Haas GR-510

What the maker published about the Haas GR-510

Haas lists the GR-510 as a 3-axis CNC gantry router in its Gantry Series, with travels of 121.00 in on X, 61.00 in on Y and 11.00 in on Z. The spindle nose sits roughly 2.5 in to 13.5 in above the table. The CT or BT 40 taper spindle runs to 8100 rpm through a direct speed belt drive and is rated 15.0 hp, with 48.0 ft-lbf of torque at 1500 rpm. The table is 122.0 in long and 53.0 in wide, carries up to 6000 lb spread evenly, and the columns stand 62.0 in apart. An aluminum table, a guard for chips and coolant and a carousel tool changer with 10 pockets are standard; the changer takes tools up to 3.5 in across and 12.0 lb. Cutting feed tops out at 800 ipm, and rapids are 800 ipm on X, 2100 ipm on Y and 1100 ipm on Z. Coolant capacity is 95 gal, and the machine needs 4 scfm of air at 100 psi.

Source: Haas Automation, an archived copy of the maker's page from 2025, October 23, 2026.

What the Haas GR-510 is used for

Haas's GR-510 page says its GR Series gantry routers can cut aluminum and other metals, and plastics and lighter materials at speed, working on large sheets of material or on small parts by the thousand.

Source: Haas Automation, an archived copy of the maker's page from 2025, October 23, 2026.

When the Haas GR-510 was built

Haas called the GR-510 gantry router new in a release dated March 18, 2002, ahead of showing it at WESTEC that March, so the GR-510 was introduced in 2002.

Source: Haas Automation, an archived copy of the maker's page from 2002, October 27, 2026.

Haas GR-510 listing history

Where it was listed

Filed under CNC Gantry & Portal Mills (14).

Model years seen

2023 ×3, 2022 ×4, 2021 ×5, 2020 ×6, 2019, 2018 ×6, 2017 ×3, 2016 ×2, 2014, 2012, 2011 ×6, 2009 ×2, 2006, 2005 ×4, 2004 ×2.

What Haas GR-510 listings agree on

Looking for a Haas GR-510 for sale?

We have tracked 49 Haas GR-510 listings on 8 marketplaces (equipt.com, surplusrecord.com, machinetools.com, revelationmachinery.com, cncmachines.com, machnet.com, kdmachinery.com and theequipmenthub.com), model years 2004 to 2023. We buy Haas GR-510 machines and do not sell them.

2023 · 2023 · 2022 · 2022 · 2022 · 2022 · 2021 · 2021 · 2021 · 2021 · 2021 · 2020 · 2020 · 2020 · 2020 · 2020 · 2020 · 2019 · 2018 · 2018 · 2018 · 2018 · 2018 · 2018 · 2017 · 2017 · 2017 · 2016 · 2016 · 2014 · 2012 · 2011 · 2011 · 2011 · 2011 · 2011 · 2011 · 2009 · 2009 · 2006 · 2005 · 2005 · 2005 · 2005 · 2004 · 2004

Every Haas GR-510 we have tracked

22 more Haas GR-510 machines

2 more listings, no year.

The Haas GR-510 among machining centers and mills

Browse all CNC Gantry & Portal Mills, or see every Haas machine we track.

Other machining centers and mills in this directory