Doosan Puma TT 2500 SY

What the maker publishes about the current Doosan Puma TT 2500 SY

The PUMA TT2500SY is a DN Solutions turning center from the PUMA TT family with left and right spindles, an upper and a lower turret, and a Y-axis. Parts up to 390 mm in diameter and 350 mm long fit the work zone. The chuck size is 10 inch. Axis strokes measure 255 mm in X, 120 mm in Y and 800 mm in Z. X moves at a rapid 20 m/min, while Z rapids at 24 m/min. The main spindle delivers 26 kW and 433 N·m, with a top speed of 3500 r/min. A built-in second spindle on the right carries the same 3500 r/min and 26 kW figures. Both turrets and both spindles move independently. The turret table shows 12 tool stations. Driven tools spin at up to 5000 r/min. Roller LM guideways support the slides. Each spindle has an independent parts catcher and unloader. It is 4050 mm long and weighs 12700 kg.

Source: DN Solutions, September 27, 2026.

What the Doosan Puma TT 2500 SY is used for

DN Solutions aims the PUMA TT series, the TT2500SY included, at long runs of automotive and medical parts. Its left and right spindles and its upper and lower turrets run independently, so two parts are cut at the same time, and each spindle has its own parts catcher and unloader.

Source: DN Solutions, October 14, 2026.

Doosan Puma TT 2500 SY specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 14, 2026.

What fits a Doosan Puma TT 2500 SY

Each of these follows from a published specification above, which is named beside it.

Doosan Puma TT 2500 SY equipment and options

Options on the 8 Doosan Puma TT 2500 SY units we tracked

• Chip conveyor 2 of 8
• Sub-spindle 2 of 8

What to check on a Doosan Puma TT 2500 SY

• Spindle. The manufacturer gives a spindle speed of 3500 r/min. Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 26 kW (35 hp) of spindle power and 433 N·m (319 ft-lb) of spindle torque. Take a heavy cut and watch the load meter.
• Axes and way covers. The manufacturer gives X 255 mm (10 inch), Y 120 mm (5 inch) and Z 800 mm (31 inch) of travel. Run each axis end to end and check the way covers.
• Rapids and ballscrews. The manufacturer gives a rapid traverse of X-Axis Rapid Traverse 20 m/min (787 ipm), Z-Axis Rapid Traverse 24 m/min (945 ipm). Measure the backlash on each axis.
• Turret. The manufacturer gives the turret stations as 12. Index every station and time a full turn.
• Chuck and bar. The manufacturer gives a chuck size of 10 inch. Check the jaws and the grip pressure.
• Bed and ways. The manufacturer gives a max turning diameter of 390 mm (15 inch) and a max turning length of 350 mm (14 inch). Check the ways for wear near the chuck.
• Rotary tools. The manufacturer gives the rotary tooling as 5000 r/min. Check that the rotary tools still drive under load.
• Second spindle. The manufacturer gives a sub spindle: max. spindle speed of 3500 r/min. Check that it synchronizes on a part transfer.
• Rigging and floor. The manufacturer gives a machine weight of 12700 kg (27999 lb), a machine length of 4050 mm (159 inch), a machine width of 2210 mm (87 inch) and a machine height of 2480 mm (98 inch). Confirm the rigging route and the floor will take that.

Doosan Puma TT 2500 SY listing history

Where it was listed

Filed under CNC Multi-Tasking Machines (Mill-Turn / Turn-Mill) (5), CNC Lathes (2), CNC Horizontal Machining Centers (HMC) (1) and CNC Turning Centers (1).

Model years seen

2015, 2011, 2010 ×2, 2008 ×3, 2006, 2004 ×3.

What Doosan Puma TT 2500 SY listings agree on

What affects the value of a used Doosan Puma TT 2500 SY

• Options. The units we tracked split on spindle bore (3.5 in on 2 machines, 76 mm on 2 machines).
• Build year. The units we tracked were built from 2004 to 2015, across 6 model years.
• Against the published figures. The manufacturer gives max spindle speed 3500 r/min, spindle motor power 26 kW (35 hp), turret stations 12 and chuck size 10 inch.

Looking for a Doosan Puma TT 2500 SY for sale?

We have tracked 11 Doosan Puma TT 2500 SY listings on 3 marketplaces (exapro.com, quickmachinerysales.com and surplusrecord.com), model years 2004 to 2015. We buy Doosan Puma TT 2500 SY machines and do not sell them.

2015 · 2011 · 2010 · 2008 · 2008 · 2008 · 2006 · 2004

Every Doosan Puma TT 2500 SY we have tracked

The Doosan Puma TT 2500 SY among lathes and turning centers

Browse all CNC Multi-Tasking Machines (Mill-Turn / Turn-Mill), or see every Doosan machine we track.

Models related to the Doosan Puma TT 2500 SY

1. Doosan PUMA TT1800SY: manufacturer specification page, fetched October 14, 2026.
2. Doosan Puma TT 2500 SY: manufacturer specification page, fetched October 14, 2026.
3. Doosan PUMA TT-2100SYY: manufacturer specification page, fetched October 27, 2026.