Doosan PUMA 5100C

What the maker publishes about the current Doosan PUMA 5100C

PUMA 5100C is a heavy duty horizontal lathe from the PUMA 4100/5100 series, which DN Solutions files with its two-axis turning centers. No chuck diameter is printed for it; the maker's table marks the chuck size as order made. Spindle torque peaks at 4466 N·m (3294 ft-lb) from a 45 kW (60 hp) drive, and the speed limit is 1000 r/min. The turning limits are 650 mm (26 inch) for diameter and 1032 mm (41 inch) for length. The cross slide has 362 mm of X stroke and the carriage 1105 mm along Z; X rapids at 16 m/min, Z at 20 m/min. Tooling goes on a 10 station turret. Its footprint is 4759 mm by 2056 mm, its height 2194 mm, and the table gives 10650 kg (23479 lb) as its weight.

Source: DN Solutions, October 27, 2026.

What the Doosan PUMA 5100C is used for

The European DN Solutions table lists the PUMA 5100C's chuck as order made, and the model gives up top speed for torque, 1,000 r/min against the 5100B's 1,500 r/min, through a two-speed gearbox, on oil and gas work as large as 650 mm across and 1,032 mm long.

Source: DN Solutions, October 28, 2026.

Doosan PUMA 5100C specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 27, 2026.

What to check on a Doosan PUMA 5100C

• Spindle. The manufacturer gives a spindle speed of 1000 r/min. Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 45 kW of spindle power and 4466 N·m of spindle torque. Take a heavy cut and watch the load meter.
• Axes and way covers. The manufacturer gives X 362 mm and Z 1105 mm of travel. Run each axis end to end and check the way covers.
• Turret. The manufacturer gives the turret stations as 10 ea. Index every station and time a full turn.
• Bed and ways. The manufacturer gives a max turning diameter of 650 mm and a max turning length of 1032 mm. Check the ways for wear near the chuck.
• Rigging and floor. The manufacturer gives a machine weight of 10650 kg, a length of 4759 mm, a width of 2056 mm and a height of 2194 mm. Confirm the rigging route and the floor will take that.

Doosan PUMA 5100C listing history

Where it was listed

Filed under CNC Lathes (3).

Model years seen

2018 ×2, 2017.

What Doosan PUMA 5100C listings agree on

What affects the value of a used Doosan PUMA 5100C

• Build year. The units we tracked were built from 2017 to 2018, across 2 model years, most often 2018 (2 units).
• Against the published figures. The manufacturer gives max spindle speed 1000 r/min, spindle motor power 45 kW, turret stations 10 ea and max turning diameter 650 mm.

Looking for a Doosan PUMA 5100C for sale?

We have tracked 3 Doosan PUMA 5100C listings on 2 marketplaces (machinetools.com and usedcnc.com), model years 2017 to 2018. We buy Doosan PUMA 5100C machines and do not sell them.

2018 · 2018 · 2017

Every Doosan PUMA 5100C we have tracked

The Doosan PUMA 5100C among lathes and turning centers

Browse all CNC Lathes, or see every Doosan machine we track.

Doosan PUMA 5100C variants and related models

1. Doosan PUMA 5100 LMB: manufacturer specification page, fetched October 14, 2026.
2. Doosan PUMA 5100C: manufacturer specification page, fetched October 27, 2026.