Direct procurement1998 Model

Sell your Okuma crown 769 l1420 cnc lathe today.

MTE does not act as a broker, nor do we buy on consignment. We buy machinery and assets outright and arrange the pickup.

Make: Okuma
Model: crown 769 l1420 cnc lathe
Year: 1998
Category: CNC Lathes
Condition: Used / Surplus

Jason PuuriOwner, Superior Machine & Tool, Inc.Message From MTE Owner

Jason sets final pricing on the machines MTE buys.

Okuma crown 769 l1420 cnc lathe Specifications

Z-Axis (Upper/Lower Turret): Not Found
Upper Turret Positions: Not Found
Horsepower Of Rotary Tools: Not Found
Sub Spindle Bar Capacity: Not Found
Bar Capacity Right And Left Spindles: Not Found
Chip Conveyor: Not Found
Max. Turning Diameter - Lower: Not Found
Nose: Not Found
Max Machining Dia.: Not Found
Cutting Feed Rate: Not Found
Approximate Overall Dimensions: Not Found
Tailstock Quill Diameter: Not Found
Swing Over Bed: Not Found
C-Axis (Spindle Rotation): Not Found
Max. Work Piece Weight: Not Found
Max. Toll Diameter: Not Found
Shipping: Not Found
Control Model: Not Found
Table Horse Power: Not Found
Spindle Bore Diameter 2: Not Found
Xb - Axis Travel: Not Found
Upper Turret Tool Capacity: Not Found
Main Motor (20 Min): Not Found
Spindle Motor (HP): Not Found
Rapid Traverse Rates: Not Found
Axis Travel: Not Found
Boards Included: Not Found
Z Axis Travel Lower: Not Found
Collet: Not Found
Main Motor: Not Found
Rapid Traverse Rate - Z Axis: Not Found
Spindle Bore Diameter 1: Not Found
Rapid Traverse Rate Z: Not Found
Swing Over Compound Slide: Not Found
Max. Turning Diameter (Xa): Not Found
Travel X-Axis: Not Found
Spindle Taper: Not Found
Number Of Tool Turrets: Not Found
B - Axis Milling Spindle Taper: Not Found
Spindle Power 2: Not Found
Bar Feeder Length: Not Found
Sub Spindle Motor (HP): Not Found
Rapid Traverse Speed (Y-Axis): Not Found
Range Of Spindle Speed Main/Sub: Not Found
Rapid Traverse Speed (Z-Axis): Not Found
Axes: Not Found
Auto Tool Presetter: Not Found
Weight (Approx): Not Found
Chuck Bore Diameter: Not Found
Spindle Bearing Inner Diameter: Not Found
Rapid Traverse Ya & Yb Axis: Not Found
Z-Axis (Upper/Lower): Not Found
Max Swing Over Carriage: Not Found
Tool Presetter: Not Found
Max Bar Capacity Main Spindle: Not Found
Current Type: Not Found
Sub Spindle Speed: Not Found
Spindle Drive Motor: Not Found
Sub: Not Found
Rapid Traverse X-Axis: Not Found
Milling Spindle RPM: Not Found
Center: Not Found
X - Axis Upper/Lower Turret: Not Found
Main Motors: Not Found
Maximum Swing Over Saddle: Not Found
Spindle Nose Sub: Not Found
X-Axis (Lower Turret): Not Found
X - Axis Travel: Not Found
Insulation Class: Not Found
Tailstock Type: Not Found
Max Machining Length: Not Found
Turning Length: Not Found
RPM Range: Not Found
Features & Options (Varies By Configuration): Not Found
X1 Axis Travel: Not Found
Swin Over Bed: Not Found
Integration With Cad/Cam Systems: Not Found
Max Bar Capacity: Not Found
Spindle Bore: Not Found
Sub Spindle: Not Found
Distance Between Spindle Center Lines: Not Found
Spindle Speed Sub Spindle: Not Found
Z-Axis Travel (Upper Slide): Not Found
C2 - Axis Travel: Not Found
Rapid Traverse Rates Y1: Not Found
Cross-Slide Travel (X Axis) Upper Turret: Not Found
Diameter Above Transversing Slide: Not Found
Sccr Of Control Panel: Not Found
Spindle Bearings: Not Found
Tool Stations: Not Found
Location: Not Found
Bar Bore: Not Found
X2 Axis Travel: Not Found
Zb - Axis Travel: Not Found
Live Tool HP: Not Found
Live Milling Motor: Not Found
Type Of Nose: Not Found
X-Axis Travel: Not Found
Xa Turret: Not Found
Sub Spindle - Chuck Size: Not Found
Primary: Not Found
Dimensions: Not Found
Travels: Not Found
Overall Dimensions: Not Found
L X W: Not Found
C-Axis Rotation: Not Found
Range: Not Found
Sub Spindle Motor: Not Found
Number Of Gear Ranges: Not Found
Bed Length Of Lower Slideway: Not Found
Additional Features: Not Found
# Axis: Not Found
Travel (X): Not Found
Horsepower Head 1: Not Found
Head 2: Not Found
C – Axis Travel: Not Found
Main Spindle Speeds: Not Found
Rapid Traverse (X/Y/Z): Not Found
Za Axis Travel: Not Found
Rapid Traverse Z Axis: Not Found
Z-Axis: Not Found
No. Positions On Upper Turret: Not Found
Spindle Horsepower: Not Found
Sub Spindle Chuck: Not Found
Longitudinal Travel (Z Axis): Not Found
Second Spindle HP: Not Found
Rapid Traverse X: Not Found
Z Axis: Not Found
Center Diameter: Not Found
Machine Dimensions: Not Found
W - Axis Travel (Right Spindle): Not Found
Spdl Dia At Front Bearing: Not Found
Quill Travel: Not Found
Feedrate X: Not Found
Live Stations For Rotary Tools: Not Found
X-Axis (Cross Travel Of Upper Turret): Not Found
Motor Phase: Not Found
