Haas TM-1

What the maker publishes about the current Haas TM-1

Tool capacity on the TM-1 is given as 1, and the machine is a three-axis, 40-taper toolroom mill from the Haas TM Series. X travel reaches 30.00 in, and the Y and Z axes cover 16.00 in apiece. Parts up to 350 lb go onto a 10.5 in by 47.8 in table, which has 3 T-slots. Spindle speed maxes out at 4000 rpm. Drive is by belt, and the spindle rating is 7.5 hp. Peak torque, 33.0 ft-lbf, comes at 1200 rpm. CT or BT 40 toolholders fit the spindle. Every axis moves at 200 ipm in rapid, and cutting feed shares that 200 ipm ceiling. The gap from spindle nose to table can be set anywhere between 20.0 in and 4.0 in. Haas equips it with a conversational programming system, so parts can be programmed without knowing G-code. Input is 220 VAC on either one phase or three, and European machines use three.

Source: Haas Automation, September 27, 2026.

Haas TM-1 listing history

Where it was listed

Sellers also filed it under CNC Milling Machines (1 listing).

Model years seen

2020, 2018 (3 units), 2015, 2013 (4 units), 2012 (2 units), 2011 (3 units), 2010 (2 units), 2009 (2 units), 2008 (6 units), 2007 (8 units), 2006 (6 units), 2005 (9 units), 2004 (6 units), 2003 (6 units), 2002 (7 units), 2001 (8 units).

What Haas TM-1 listings agree on

Every Haas TM-1 we have tracked

45 more Haas TM-1 machines

5 more listings gave no year.

The Haas TM-1 among machining centers and mills

Browse all CNC Vertical Machining Centers (VMC), or see every Haas machine we track.

Other CNC Vertical Machining Centers (VMC) models in this directory