Mazak multiplex 430 twin spindle cnc turning center (1999)

Direct procurement1999 Model

Sell your Mazak multiplex 430 twin spindle cnc turning center today.

MTE does not act as a broker, nor do we buy on consignment. We buy machinery and assets outright and arrange the pickup.

Make: Mazak
Model: multiplex 430 twin spindle cnc turning center
Year: 1999
Category: CNC Turning Centers
Condition: Used / Surplus

Jason PuuriOwner, Superior Machine & Tool, Inc.Message From MTE Owner

Jason sets final pricing on the machines MTE buys.

Mazak multiplex 430 twin spindle cnc turning center Specifications

Chuck Size: 6"
W Axis: Not Found
Max Bar Capacity: Not Found
Spindle Horsepower (Cont./30 Min.): Not Found
X1-Axis Travel: Not Found
Spindle Power: Not Found
Capacity: Not Found
Swing Over Carriage: Not Found
X-Axis (Cross Travel): Not Found
Z-Axis (Longitudinal Travel): Not Found
Y-Axis: Not Found
Tailstock Quill Taper: Not Found
Minimum Spindle Indexing Increment: Not Found
Tailstock Quill Travel: Not Found
Second Spindle Horsepower: Not Found
Swing Over Bed: Not Found
Spindle Speeds 1, 2: Not Found
Rapid Traverse Y Axis: Not Found
Design: Not Found
X-Axis Travel: Not Found
Spindle Nose, Main: Not Found
Rapid Traverse X-Axis: Not Found
Tailstock Body Travel: Not Found
C - Axis Travel 1, 2: Not Found
Spindle Speed (Mill): Not Found
Approximate Machine Height: Not Found
Standard Cutting Diameter: Not Found
Main Drive Motor: Not Found
Sub Spindle Motor: Not Found
X-Axis Rapid Traverse Rate: Not Found
Tooling: Not Found
Turret Positions: Not Found
W Axis Travel (Sub Spindle): Not Found
Distance Between Spindle Faces (Max.): Not Found
Machining Length: Not Found
Chuck Type: Not Found
Maximum Tool Weight: Not Found
Maximum Machining Diameter: Not Found
Max. Cutting Diameter: Not Found
Spindle Bore Diameter: Not Found
Turret Indexing Time: Not Found
Included Tooling: Not Found
Spindle Nose, Sub: Not Found
Rapid Traverse Z Axis: Not Found
Electrial: Not Found
Spindle Indexing (C-Axis): Not Found
Rapid Traverse Rates: Not Found
Center Distance: Not Found
Additional Equipment: Not Found
Main Spindle Bore Diameter: Not Found
Machining Spindle Horsepower: Not Found
Max Work Transfer Diameter: Not Found
X - Axis Travel: Not Found
Y-Axis Travel: Not Found
Spindle Motor Power: Not Found
Control System: Not Found
Maximum Tool Diameter: Not Found
Spindle HP: Not Found
Rapid Traverse: Not Found
Tailstock Control: Not Found
Bed Length: Not Found
Spindle Speed: Not Found
Main Spindle Power: Not Found
Max Bar Capacity Sub Spindle: Not Found
Tool Presetters: Not Found
Maximum Cutting Length Chuckwork: Not Found
Mfr: Not Found
Max Swing Over Bed: Not Found
B-Axis Travel: Not Found
Chuck Size 1, 2: Not Found
Main Circuit: Not Found
High Pressure Coolant System: Not Found
Rotary Tool Motor: Not Found
Rapid Traverse Rates X-Axis: Not Found
Hydraulic Chuck (Sub): Not Found
Maximum Drill: Not Found
Automatic Tool Eye: Not Found
Tool: Not Found
Spindle Liners: Not Found
Tailstock: Not Found
Spindle Drive: Not Found
Max. Spindle Speed: Not Found
Live Tool Holders: Not Found
Type Of Turret: Not Found
Tool Size: Not Found
Approximate Machine Dimensions: Not Found
Rapid Traverse Rate X: Not Found
Z1-Axis: Not Found
X - Axis Travel 1, 2: Not Found
Tool Size Milling: Not Found
Distance Between Centers: Not Found
Spindle Speed Range: Not Found
Od Turning Tool Size: Not Found
No. Positions On Turret: Not Found
Max. Swing: Not Found
Tool Size (Boring Bar Max. Dia.): Not Found
Max Turning Length: Not Found
Tailstock Quill Dia.: Not Found
Spindle Speeds Range: Not Found
Gantry: Not Found
Rapid Traverse X: Not Found
High Power Coolant: Not Found
Approximate Machine Weight: Not Found
Rotary Tools Speed Range (Live Tools): Not Found
Load Stations: Not Found
Z1-Axis Travel: Not Found
Z-Axis (L): Not Found
Total Number Of Tools: Not Found
Rapid Traverse B Axis: Not Found
Main Spindle Horsepower: Not Found
Tapping: Not Found
Chuck Diameter (L&R): Not Found
Z2 Axis Lower: Not Found
Second Spindle Maximum RPM: Not Found
Main & Second Spindle Motor: Not Found
Rapid Traverse Z-Axis: Not Found
Turret Rotary Tool Horse Power 1: Not Found
Collet Chuck: Not Found
Turret Index Time: Not Found
Rapid Traverse C - Axis: Not Found
Spindle Speed, Main: Not Found
Operating System: Not Found
Rapid Traverse Z - Axis: Not Found
Main Spindle Bore: Not Found
Maximum Tool Length: Not Found
Shaft Size: Not Found
Weight: Not Found
Sub Spindle Rapid Traverse Rate: Not Found
Rapid Traverse (Y-Axis): Not Found
Main Spindle Max. Bar Work: Not Found
Rotary Tool Spindle Horsepower/(10 Min): Not Found
Tool Storage Capacity: Not Found
Bar Work Capacity: Not Found
Horsepower Head 1, Head 2: Not Found
X-Axis Travel/Rapid Reverse: Not Found
Rapid Traverse Rate - X1: Not Found
Max Turning Diameter: Not Found
Chuck Size (2Nd Spindle): Not Found
Max Machining Length (Chuck Work): Not Found
Z-Axis Stroke: Not Found
Maximum Bar Work: Not Found
Number Of Turret Positions: Not Found
Z-Axis Travel/Rapid Reverse: Not Found
Turret Number Of Tools: Not Found
Second Spindle Maximum Bar Work: Not Found
Turning Speed: Not Found
Signal Tower Lights: Not Found
Diameter: Not Found
Spindle Bore Main: Not Found
X2-Axis (Lower): Not Found
Motor Output (5/10 Min. Rating): Not Found
Type: Not Found
Swing: Not Found
Bar: Not Found
Live Tooling: Not Found
Spindle Torque (25% Ed): Not Found
Turret Stations: Not Found
Turret Travels (X,Z): Not Found
Live Tool Power: Not Found
Number Of Spindles: Not Found
Z1 Axis Travel: Not Found
X1-Axis: Not Found
Second Spindle Bore: Not Found
B Axis Travel: Not Found
Turret Rotary Tool Spindle Speed 1: Not Found
Chuck Size (Main): Not Found
Tailstock Travel: Not Found
Rapid Traverse (C-Axis): Not Found
Turret Configuration: Not Found
Max Machining Length (Shaft Work): Not Found
Y1-Axis: Not Found
Sub Spindle Bore: Not Found
With Adjacent Pocket Empty: Not Found
Turning Diameter: Not Found
Shaft Diameter: Not Found
Max Weight Capacity: Not Found
Main Spindle Indexing: Not Found
Distance Between Spindle Faces: Not Found
Turret Type: Not Found
Maximum Turning Length: Not Found
Spindle Speed, Sub: Not Found
C - Axis: Not Found
Z-Axis (R): Not Found
Number Of Axes: Not Found
Load / Unload Tray: Not Found
Maximum Cutting Length For Chuckwork: Not Found
Distance Between Center: Not Found
Barfeed: Not Found
Travel: Not Found
Rapid Traverse Rates Z1, Z2: Not Found
Maximum Swing Over Cross Slide: Not Found
Second Spindle Nose: Not Found
Maximum Bar Diameter: Not Found
Mill Spindle Power: Not Found
Z-Axis Travel (L): Not Found
Horsepower: Not Found
Machine Dimensions: Not Found
# Axis: Not Found
Rear Chuck Prep: Not Found
Z-Axis Rapid Feedrate: Not Found
Parts Conveyor: Not Found
Travels: Not Found
Maximum Machining Length: Not Found
Features: Not Found
Maximum Machining Length For Shaftwork: Not Found
X Rapid Traverse Rate: Not Found
Machine Height: Not Found
Turret Air Blast: Not Found
Chuck Size (Subspindle): Not Found
Second Chuck Size: Not Found
Spindle Horsepower (30 Min.): Not Found
W - Axis Travel Sub Spindle: Not Found
Coolant System: Not Found
Tool Type: Not Found
Z-Axis: Not Found
Spindle Horsepower 1: Not Found
Programmable Tailstock: Not Found
C-Axis: Not Found
Max RPM: Not Found
Spindle Motor: Not Found
Spindle Bore Diameter 1, 2: Not Found
Gantry Load / Unloading: Not Found
Center To Center: Not Found
Spindle Nose 1: Not Found
Power: Not Found
Control Circuit: Not Found
Power Source: Not Found
Bar Feed: Not Found
Maximum Machining Diameter (Lower): Not Found
Machine Weight: Not Found
Tailstock Quill Stroke: Not Found
Rated Capacity: Not Found
Max Cutting / Turning Diameter: Not Found
Spindle: Not Found
Power Requirement: Not Found
Motor Output (Half-Hourly Rating): Not Found
Main Spindle Chuck Size: Not Found
Maximum Swing Over Lower Turret: Not Found
Feedrate: Not Found
Mill Spindle Maximum RPM: Not Found
Max: Not Found

