREX 300 IV S
Same series
Have a Mazak Integrex 400-IV ST to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
