CNC Turning Centers

Mazak Multiplex (1998)

Call 800-822-9524

Sell your Mazak Multiplex 1998 today.

MakeMazak

ModelMultiplex

Year1998

CategoryCNC Turning Centers

ConditionUsed

Mazak Multiplex Specifications

Other	Chuck Size
Other	W Axis
Other	Max Bar Capacity
Other	Spindle Horsepower (Cont./30 Min.)
Other	X1-Axis Travel
Other	Spindle Power
Other	Capacity
Other	Swing Over Carriage
Other	X-Axis (Cross Travel)
Other	Z-Axis (Longitudinal Travel)
Other	Y-Axis
Other	Tailstock Quill Taper
Other	Minimum Spindle Indexing Increment
Other	Tailstock Quill Travel
Other	Second Spindle Horsepower
Other	Swing Over Bed
Other	Spindle Speeds 1, 2
Other	Rapid Traverse Y Axis
Other	Design
Other	X-Axis Travel
Other	Spindle Nose
Other	Main
Other	Rapid Traverse X-Axis
Other	Tailstock Body Travel
Other	C - Axis Travel 1, 2
Other	Spindle Speed (Mill)
Other	Approximate Machine Height
Other	Standard Cutting Diameter
Other	Main Drive Motor
Other	Sub Spindle Motor
Other	X-Axis Rapid Traverse Rate
Other	Tooling
Other	Turret Positions
Other	W Axis Travel (Sub Spindle)
Other	Distance Between Spindle Faces (Max.)
Other	Machining Length
Other	Chuck Type
Other	Maximum Tool Weight
Other	Maximum Machining Diameter
Other	Max. Cutting Diameter
Other	Spindle Bore Diameter
Other	Turret Indexing Time
Other	Included Tooling
Other	Spindle Nose, Sub
Other	Rapid Traverse Z Axis
Other	Electrial
Other	Spindle Indexing (C-Axis)
Other	Rapid Traverse Rates
Other	Center Distance
Other	Additional Equipment
Other	Main Spindle Bore Diameter
Other	Machining Spindle Horsepower
Other	Max Work Transfer Diameter
Other	X - Axis Travel
Other	Y-Axis Travel
Other	Spindle Motor Power
Other	Control System
Other	Maximum Tool Diameter
Other	Spindle HP
Other	Rapid Traverse
Other	Tailstock Control
Other	Bed Length
Other	Spindle Speed
Other	Main Spindle Power
Other	Max Bar Capacity Sub Spindle
Other	Tool Presetters
Other	Maximum Cutting Length Chuckwork
Other	Mfr
Other	Max Swing Over Bed
Other	B-Axis Travel
Other	Chuck Size 1, 2
Other	Main Circuit
Other	High Pressure Coolant System
Other	Rotary Tool Motor
Other	Rapid Traverse Rates X-Axis
Other	Hydraulic Chuck (Sub)
Other	Maximum Drill
Other	Automatic Tool Eye
Other	Tool
Other	Spindle Liners
Other	Tailstock
Other	Spindle Drive
Other	Max. Spindle Speed
Other	Live Tool Holders
Other	Type Of Turret
Other	Tool Size
Other	Approximate Machine Dimensions
Other	Rapid Traverse Rate X , Z
Other	Sub Spindle Speed
Other	Milling Drill Size
Other	Sub-Spindle
Other	Z1-Axis
Other	X - Axis Travel 1, 2
Other	Tool Size Milling
Other	Distance Between Centers
Other	Spindle Speed Range
Other	Od Turning Tool Size
Other	No. Positions On Turret
Other	Max. Swing
Other	Tool Size (Boring Bar Max. Dia.)
Other	Max Turning Length
Other	Tailstock Quill Dia.
Other	Spindle Speeds Range
Other	Gantry
Other	Rapid Traverse X, Z
Other	High Power Coolant
Other	Approximate Machine Weight
Other	Rotary Tools Speed Range (Live Tools)
Other	Load Stations
Other	Z1-Axis Travel
Other	Z-Axis (L)
Other	Total Number Of Tools
Other	Rapid Traverse B Axis
Other	Main Spindle Horsepower
Other	Tapping
Other	Chuck Diameter (L&R)
Other	Z2 Axis Lower
Other	Second Spindle Maximum RPM
Other	Main & Second Spindle Motor
Other	Rapid Traverse Z-Axis
Other	Turret Rotary Tool Horse Power 1
Other	Collet Chuck
Other	Turret Index Time
Other	Rapid Traverse C - Axis
Other	Spindle Speed, Main
Other	Operating System
Other	Rapid Traverse Z - Axis
Other	Main Spindle Bore
Other	Maximum Tool Length
Other	Shaft Size
Other	Weight
Other	Sub Spindle Rapid Traverse Rate
Other	Rapid Traverse (Y-Axis)
Other	Main Spindle Max. Bar Work
Other	Rotary Tool Spindle Horsepower/(10 Min)
Other	Tool Storage Capacity
Other	Bar Work Capacity
Other	Horsepower Head 1, Head 2
Other	X-Axis Travel/Rapid Reverse
Other	Rapid Traverse Rate - X1
Other	Max Turning Diameter
Other	Chuck Size (2Nd Spindle)
Other	Max Machining Length (Chuck Work)
Other	Z-Axis Stroke
Other	Maximum Bar Work
Other	Number Of Turret Positions
Other	Z-Axis Travel/Rapid Reverse
Other	Turret Number Of Tools
Other	Second Spindle Maximum Bar Work
Other	Turning Speed
Other	Signal Tower Lights
Other	Diameter
Other	Spindle Bore Main
Other	X2-Axis (Lower)
Other	Motor Output (5/10 Min. Rating)
Other	Type
Other	Swing
Other	Bar
Other	Live Tooling
Other	Spindle Torque (25% Ed)
Other	Turret Stations
Other	Turret Travels (X,Z)
Other	Live Tool Power
Other	Number Of Spindles
Other	Z1 Axis Travel
Other	X1-Axis
Other	Second Spindle Bore
Other	B Axis Travel
Other	Turret Rotary Tool Spindle Speed 1
Other	Chuck Size (Main)
Other	Tailstock Travel
Other	Rapid Traverse (C-Axis)
Other	Turret Configuration
Other	Max Machining Length (Shaft Work)
Other	Y1-Axis
Other	Sub Spindle Bore
Other	With Adjacent Pocket Empty
Other	Turning Diameter
Other	Shaft Diameter
Other	Max Weight Capacity
Other	Main Spindle Indexing
Other	Distance Between Spindle Faces
Other	Turret Type
Other	Maximum Turning Length
Other	Spindle Speed, Sub
Other	C - Axis
Other	Z-Axis (R)
Other	Number Of Axes
Other	Load / Unload Tray
Other	Maximum Cutting Length For Chuckwork
Other	Distance Between Center
Other	Barfeed
Other	Travel
Other	Rapid Traverse Rates Z1, Z2
Other	Maximum Swing Over Cross Slide
Other	Second Spindle Nose
Other	Maximum Bar Diameter
Other	Mill Spindle Power
Other	Z-Axis Travel (L)
Other	Horsepower
Other	Machine Dimensions
Other	# Axis
Other	Rear Chuck Prep
Other	Z-Axis Rapid Feedrate
Other	Parts Conveyor
Other	Travels
Other	Maximum Machining Length
Other	Features
Other	Maximum Machining Length For Shaftwork
Other	X Rapid Traverse Rate
Other	Machine Height
Other	Turret Air Blast
Other	Chuck Size (Subspindle)
Other	Second Chuck Size
Other	Spindle Horsepower (30 Min.)
Other	W - Axis Travel Sub Spindle
Other	Coolant System
Other	Tool Type
Other	Z-Axis
Other	Spindle Horsepower 1
Other	Programmable Tailstock
Other	C-Axis
Other	Max RPM
Other	Spindle Motor
Other	Spindle Bore Diameter 1, 2
Other	Gantry Load / Unloading
Other	Center To Center
Other	Spindle Nose 1
Other	Power
Other	Control Circuit
Other	Power Source
Other	Bar Feed
Other	Maximum Machining Diameter (Lower)
Other	Machine Weight
Other	Tailstock Quill Stroke
Other	Rated Capacity
Other	Max Cutting / Turning Diameter
Other	Spindle
Other	Power Requirement
Other	Motor Output (Half-Hourly Rating)
Other	Main Spindle Chuck Size
Other	Maximum Swing Over Lower Turret
Other	Feedrate
Other	Mill Spindle Maximum RPM
Other	Max.