Do you have a Mazak multiplex 430 twin spindle cnc turning center to sell?

We are actively seeking a 1999 Mazak Multiplex 430 Twin Spindle CNC Turning Center. This exceptional machine is well-known for its twin spindle capabilities, allowing for increased productivity and efficiency in machining operations. With a maximum swing of 22 inches and a swing over bed of 15.35 inches, it's designed to handle a variety of workpieces with ease. The machining length of 20 inches for the primary spindle and an extended 46.45 inches for the secondary spindle provides versatility for various applications, while the distance between centers of 46.45 inches allows for larger parts to be machined effectively.

The X-axis travel of 12.2 inches and Z-axis travel of 23.8 inches ensure that this CNC turning center can maneuver precisely, meeting the demands of complex machining tasks. Equipped with 10-inch chucks, it is suitable for holding a wide range of materials securely during operation. The Mazak Multiplex 430 is also recognized for its reliability and performance, making it a valuable addition to any machine shop looking to enhance their turning capabilities. At Superior Machine Tools, we understand the importance of upgrading your equipment while also maximizing your investment.

If you have a 1999 Mazak Multiplex 430 Twin Spindle CNC Turning Center that you are looking to sell, we are here to offer you a competitive price and a hassle-free selling experience. Don't let your unused machinery take up valuable space; reach out to us today to get a quote and see how easy it is to sell your used CNC machines.