CNC Vertical Machining Centers (VMC)

Doosan MYNX 7500/50II

2 Doosan MYNX 7500/50II listings have come through the used market we track: 2 marketplaces, built 2021–2023.

24Tool capacity

What the maker publishes about the current Doosan MYNX 7500/50II

On the Mynx 7500/50 II, a DN Solutions vertical machining center from the Mynx II series, a 1600 mm by 750 mm (63 by 30 inch) work table carries at most 1500 kg (3307 lb). Its X stroke spans 1525 mm (60 inch), and along Y the machine gives 770 mm (30 inch), inside the 550 mm to 950 mm Y range DN Solutions gives for its Mynx line-up. Head movement on Z amounts to 625 mm (25 inch). Rapid traverse reaches 30 m/min (1181 ipm) on X and on Y, and 24 m/min (945 ipm) on Z. This variant's spindle is an ISO #50 type, powered at 18.5 kW (25 hp); its top speed is 6000 r/min. The machine's own mass is 13500 kg (29762 lb). The Mynx 7500 II has the same strokes and table but a different head, at 8000 r/min and 15 kW.

Source: DN Solutions, October 27, 2026.

What the Doosan MYNX 7500/50II is used for

DN Solutions' European page lists 24, 30 and 40 tool magazines for the Mynx II mills and says they change large, heavy tools; the 7500/50 II pairs an ISO 50, 25 hp spindle with 1,525 mm of X travel and a 1,600 by 750 mm table that carries up to 1,500 kg.

Source: DN Solutions, October 28, 2026.