Do you have a Mazak Multiplex to sell?

We are actively seeking a 1998 Mazak Multiplex 630 Dual Spindle Dual Turret CNC Turning Center. This sophisticated machine is renowned for its dual spindle and dual turret configuration, making it an exceptional choice for precision machining. Equipped with the Mazatrol T-Plus CNC Control, this turning center allows for enhanced programming flexibility and operational efficiency. The twin spindle design ensures efficient processing of workpieces, while the two 12-station turrets, all capable of live milling, add to the machine's versatility and productivity.

The Forkhardt collet chuck on the main spindle, along with the 3-jaw chuck on the sub-spindle, provides reliable gripping and stability during operations. This model is perfect for shops looking to increase their production capabilities and streamline their workflow. If you have a Mazak Multiplex 630 that you are considering selling, we are interested in purchasing it. At Superior Machine Tools, we understand the value of high-quality CNC machines and are committed to offering competitive prices.

Our team is ready to help you transition your equipment with ease, ensuring a smooth sale process. Don't miss the opportunity to get top dollar for your machine. Contact us today to discuss your 1998 Mazak Multiplex 630 Dual Spindle Dual Turret CNC Turning Center and see how we can assist you in maximizing your investment.

Frequently Asked Questions

What types of machinery and equipment do you purchase?

MTE buys a wide range of used and surplus machinery, including CNC machines, metalworking and fabrication equipment, industrial robots, inspection and testing systems, and material handling assets from industries such as metals manufacturing, oil and gas, automotive, and mining.

How does MTE assess the value of my surplus equipment?

Our team conducts a thorough review using current market data, equipment specifications, age, and condition. We provide fair market valuations given your specific situation to ensure you receive maximum value for your assets.

What is the process for selling my excess machinery to MTE?

We make it simple: contact us with asset details, and our specialists will review and coordinate an inspection if needed. After finalizing terms, we handle all logistics, removal, and payment for a smooth and efficient transaction.

How quickly can MTE complete the purchase and removal of my surplus equipment?

MTE prioritizes safe and efficient equipment removal, adhering to your company's specific requirements and timeframes. We coordinate all logistics to ensure the process is carried out safely and efficiently, minimizing risks and protecting both personnel and equipment.

What documentation is required to sell my used machinery?

We typically request detailed equipment information, such as make, model, year, and maintenance records, along with proof of ownership. Our team will guide you through all necessary paperwork to ensure a secure and transparent transaction.

Where is MTE located, and do you offer services outside Michigan?

While MTE is proudly based in Michigan, our services extend across the entire United States and internationally. No matter where your surplus machinery or equipment is located, our team has the experience and logistics capabilities to manage evaluations, purchases, and removals efficiently.

Is MTE an equipment broker?

No. Our business model is based on purchasing equipment outright — MTE does not act as a broker nor do we buy on consignment. We buy machinery and assets upfront, providing immediate payment and a straightforward transaction.