Doosan DBC 110S

What the maker publishes about the current Doosan DBC 110S

Among the boring mills in DN Solutions' DBC series sits the DBC 110S, a horizontal machine with 2000 mm of X travel, 1500 mm of Y travel and 1200 mm of Z travel (79, 59 and 47 inch). Rapids on X, Y and Z come to 12 m/min apiece, or 472 ipm. Its spindle, fitted for ISO #50 tooling, turns at up to 3000 r/min and is rated at 26 kW, with torque listed at 1104 N·m (814 ft-lb). Workpieces of as much as 7000 kg can rest on a table that is 1600 mm by 1400 mm. Measured overall, the DBC 110S takes up 5540 mm of length and 5930 mm of width and stands 4200 mm tall. The complete machine weighs 29000 kg. The maker groups this series under boring mills of medium to large capacity.

Source: DN Solutions, October 26, 2026.

Doosan DBC 110S specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 26, 2026.

What fits a Doosan DBC 110S

Each of these follows from a published specification above, which is named beside it.

What to check on a Doosan DBC 110S

• Spindle. The manufacturer gives a spindle speed of 3000 r/min. Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 26 kW of spindle power and 1104 N·m of spindle torque. Take a heavy cut and watch the load meter.
• Spindle taper. The manufacturer gives a spindle taper of ISO #50. Check it for fretting and that the drawbar holds a tool.
• Axes and way covers. The manufacturer gives X 2000 mm, Y 1500 mm and Z 1200 mm of travel. Run each axis end to end and check the way covers.
• Rapids and ballscrews. The manufacturer gives a rapid traverse of 12 m/min (X, Y and Z) (X, Y and Z rows of the DBC 110S column, each 12 m/min). Measure the backlash on each axis.
• Table. The manufacturer gives a table size of 1600 mm x 1400 mm (printed as two rows, Table Length 1600 mm and Table Width 1400 mm) and a table load of 7000 kg. Check the table and its T-slots for damage.
• Rigging and floor. The manufacturer gives a machine weight of 29000 kg, a length of 5540 mm, a width of 5930 mm and a height of 4200 mm. Confirm the rigging route and the floor will take that.

Doosan DBC 110S listing history

Where it was listed

Filed under CNC Boring Mills (6), CNC Gantry & Portal Mills (1), CNC Horizontal Machining Centers (HMC) (1) and CNC Vertical Machining Centers (VMC) (1).

Model years seen

2015, 2014, 2013, 2012 ×3, 2011 ×2.

What Doosan DBC 110S listings agree on

What affects the value of a used Doosan DBC 110S

• Options. The units we tracked split on spindle speed (3,000 RPM on 5 machines, 2,500 RPM on 2 machines) and tool capacity (40 on 2 machines, 60 on 2 machines).
• Build year. The units we tracked were built from 2011 to 2015, across 5 model years, most often 2012 (3 units).
• Against the published figures. The manufacturer gives max spindle speed 3000 r/min, spindle motor power 26 kW, X-axis travel 2000 mm and Y-axis travel 1500 mm.

Looking for a Doosan DBC 110S for sale?

We have tracked 12 Doosan DBC 110S listings on 4 marketplaces (machinetools.com, usedcnc.com, exapro.com and surplusrecord.com), model years 2011 to 2015. We buy Doosan DBC 110S machines and do not sell them.

2015 · 2014 · 2013 · 2012 · 2012 · 2011 · 2011 · year not given

Every Doosan DBC 110S we have tracked

3 more listings, no year.

The Doosan DBC 110S among machining centers and mills

Browse all CNC Boring Mills, or see every Doosan machine we track.

Doosan DBC 110S variants and related models