Doosan DVF6500

What the maker publishes about the current Doosan DVF6500

DN Solutions classes the DVF 6500 as a five-axis vertical machining center within its DVF series. X travels 750 mm, Y 785 mm and Z 600 mm (30, 31 and 24 inch), and beyond those linear axes its feed rate table names a B axis and a C axis. Linear rapids are 45 m/min, or 1772 ipm, on each axis. The C axis rapids at 50 r/min, with 80 r/min in braces as an option, while the B axis rapids at 25 r/min. Work mounts on a rotary table 650 mm in diameter that carries up to 600 kg (1323 lb). An ISO #40 spindle runs to 12000 r/min as standard and to 18000 r/min with the braced option. It is rated at 22/18.5 kW (30/25 hp). Peak torque is 204 N·m (151 ft-lb), while 118 N·m appears in braces. The magazine has 40 tool stations. Overall the machine is 3700 mm long, 2450 mm wide and 3100 mm tall, and its weight is 14500 kg.

Source: DN Solutions, October 26, 2026.

What the Doosan DVF6500 is used for

For its DVF five-axis line, the DVF 6500 among them, DN Solutions names close-tolerance shaped parts finished in one clamping as the target, and lists unattended running for the series through tool magazines of up to 120 tools, a multi-pallet system and compact AWC, RPS and LPS cells (the DVF 6500's own magazine is 40 tools).

Source: DN Solutions, October 26, 2026.

Doosan DVF6500 specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 26, 2026.

What fits a Doosan DVF6500

Each of these follows from a published specification above, which is named beside it.

What to check on a Doosan DVF6500

• Spindle. The manufacturer gives a spindle speed of 12000 r/min (standard; {18000} r/min printed in braces as the option). Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 22/18.5 kW of spindle power and 204 N·m (standard; {118} N·m printed in braces as the option) of spindle torque. Take a heavy cut and watch the load meter.
• Spindle taper. The manufacturer gives a spindle taper of ISO #40. Check it for fretting and that the drawbar holds a tool.
• Axes and way covers. The manufacturer gives X 750 mm, Y 785 mm and Z 600 mm of travel. Run each axis end to end and check the way covers.
• Rapids and ballscrews. The manufacturer gives a rapid traverse of 45 m/min (X, Y and Z). Measure the backlash on each axis.
• Tool changer. The manufacturer gives the tool capacity as 40 ea. Cycle every pocket and watch for a hesitation.
• Table. The manufacturer gives a table size of 650 mm (rotary table diameter) and a table load of 600 kg. Check the table and its T-slots for damage.
• Rotary axes. The manufacturer gives 5-Axis (DVF series heading; every column on the page is a DVF model) axes. Run each rotary axis through its range.
• Rigging and floor. The manufacturer gives a machine weight of 14500 kg, a length of 3700 mm, a width of 2450 mm and a height of 3100 mm. Confirm the rigging route and the floor will take that.

Doosan DVF6500 listing history

Where it was listed

Filed under CNC Vertical Machining Centers (VMC) (7) and CNC 5-Axis Machining Centers (1).

Model years seen

2023 ×2, 2022 ×4, 2021 ×4, 2020 ×2.

What Doosan DVF6500 listings agree on

What affects the value of a used Doosan DVF6500

• Options. The units we tracked split on spindle speed (18,000 RPM on 4 machines, 12,000 RPM on 2 machines).
• Build year. The units we tracked were built from 2020 to 2023, across 4 model years.
• Against the published figures. The manufacturer gives max spindle speed 12000 r/min (standard; {18000} r/min printed in braces as the option), spindle motor power 22/18.5 kW, tool capacity 40 ea and X-axis travel 750 mm.

Looking for a Doosan DVF6500 for sale?

We have tracked 13 Doosan DVF6500 listings on 4 marketplaces (machinetools.com, surplusrecord.com, equipt.com and usedmachinerysales.com), model years 2020 to 2023. We buy Doosan DVF6500 machines and do not sell them.

2023 · 2023 · 2022 · 2021 · 2021 · 2020 · 2020 · year not given

Every Doosan DVF6500 we have tracked

The Doosan DVF6500 among machining centers and mills

Browse all CNC Vertical Machining Centers (VMC), or see every Doosan machine we track.

Models related to the Doosan DVF6500