2020 Doosan VC430
2 listings (machnet.com, surplusrecord.com)
Spindle speed
10,000 RPM
Tool capacity
30
CNC Vertical Machining Centers (VMC)
Doosan VC430
14 Doosan VC430 listings have come through the used market we track: 7 marketplaces, built 2011–2020 where given; 11 machines once repeats are merged.
22.4 inZ-axis travel
17,226 lbMachine weight
22 inX-axis travel
12,000 RPMSpindle speed; 10,000 RPM on others
What the maker publishes about the current Doosan VC430
DN Solutions makes the VC 430, a vertical machining center from its VC series, which the maker describes as twin pallet machines built on a moving column. Axis travel is 560 mm in X, 430 mm in Y and 570 mm in Z, or 22, 17 and 22 inch. The X and Y axes rapid at 40 m/min (1575 ipm), and Z rapids at 36 m/min (1417 ipm). The spindle turns to 10000 r/min and delivers up to 117.7 N·m of torque. In the dimensions table the machine is 2890 mm long, 3030 mm high and 2200 mm wide, and its weight is 7800 kg.
Source: DN Solutions, October 24, 2026.
What the Doosan VC430 is used for
DN Solutions' automotive solutions page names the VC 430, a twin-table vertical machining center, as its machine for caliper carriers.
Source: DN Solutions, October 27, 2026.
Doosan VC430 specifications
Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.
Figures as currently published; an older unit may differ in control generation and options.
Capacity and travels
X-axis travelX-Axis Travel Distance
560 mm
Y-axis travelY-Axis Travel Distance
430 mm
Z-axis travelZ-Axis Travel Distance
570 mm
Spindle and speed
Max spindle speedMax. Spindle Speed
10000 r/min
Rapid traverseX-/Y-Axis Rapid Traverse
40 m/minX and Y; Z is 36 m/min
Dimensions and weight
Machine weightWeight
7800 kg
Further figures the manufacturer publishes
Z-Axis Rapid Traverse
36 m/min
Max. Spindle Torque
117.7 N·m
Length
2890 mm
Height
3030 mm
Width
2200 mm
- manufacturer specification page, fetched October 24, 2026.
What to check on a Doosan VC430
- Spindle. The manufacturer gives a spindle speed of 10000 r/min. Run the spindle to top speed and listen for bearing noise.
- Spindle load. The manufacturer gives 117.7 N·m of spindle torque. Take a heavy cut and watch the load meter.
- Axes and way covers. The manufacturer gives X 560 mm, Y 430 mm and Z 570 mm of travel. Run each axis end to end and check the way covers.
- Rapids and ballscrews. The manufacturer gives a rapid traverse of 40 m/min (X and Y; Z is 36 m/min). Measure the backlash on each axis.
- Rigging and floor. The manufacturer gives a machine weight of 7800 kg, a length of 2890 mm, a width of 2200 mm and a height of 3030 mm. Confirm the rigging route and the floor will take that.
Doosan VC430 listing history
Where it was listed
machinetools.com
4 listings, 2011–2012
surplusrecord.com
4 listings, 2011–2020
exapro.com
2 listings, 2016–2018
equipt.com
1 listing, 2020
machnet.com
1 listing, 2020
revelationmachinery.com
1 listing, 2020
usedmachinerysales.com
1 listing, 2012
Filed under CNC Vertical Machining Centers (VMC) (12).
Model years seen
2020 ×4, 2018, 2016, 2012 ×3, 2011 ×4.
What Doosan VC430 listings agree on
X-axis travel
22 in
Y-axis travel
16.9 in
Z-axis travel
22.4 in
Table size
19 x 28 in
Spindle speed
12,000 RPM (5 machines); 10,000 RPM (2 machines)
Spindle power
25 hp
Spindle taper
CAT 40
Tool capacity
30 (3 machines); 40 (2 machines)
Machine weight
17,226 lb
What affects the value of a used Doosan VC430
- Options. The units we tracked split on spindle speed (12,000 RPM on 5 machines, 10,000 RPM on 2 machines) and tool capacity (30 on 3 machines, 40 on 2 machines).
- Build year. The units we tracked were built from 2011 to 2020, across 5 model years.
- Against the published figures. The manufacturer gives max spindle speed 10000 r/min, X-axis travel 560 mm, Y-axis travel 430 mm and Z-axis travel 570 mm.
Looking for a Doosan VC430 for sale?
We have tracked 14 Doosan VC430 listings on 7 marketplaces (machinetools.com, surplusrecord.com, exapro.com, equipt.com, machnet.com, revelationmachinery.com and usedmachinerysales.com), model years 2011 to 2020. We buy Doosan VC430 machines and do not sell them.
2020 · 2020 · 2020 · 2018 · 2016 · 2012 · 2012 · 2011 · 2011 · 2011
Every Doosan VC430 we have tracked
2020 Doosan VC430
2020 Doosan VC430
2018 Doosan VC430
2016 Doosan VC430
Spindle speed
12,000 RPM
Tool capacity
30
2012 Doosan VC430
2 listings (machinetools.com)
Spindle speed
12,000 RPM
2012 Doosan VC430
Spindle speed
12,000 RPM
Tool capacity
40
2011 Doosan VC430
2 listings (surplusrecord.com)
Spindle speed
12,000 RPM
Tool capacity
40
2011 Doosan VC430
Spindle speed
12,000 RPM
Tool capacity
30
2011 Doosan VC430
Spindle speed
10,000 RPM
1 more listing, no year.
The Doosan VC430 among machining centers and mills
Browse all CNC Vertical Machining Centers (VMC), or see every Doosan machine we track.
Models related to the Doosan VC430
Doosan VC 510
Same series
Have a Doosan VC430 to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
