Mazak FH-6800
Manufacturer specifications, what it is built to do, the years we have seen them listed, what tooling fits, and what to check on one. MTE also buys them outright.
What the Mazak FH-6800 is
The Mazak FH-6800 is a CNC horizontal machining center — a machine for production milling with a horizontal spindle and pallet changer, so one pallet runs while the next is being loaded — chips fall clear and the machine runs unattended. The manufacturer publishes a pallet size of 24.8″ x 24.8″. This one is specified with a pallet changer: one pallet runs while the next is loaded.
What it is built to do
From the figures the manufacturer publishes, a Mazak FH-6800 suits:
- one 24.8″ x 24.8″ pallet cutting while the next is loaded
Mazak FH-6800 specifications
2 independent dealer listings were used, cross-checked against each other, and are recorded in our sourcing record.
What fits a Mazak FH-6800
Each of these follows from a published specification above, which is named beside it.
Pallets and fixturing
Fixtures, tombstones and spare pallets are cut for a pallet of this size and do not transfer to another machine. On a horizontal they are a large share of what is being sold, so count them before quoting.
Derived from — Pallet size: 24.8″ x 24.8″
What years the Mazak FH-6800 was built
Across the units we have tracked, build years run from 1998 to 2007. Observed across 25 marketplaces, not a manufacturer build record. The manufacturer specifies Mazatrol Fusion 640M, so a unit on an older control is an early one or a retrofit.
Mazak FH-6800 machines on the market now
We track listings across 25 used-machinery marketplaces, and every competitor in this market is one of them, so this is a view none of them can produce for themselves. Right now there are 11 units of this exact designation on the market, drawn from 5 independent sources, spanning model years 1998 to 2007. A seller is competing with those units, which is why condition, tooling and control generation decide the number.
We count only listings whose model is spelled as this machine’s own designation. Near spellings that may be a different variant are excluded rather than counted, so this is a floor on what is out there, not a total.
- Mazak FH6800 (2007) (also listed here)
- Mazak FH-6800 (2006) (also listed here)
- Mazak FH6800 (2006) (also listed here)
- Mazak FH6800 (2004)
- Mazak FH-6800 (2003)
- Mazak FH-6800 (2002)
- Mazak FH6800 (2002) (also listed here)
- Mazak FH 6800 (2000) (also listed here)
- Mazak FH6800 (1998)
- Mazak FH-6800
- Mazak FH6800 (also listed here)
What affects the value of a used Mazak FH-6800
- Control. The dealer listings give Mazatrol Fusion 640M.
- Build year. The units we tracked were built from 1998 to 2007, across 7 model years.
- Against the published figures. The dealer listings give max spindle speed 10,000 RPM, spindle motor power 50 / 40 HP, X-axis travel 41.34″ and pallet size 24.8″ x 24.8″.
What to check on a Mazak FH-6800
The same list whichever side of the deal you are on.
- Control generation. The manufacturer specifies Mazatrol Fusion 640M for this model. The control is often the single biggest swing on two otherwise identical machines, because it decides which buyers can use it at all.
- Spindle hours and condition. Most controls show run hours on a maintenance or diagnostics screen. It is the first number anyone asks for, so find it before the conversation rather than during it.
- Tooling and accessories. Holders, chucks, steady rests, probing and automation attachments travel with the machine, and they are worth real money separately from it.
- The pallet changer, through a full cycle. A pallet changer that hesitates is the first thing a buyer will find.
- How many pallets and fixtures come with it. On an HMC this is a large part of the number.
- B-axis table condition and backlash, and the chip conveyor, which on a horizontal does real work.
- Power and rigging access. How the machine comes out of the building is a real cost, so an accessible machine is worth more to us.
Mazak FH-6800 control and manuals
- Control Mazatrol Fusion 640M
Mazak's UK site says its iCONNECT customer portal holds the manuals and machine specifications for each machine a registered Mazak customer owns.
Source: Mazak, October 24, 2026.
Machines buyers cross-shop with the Mazak FH-6800
Other CNC horizontal machining centers in this directory, closest first on pallet size.
Makino A81NX
- Pallet size
- 630 mm x 630 mm
- X-axis travel
- 900 mm
- Y-axis travel
- 900 mm
- Spindle taper
- CAT50 (HSK-A100 opt)
Makino A61NX-5E
- Pallet size
- 400 × 400 mm
- X-axis travel
- 730 mm
- Y-axis travel
- 730 mm
Mazak HCN-4000
- Pallet size
- 15.750 in / 400 mm
- X-axis travel
- 22"
- Y-axis travel
- 25"
- Spindle taper
- CAT No.40
The rest of the CNC horizontal machining centers in this directory: Mazak FH480X · Mazak H-400N · Mazak HTC 400
Browse the whole CNC Horizontal Machining Centers (HMC) catalog, or see everything we buy from Mazak.
Have a Mazak FH-6800 to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
