DMG MORI DMU-210P

What the maker publishes about the current DMG MORI DMU-210P

DMG MORI builds the DMU 210 P as a 5-axis milling machine of gantry layout, in which the cross beam travels vertically and hydraulics balance its weight. Axis travel is 2100 mm in X, 2100 mm in Y and 1250 mm in Z. Parts may measure up to 2500 mm across and 1460 mm high and weigh up to 8000 kg, or 5000 kg on the FD type. The FD version is an option that adds turning on a DirectDrive table rated to 5,015.4 ft lb. Spindle choices include the powerMASTER, a motor spindle rated to 737.6 ft lb, and the torqueMASTER, a gear spindle rated to 1,327.6 ft lb; for the 2nd generation, speedMASTER spindles reaching 30,000 rpm are listed as well. A wheel magazine takes up to 303 tools. Feed speed reaches 2,362.2 ipm and feed force 8,992.4 lbf. The machine rests on 3 support points and needs no foundation, and a 980 l band filter unit comes standard. Control choices are SIEMENS and HEIDENHAIN.

Source: DMG MORI, October 27, 2026.

What the DMG MORI DMU-210P is used for

DMG MORI's 2016 release for the DMU 210 P 2nd generation pictures an aerospace compressor housing as a sample part, with 5-sided and simultaneous 5-axis machining through its B axis and an A axis as an option.

Source: DMG MORI, October 27, 2026.

DMG MORI DMU-210P specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 27, 2026.

What to check on a DMG MORI DMU-210P

• Control generation. The manufacturer specifies SIEMENS or HEIDENHAIN for this model. Units we have tracked run 2009 to 2020; an early one may carry an older control or a retrofit.
• Axes and way covers. The manufacturer gives X 2100 mm, Y 2100 mm and Z 1250 mm of travel. Run each axis end to end and check the way covers.
• Tool changer. The manufacturer gives the tool capacity as up to 303 tools. Cycle every pocket and watch for a hesitation.
• Table. The manufacturer gives a table load of 8000 kg. Check the table and its T-slots for damage.
• Work envelope. The manufacturer gives max. workpiece diameter 2500 mm and max. workpiece height 1460 mm. Measure your largest part, with its fixture, against that.

DMG MORI DMU-210P control and manuals

• Control SIEMENS or HEIDENHAIN

DMG MORI announced its my DMG MORI customer portal in 2019, first in Europe, as the place where registered customers find the operating instructions and service records for their machines.

Source: DMG MORI, October 24, 2026.

DMG MORI DMU-210P listing history

Where it was listed

Sellers also filed it under CNC 5-Axis Machining Centers (1).

Model years seen

2020, 2015, 2014 ×2, 2013, 2011, 2009.

What DMG MORI DMU-210P listings agree on

What affects the value of a used DMG MORI DMU-210P

• Control. The manufacturer specifies SIEMENS or HEIDENHAIN.
• Build year. The units we tracked were built from 2009 to 2020, across 6 model years, most often 2014 (2 units).
• Against the published figures. The manufacturer gives tool capacity up to 303 tools, X-axis travel 2100 mm, Y-axis travel 2100 mm and Z-axis travel 1250 mm.

Looking for a DMG MORI DMU-210P for sale?

We have tracked 7 DMG MORI DMU-210P listings on 5 marketplaces (machinetools.com, equipt.com, surplusrecord.com, usedcnc.com and usedmachinerysales.com), model years 2009 to 2020. We buy DMG MORI DMU-210P machines and do not sell them.

2020 · 2015 · 2014 · 2013 · 2011 · 2009

Every DMG MORI DMU-210P we have tracked

The DMG MORI DMU-210P among machining centers and mills

Browse all CNC Vertical Machining Centers (VMC), or see every DMG MORI machine we track.

Models related to the DMG MORI DMU-210P