Tails Stock Quill Diameter: Not Found
Stroke: Not Found
Above The Bed: Not Found
Machine Weight: Not Found
Od Tool Shank Size: Not Found
Spindle Bore (First/Second): Not Found
Tailstock: Not Found
Number Of Axis: Not Found
Tooling: Not Found
Equipment Dimensions (Approx.): Not Found
Sub Spindle Speeds: Not Found
X1 / X2 Travel: Not Found
Live Tooling Speed Range: Not Found
Z - Axis Travel Z1: Not Found
Mfr: Not Found
Pickoff: Not Found
X - Axis Upper: Not Found
Spindle Bearing Diameter: Not Found
Spindle Bar Capacity (Main Spindle): Not Found
Number Of Tool Holders: Not Found
No. Stations On Turret: Not Found
Approximate Machine Dimensions: Not Found
Travels Xa & Xb: Not Found
C1-Axis (Indexing Positions Of Main Spindle): Not Found
Tailstock Quill Dia: Not Found
Controller: Not Found
Sub-Spindle Rapid Traverse: Not Found
C2-Axis (Indexing Positions Of Sub Spindle): Not Found
Approx Machine Weight: Not Found
Rapid Traverse (Z): Not Found
X Axis Rapid Traverse: Not Found
Z - Axis Lower: Not Found
Quill Stroke: Not Found
Sub-Spindle Torque: Not Found
Rapid Traverse Rate - X1: Not Found
Tailstock Travel: Not Found
B - Axis Travel Sub Spindle: Not Found
Second Spindle Bore: Not Found
Loader Maximum Size: Not Found
Rapid Traverse Rate X-Axis: Not Found
Main Bore Diameter: Not Found
Weight Of Components: Not Found
Max Work Length: Not Found
Tailstock Spindle Travel: Not Found
Bar Stock Capacity: Not Found
Rapid Traverse Rates Z: Not Found
Approx. Weight: Not Found
Steady Rest Size: Not Found
Main Spindle Nose: Not Found
Distance Between Spindle: Not Found
X - Axis Thrust: Not Found
Saddle: Not Found
Sub-Spindle Speeds: Not Found
Additional Equipment: Not Found
Milling Spindle HP: Not Found
Turret 1: Not Found
Main Spindle Motor: Not Found
Max Bar Capacity Sub Spindle: Not Found
X - Axis Travel Lower: Not Found
Hole Thru Spindle: Not Found
# Tool Positions: Not Found
Zb Travel: Not Found
Rapid Traverse Speeds X-Axis: Not Found
Milling Speed Upper / Lower: Not Found
Lower Turret Positions: Not Found
Max Turning Dia. Lower: Not Found
Axis Movement: Not Found
Live Tooling Motor: Not Found
Turret Type L: Not Found
Turret Configuration 2: Not Found
Construction: Not Found
Second: Not Found
Dimensions & Weight: Not Found
Approximate Dimensions: Not Found
Number Of Rotating Tools: Not Found
Engine Power: Not Found
Ways: Not Found
Sub-Spindle Travel: Not Found
Max. Bar Capacity: Not Found
Spindle HP Power: Not Found
Spindle Attachment Type: Not Found
Number Of Tool Stations: Not Found
Age (Circa): Not Found
X Rapid Feed Rate: Not Found
Spindle Motor: Not Found
Rapid Traverse Rates X: Not Found
Z: Not Found
Y2: Not Found
Y3: Not Found
Longitudinal Travel (Z Axis) Upper Turret: Not Found
Spindle Bore - Left & Right: Not Found
B-Axis Travel (Sub-Spindle): Not Found
Tool Shank Size: Not Found
X-Axis: Not Found
Tail Stock Taper: Not Found
Indexing: Not Found
C - Axis Travel 1: Not Found
2: Not Found
Rotation Speed: Not Found
Max Diameter Bar Capacity: Not Found
Rotary Tool Positions: Not Found
Number Of Spindles: Not Found
Arrival Date: Not Found
Electrical Power: Not Found
Frequency: Not Found
X-Axis Travel (Lower Slide): Not Found.

Do you have a Okuma crown 769 l1420 cnc lathe to sell?

We are actively seeking a 1998 Crown 769 L1420 CNC Lathe. This reliable machine features a robust design and is well-suited for various turning applications. With a swing over bed of 18.90 inches and a maximum turning diameter of 14.17 inches, it offers versatility and efficiency for your machining needs. The X-axis travel of 9.05 inches and Z-axis travel of 26.38 inches provide ample movement for intricate designs and complex parts. Its spindle bore diameter of 3.15 inches accommodates a range of tooling, allowing for greater flexibility in your operations.

The Crown 769 L1420 is equipped with a 12-inch chuck and a chip conveyor, ensuring smooth operation and easy maintenance. Additionally, the tailstock enhances stability during machining, making it an excellent choice for precision work. If you're looking to sell your used CNC machines, including the Crown 769 L1420, we offer competitive prices and a straightforward selling process. Our team at Superior Machine Tools is dedicated to providing you with a seamless experience, ensuring that you get the best value for your equipment. Don't let your unused machines take up space; turn them into cash today!

Contact us to find out how we can help you sell your 1998 Crown 769 L1420 CNC Lathe quickly and efficiently. Let us assist you in maximizing your investment and clearing out your workspace. We are here to help you every step of the way.