Haas VF-1

What the maker publishes about the current Haas VF-1

Haas names the VF-1 as the foundation of its VF Series: a vertical machining center with three axes and a 40-taper spindle. X motion is 20.00 in, while Y moves 16.00 in and Z moves 20.00 in. Workholding goes on a 26.0 in by 14.0 in table cut with 3 standard T-slots. The evenly spread load limit is 3000 lb. Spindle nose height above the table is 24.0 in at most and 4.0 in at least. Spindle drive is direct and inline, with a ceiling of 8100 rpm and a 30.0 hp maximum rating. Torque of 90.0 ft-lbf arrives at 2000 rpm. An optional gearbox puts 250 ft-lbf on hand at 450 rpm. It takes HSK-A63 holders, and BT40 or CT40 as well. A 20-pocket carousel stores the tools, which may be 3.5 in in full diameter and 12.0 lb each. Average tool-to-tool time is 4.20 s. X, Y and Z all rapid at 1000 ipm, and the top cutting feed is 650 ipm.

Source: Haas Automation, September 27, 2026.

Haas VF-1 listing history

Where it was listed

Model years seen

2026, 2024 (3 units), 2020 (4 units), 2018 (3 units), 2017 (5 units), 2016 (6 units), 2015 (5 units), 2014, 2013 (5 units), 2012 (4 units), 2011, 2010, 2008 (2 units), 2007 (3 units), 2006 (2 units), 2005 (5 units), 2004 (3 units), 2003 (2 units), 2002, 2001 (3 units), 2000 (5 units), 1999 (2 units), 1998 (3 units), 1997 (2 units), 1996 (2 units), 1995 (3 units), 1993, 1991, 1990.

What Haas VF-1 listings agree on

Every Haas VF-1 we have tracked

56 more Haas VF-1 machines

5 more listings gave no year.

The Haas VF-1 among machining centers and mills

Browse all CNC Vertical Machining Centers (VMC), or see every Haas machine we track.

Other CNC Vertical Machining Centers (VMC) models in this directory