2015 Doosan VCF 850L II
CNC Vertical Machining Centers (VMC)
CNC Vertical Machining Centers (VMC)
Doosan VCF 850L II
2 Doosan VCF 850L II listings have come through the used market we track, all built 2015.
30 hpSpindle power
60Tool capacity
52,900 lbMachine weight
What the maker publishes about the current Doosan VCF 850L II
DN Solutions sorts the VCF 850L II into its VCF series, vertical machining centers that the maker headlines as traveling column machines with several work zones. X is the long axis here, 3000 mm (118 inch), while Y covers 850 mm (33 inch) and Z covers 800 mm (31 inch). For rapid moves the page gives 40 m/min (1575 ipm) for X, Y and Z alike. Spindle speed goes as high as 12000 r/min. Parts are clamped to a 3500 mm by 870 mm table (138 by 34 inch) that carries loads to 3500 kg, or 7716 lb. In plan the machine is 3795 mm long and 5440 mm wide, it rises 3253 mm, and it weighs 24000 kg (52911 lb). On the same page, the VCF 850LSR II block repeats every one of these figures.
Source: DN Solutions, October 27, 2026.
What the Doosan VCF 850L II is used for
DN Solutions heads its VCF series as traveling-column verticals with more than one work zone, and the VCF 850L II gives the column a 3,000 mm X stroke over a 3,500 mm table, a meter more travel than the VCF 850SR II; the maker names a rotary table and a center partition among the options for running more than one kind of job on the machine.
Source: DN Solutions, October 28, 2026.
Doosan VCF 850L II specifications
Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.
Figures as currently published; an older unit may differ in control generation and options.
Capacity and travels
X-axis travelX-Axis Travel Distance
3000 mm
Y-axis travelY-Axis Travel Distance
850 mm
Z-axis travelZ-Axis Travel Distance
800 mm
Spindle and speed
Max spindle speedMax. Spindle Speed
12000 r/min
Rapid traverseX / Y / Z-Axis Rapid Traverse
40 m/minsame figure on X, Y and Z
Table, turret and tools
Table sizeTable Length / Table Width
3500 mm x 870 mmlength x width
Max table loadMaximum Workpiece weight
3500 kg
Dimensions and weight
Machine weightWeight (DIMENSIONS)
24000 kg
Floor spaceLength / Width (DIMENSIONS)
3795 mm x 5440 mmlength x width
Further figures the manufacturer publishes
Height (DIMENSIONS)
3253 mm
- manufacturer specification page, fetched October 27, 2026.
What to check on a Doosan VCF 850L II
- Spindle. The manufacturer gives a spindle speed of 12000 r/min. Run the spindle to top speed and listen for bearing noise.
- Axes and way covers. The manufacturer gives X 3000 mm, Y 850 mm and Z 800 mm of travel. Run each axis end to end and check the way covers.
- Rapids and ballscrews. The manufacturer gives a rapid traverse of 40 m/min (same figure on X, Y and Z). Measure the backlash on each axis.
- Table. The manufacturer gives a table size of 3500 mm x 870 mm (length x width) and a table load of 3500 kg. Check the table and its T-slots for damage.
- Rigging and floor. The manufacturer gives a machine weight of 24000 kg and a floor space of 3795 mm x 5440 mm (length x width). Confirm the rigging route and the floor will take that.
Doosan VCF 850L II listing history
Where it was listed
surplusrecord.com
2 listings, 2015
Model years seen
2015 ×2.
What Doosan VCF 850L II listings agree on
Spindle power
30 hp
Tool capacity
60
Machine weight
52,900 lb
Looking for a Doosan VCF 850L II for sale?
We have tracked 2 Doosan VCF 850L II listings on 1 marketplace (surplusrecord.com), model year 2015. We buy Doosan VCF 850L II machines and do not sell them.
Every Doosan VCF 850L II we have tracked
2015 Doosan VCF 850L II
CNC Vertical Machining Centers (VMC)
The Doosan VCF 850L II among machining centers and mills
Browse all CNC Vertical Machining Centers (VMC), or see every Doosan machine we track.
Doosan VCF 850L II variants
Doosan VCF 850LSR
Variant
Have a Doosan VCF 850L II to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
