Used Amada Machines We Buy

Machine Tool Exchange buys used Amada machines straight from the shops that own them: RG, HFE and FBD press brakes, PEGA, VIPROS and EMK turret punches, ENSIS and FO lasers, shears and HA band saws. Selling an Amada press brake, punch or laser comes down to a few details a buyer checks first, and this page sets them out, along with where Amada builds its machines and what changes an offer.

  • 24–48hQuote turnaround
  • Since 2012Buying machines
  • DirectNot a broker
A manufacturing plant floor with machinery, seen from above
Quote in 24–48 hrsFrom the buyer, not a broker
Buying since 2012Outright purchases only

How Selling Your Amada Works

  1. Tell us what you have

    Send the model and serial from the data plate, an EM2510NT punch or an RG-80 brake for example, with the year, the control on the screen and the condition. Laser hours or brake tonnage help, but they are not required to start.

  2. Get a quote within 24-48 hours

    We price your Amada against what the market is paying and come back with an offer, usually within 24 to 48 hours, with no obligation to accept.

  3. We can arrange rigging, freight and the pickup

    Accept the offer and we can arrange the rigging, crating, freight and pickup, whether it is one HA band saw or a punch, a brake and a laser coming out together.

Who Makes Amada Machines

Amada machines are built by AMADA CO., LTD. of Japan. Its founder, Isamu Amada, started with a one-man machine repair shop, Amada Works, run on a lathe salvaged from a burnt-out munitions factory after the war. Amada dates its founding to September 10, 1946, in Toshima-ku, Tokyo, and the limited partnership AMADA Manufactures followed in 1948. The earliest machines on Amada's own timeline are saws, a vertical band saw in 1955 and horizontal cut-off band saws from 1956; press brakes came in 1965 and the NC turret punch press in 1971.

The company took the name AMADA CO., LTD. in 1964 and moved its headquarters in 1969 to Isehara, in Kanagawa Prefecture, where it still is. Amada reports 9,872 employees on a consolidated basis as of March 2026 and says the group operates in over 100 countries across six core businesses: sheet metal processing, welding, cutting, grinding machines, stamping presses and printed circuit board processing equipment.

Where Your Amada Was Built

Amada calls its Fujinomiya and Toki works the mother factories for its sheet metal machines: major modules are built there and sent to the group's production bases abroad, and laser oscillators and core modules come from its core plants in Japan. Amada counts 24 manufacturing bases in all, and in 2007 it opened a dedicated laser factory at Fujinomiya.

In the US, Amada set up a technology development company in Seattle in 1971, and Amada America has been in California since 1973, with headquarters in Buena Park. U.S. Sonoike, now part of Amada America, began producing NC turret punches in California from knock-down kits in 1981. Amada opened its Brea, California, plant in 2013, a 180,000 sq. ft. facility building lasers and automation, and its Carolina Manufacturing Center in High Point, North Carolina, on December 6, 2019, where its HRB hybrid-drive press brakes are made. A used Amada in a US shop may have come from any of them, or from Japan.

When Amada Introduced Its Main Lines

Amada's own company history dates these launches, in order. Its year-by-year pages do not date every family; the HFE, HG and FBD brakes and the FO and LC lasers, for example, have no entry:

YearLine or machine
1955Vertical band saw
1956Horizontal band saws
1965RG press brakes
1971LYLA-555
1980LASMAC-644
1987APELIO series
1988BM-100
1989VIPROS series
1997NT machines
2002EM series
2010FOL-3015AJ
2014ENSIS series
2019VENTIS-AJ

Amada's current US catalog, as of this writing, lists ENSIS, VENTIS, REGIUS, ORSUS and BREVIS fiber lasers; EM, EMK and AE turret punches; EML, ACIES and LC combination machines; and HRB, HG and EGB press brakes.

Dating a Used Amada by Its Drive, Laser and Control

Amada's own timeline lets a used machine be placed roughly by what drives it. On turret punches, the VIPROS series of 1989 was a hydraulic machine; Amada's first electric servo turret punch, the EM series, came in 2002, and its current US catalog lists the AE NT as a servo-drive punch. On lasers, Amada built Japan's first CO2 laser machine in 1980 and did not have a fiber oscillator of its own until 2010, when it launched the FOL-3015AJ; the ENSIS followed in 2014, and the ENSIS AJ is listed today from 3 kW to 15 kW. On controls, Amada announced its NT machines, networked through the AMNC/PC control, in 1997, so an NT on the plate of an EM2510NT or FBD8025NT points to that family or later.

