Haas DT-1

What the maker publishes about the current Haas DT-1

Drilling and tapping come first on the Haas DT-1, a compact machine in the Drill/Tap/Mill Series that also mills. A BT30 spindle with inline direct drive reaches 10000 rpm and 15.0 hp, and rigid tapping runs at up to 5000 rpm. Torque peaks at 46.0 ft-lbf at 1700 rpm. The 20+1 tool changer averages 1.75 s tool to tool and 2.00 s chip to chip. Each tool may measure up to 2.0 in across, 7.00 in long and 5.5 lb. Rapids of 2400 ipm apply on X, Y and Z, and feeds cut at up to 1200 ipm. Travel is 20.00 in by 16.00 in by 15.50 in. On the 26.0 in by 15.0 in table, the load limit is 250 lb at full rapid rates or 500 lb when rapids drop to 50%. The spindle nose sits 6.0 in to 21.5 in from the table.

Source: Haas Automation, Inc., September 27, 2026.

Haas DT-1 listing history

Where it was listed

Sellers also filed it under CNC Vertical Machining Centers (VMC) (1 listing).

Model years seen

2019, 2018 (2 units), 2016, 2015 (4 units), 2014 (4 units), 2013 (5 units), 2012 (6 units), 2011 (7 units), 2010 (5 units).

What Haas DT-1 listings agree on

Every Haas DT-1 we have tracked

7 more Haas DT-1 machines

3 more listings gave no year.

The Haas DT-1 among machining centers and mills

Browse all CNC Drilling & Tapping Centers, or see every Haas machine we track.

Other machining centers and mills in this directory