Hyundai WIA L-230LMSA

What the maker published about the Hyundai WIA L-230LMSA

Hyundai WIA built the L230LMSA as a turning center on a one piece bed, and live tooling plus a second spindle were part of the standard build. Work swings up to 21.65 in (550 mm) above the bed and can be turned over a length of 20.51 in (521 mm). The main spindle wears an 8 in chuck, passes bar up to 2.56 in (65 mm), draws 20/14.7 hp (15/11 kW) and climbs to 4,000 rpm. Facing it, a 6 in sub spindle with a C axis indexes by 0.001°, rotates at as much as 5,000 rpm on 7.3/4.9 hp and travels 23.23 in (590 mm) on its own ZB axis, driven by a servo through a ball screw. The X slide gives 8.66 in (220 mm) and Z 22.05 in (560 mm); no Y axis is listed. Rapids read 1,417 ipm for both X and Z, against 1,181 ipm for ZB. Four screws lock every tool into the BMT turret.

Source: Hyundai WIA, an archived copy of the maker's page from 2013, October 27, 2026.

What the Hyundai WIA L-230LMSA is used for

Hyundai WIA America's 2013 page shows a part being both turned and milled inside the L230LMSA, which comes with live tools and a 6 in sub spindle as standard; the sub spindle has its own C axis and ZB slide, the BMT turret bolts each tool down with four screws, and the one-piece bed is slanted at 45 degrees for heavy cuts.

Source: Hyundai WIA, an archived copy of the maker's page from 2013, October 28, 2026.

Hyundai WIA L-230LMSA listing history

Where it was listed

Model years seen

2017, 2012 ×2.

What Hyundai WIA L-230LMSA listings agree on

Looking for a Hyundai WIA L-230LMSA for sale?

We have tracked 4 Hyundai WIA L-230LMSA listings on 2 marketplaces (equipt.com and surplusrecord.com), model years 2012 to 2017. We buy Hyundai WIA L-230LMSA machines and do not sell them.

2017 · 2012 · 2012

Every Hyundai WIA L-230LMSA we have tracked

1 more listing, no year.

The Hyundai WIA L-230LMSA among lathes and turning centers

Browse all CNC Lathes, or see every Hyundai WIA machine we track.

Models related to the Hyundai WIA L-230LMSA