Those three things, punch drive, laser source and control generation, are what we ask about on an Amada before tonnage, wattage or hours, because they place the machine in Amada's own lineage before condition is weighed.

Amada Model Strings We Quote

An Amada quote starts from the full model string, and the strings run wide. On the laser side that means ENSIS 3015 AJ fiber machines, an FOM2 3015 NT or an older LC2415 Alpha III. Turret punches carry strings such as EMK3510NT, AE-255NT and ARIES 255NT; press brakes, FBD8025E, FBD8025NT or an EGB-4010e electric brake; saws, an HA-400 or an HDA-250. An APELIO combination machine is quoted the same way. Each is scoped on its own data plate.

Amada's Service Network, or Selling Outright

Amada America says it has the largest and most responsive network of service personnel in the US machine tool industry. It sells maintenance plans, including a laser plan, and takes parts and tooling orders through its own order desks. Amada set up the AMADA SCHOOL in Japan in 1978 to train operators. That support is the right call for an Amada you are keeping in production. For one you are replacing, we buy it outright, and a maintenance-plan record or recent service report is worth sending with the model and serial.

Selling a Used Amada Press Brake: What a Buyer Checks

The pages that rank for a used Amada press brake are written for the buyer, and they list the same checks: tonnage and bending length, the control and how programmable it is, the back gauge, the tooling and clamping, and the hydraulic and mechanical condition. Answer those before a buyer asks. Give the full model string, every letter and digit after RG, HFE, FBD or HDS included. Photograph the control screen with the machine powered up, because control generation separates two brakes of the same frame faster than anything else. Count the back-gauge axes and say whether crowning is fitted. List the punches, dies and holders that go with it; a full Amada tooling set adds to the scope, a bare ram takes from it. Say whether the ram leaks, holds position under load and still bends to angle along the full length. If the brake ran one job for years, say what it was. That is everything we need to quote.

Amada Model Families We Buy

On the brake side we buy RG, HFE, FBD, HFB, HG and HDS machines and the newer electric and hybrid brakes. Turret punching runs PEGA and VIPROS, then EMK, ARIES, AE and EM. Lasers run ENSIS, FO, LCG, QUATTRO and FOM2, with EML for punch-laser combination work. Band saws run HA and HFA, and we take M-series shears as well. Give us the complete designation, an RG-80, an HA-250W, an EM2510NT or an ENSIS 3015 AJ, since a family name on its own does not place a machine.

What Moves the Offer on a Used Amada

Control generation is the first thing we ask about. A machine on a current Amada AMNC screen and one on an older or Delem-class control are two different conversations before anything else, and a 1980s RG and a current ENSIS sit at opposite ends of that range. After that, the drivers get specific to the machine. On a laser it is source type, wattage, and run hours. On a press brake it is tonnage, bed length, and how many back-gauge axes are under control. On a turret punch it is tonnage, station count, hit rate, and servo-electric versus hydraulic drive. On a shear it is cutting length, maximum thickness, and the CNC back gauge. Included tooling, dies, and attached automation count, and so does whether the machine is producing accurate parts today. Jason Puuri scopes each one himself rather than running a formula.

What to Have Ready Before You Call

Start with the model, serial number, year, and an honest read on condition. The model number does real work here: the full string is what separates an RG-50 from an RG-100, or an EM2510NT from an AE-2510NT, before anyone talks about a number. Then add what fits the machine. Laser: source type, wattage, run hours. Press brake: tonnage, bed length, back-gauge axes. Turret punch: tonnage, station count, hit rate. Shear: cutting length and maximum thickness. Control type on anything, current Amada AMNC or older. Photos help and are not required, and the three that answer the most questions are the control screen, the ram and back gauge, and the laser head or resonator. Clearing more than one machine? A plain list of models and quantities is enough to start, and we will sort the rest out on the call.

Why Fab Shops Sell an Amada

Six situations account for most of the Amada machines that come off a floor. The biggest is a cutting upgrade, CO2 to fiber or a step up in wattage, which sends older CO2 machines such as the FO and FOM2 out the door as a fiber ENSIS comes in. Second is a move into robotic bending or load-tower automation, which frees up the manual brakes and sometimes the older ASR and LST storage and loading units with them. Third and fourth are shop downsizing or owner retirement, and facility consolidation or relocation, where duplicate machines go surplus in one move. Fifth is capacity rebalancing after a contract winds down. Sixth is an estate sale or a business liquidation. In every case, MTE buys the displaced machine outright, so it is gone before the new install lands.

