Doosan VM 960L

What the maker publishes about the current Doosan VM 960L

DN Solutions builds the VM 960L, a vertical machining center in its VM die and mold line, which also lists the VM 750, 750L, 960 and 1260. Travel runs 2400 mm in X, 960 mm in Y and 800 mm in Z, or 94, 38 and 31 inch, and each of the three axes rapids at 16 m/min (630 ipm). The spindle reaches 6000 r/min and is rated at 18.5 kW, given as 25 hp in the imperial table. Work sits on a table 2600 mm long and 950 mm wide, which carries a workpiece of up to 4500 kg (9921 lb). In the dimensions table the VM 960L measures 4846 mm long, 3545 mm high and 6800 mm wide, and it weighs 21000 kg. No tool magazine figure is printed for this model.

Source: DN Solutions, October 26, 2026.

What the Doosan VM 960L is used for

DN Solutions makes the VM 960L the long-table member of its VM die and mold line: against the VM 960 its table grows from 2,400 to 2,600 mm and its X stroke from 2,000 to 2,400 mm, and the load limit rises from 4,000 to 4,500 kg, while the 960 mm Y and 800 mm Z travels are unchanged.

Source: DN Solutions, October 28, 2026.

Doosan VM 960L specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 26, 2026.

What to check on a Doosan VM 960L

• Spindle. The manufacturer gives a spindle speed of 6000 r/min. Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 18.5 kW of spindle power. Take a heavy cut and watch the load meter.
• Axes and way covers. The manufacturer gives X 2400 mm, Y 960 mm and Z 800 mm of travel. Run each axis end to end and check the way covers.
• Rapids and ballscrews. The manufacturer gives a rapid traverse of 16 m/min (X, Y and Z). Measure the backlash on each axis.
• Table. The manufacturer gives a table size of 2600 mm x 950 mm (printed as two rows, Table Length 2600 mm and Table Width 950 mm) and a table load of 4500 kg. Check the table and its T-slots for damage.
• Rigging and floor. The manufacturer gives a machine weight of 21000 kg, a length of 4846 mm, a width of 6800 mm and a height of 3545 mm. Confirm the rigging route and the floor will take that.

Doosan VM 960L listing history

Where it was listed

Filed under CNC Vertical Machining Centers (VMC) (14).

Model years seen

2022, 2020, 2019 ×2, 2017 ×2, 2016 ×2, 2014 ×3, 2013, 2012 ×3.

What Doosan VM 960L listings agree on

What affects the value of a used Doosan VM 960L

• Options. The units we tracked split on tool capacity (30 on 6 machines, 40 on 2 machines).
• Build year. The units we tracked were built from 2012 to 2022, across 8 model years.
• Against the published figures. The manufacturer gives max spindle speed 6000 r/min, spindle motor power 18.5 kW, X-axis travel 2400 mm and Y-axis travel 960 mm.

Looking for a Doosan VM 960L for sale?

We have tracked 16 Doosan VM 960L listings on 4 marketplaces (usedcnc.com, exapro.com, surplusrecord.com and usedmachinerysales.com), model years 2012 to 2022. We buy Doosan VM 960L machines and do not sell them.

2022 · 2020 · 2019 · 2017 · 2017 · 2016 · 2014 · 2014 · 2013 · 2012 · 2012 · year not given

Every Doosan VM 960L we have tracked

The Doosan VM 960L among machining centers and mills

Browse all CNC Vertical Machining Centers (VMC), or see every Doosan machine we track.

Doosan VM 960L variants and related models