Selling to MTE Instead of Brokering or Auctioning It

MTE is the buyer, not a broker, a marketplace, a consignment shop, or an auction. The offer comes directly from the buyer. We buy in any condition, running, idle, under power, or decommissioned. One band saw in a back corner and a full fabrication floor get the same handling, one quote and one pickup, and we can arrange rigging, crating, and freight in all 50 states, with the pickup arranged for you. Machine Tool Exchange, founded in 2012, is an affiliate of Superior Machine and Tool and a direct used-equipment buyer, not an Amada dealer or service center. If the floor is mixed, the Amada does not have to leave alone. We also buy Mazak, Haas, Okuma, Doosan, DMG MORI, and Makino equipment, so a shop clearing a laser, a brake, and a machining center moves all of it in one transaction.

Ready to sell your machine? Tell us what you have and get a competitive offer in 24-48 hours. We can arrange the removal, rigging and logistics, and the truck to move it.

Machine Tool ExchangeNationwide CNC machine buyer since 2012

Cash Out Your Used Machines
  • 24-48h quote
  • Coast-to-coast

Customer Reviews

Industrial machineryIndustrial machineryIndustrial machinery

Superior Machine & Tool completed the removal of all our equipment precisely according to our timeline and specifications. Their professionalism and reliability made them a pleasure to work with, and we highly recommend their services.

MTE CustomerEquipment Seller

Closing down our facility was stressful, but these folks made selling our surplus equipment fast and easy. Their team handled payment right away and coordinated removal like pros.

MTE CustomerEquipment Seller

We had a deadline for our asset removal, and they removed everything safely and finished ahead of schedule. The whole process was seamless and stress-free.

MTE CustomerEquipment Seller

These guys made the whole process so easy. I got paid fast, and they picked up the equipment right on time.

MTE CustomerEquipment Seller

Common questions

What kinds of Amada machines does MTE buy?

Fiber and CO2 lasers, CNC press brakes, turret punch presses, shears, and band saws, any condition, any quantity, from one machine to a full fabrication floor.

How fast can I get a number on an Amada?

Usually 24 to 48 hours once we have the model, serial, year, control type, and condition. Wattage and run hours, or tonnage and station count, shorten it further.

Do you buy non-running or older Amada machines?

Yes. Running, idle, under power, or decommissioned all get an offer. Older CO2 lasers and hydraulic brakes are still machines we buy, including the early NC units.

Does the control generation change the offer on an Amada?

More than any other detail. A current Amada AMNC control and an older or Delem-class unit put the same iron in two different places, and on an older brake or punch that gap can be wide.

What details raise the number on a press brake or turret punch?

On a brake: tonnage, bed length, and back-gauge axes. On a turret punch: tonnage, station count, hit rate, and servo-electric versus hydraulic drive. Tooling and dies count too.

Can you arrange rigging, freight and the pickup?

MTE can arrange rigging, crating, freight and the pickup nationwide. No consignment, no waiting on a third-party sale.

Will you buy the whole fab floor, not just the Amada machines?

Yes, on one quote and one pickup. Mazak, Haas, Okuma, Doosan, DMG MORI, and Makino are brands we buy, so a mixed floor does not need two transactions.

What is a used Amada press brake worth?

There is no list price for a used one. The number turns on the exact model string, the control generation, the back-gauge axes and crowning, the punches and dies that go with it, and whether the ram holds position and bends to angle along the full bed. Send those with a photo of the powered-up control and we come back with a figure.

Where are Amada press brakes made?

In both Japan and the US. Amada calls its Fujinomiya and Toki works the mother factories for its sheet metal machines, where major modules are built and then sent to the group's production bases abroad. Its Carolina Manufacturing Center in High Point, North Carolina, opened on December 6, 2019, and builds Amada's high-precision hybrid-drive press brakes.

What is the Amada press brake?

It is Amada's line of CNC bending machines for sheet metal. Amada began producing press brakes in 1965, the year it also launched the RG series and signed a technical assistance agreement with France's PROMECAM SISSON-LEHMANN. Its current US range includes the EGB e Series electric brake, the HRB high-precision hybrid-drive brake and the HG servo/hydraulic brake. On a used RG, FBD or HFE, the full model string and the control decide most of the offer.

What is an Amada turret punch press?

It is a CNC sheet metal machine that punches holes and shapes with tools held in a rotating turret. Amada says it set the global benchmark in turret punch press technology and has more than 30,000 of the machines in operation worldwide. Its current US turret line includes the EM ZRT e, the EMK M2 Series and the AE NT servo-drive series. On a used one, send the station count, tonnage and hit rate with the model.

What is AMADA known for?

Sheet metal machines above all. Amada launched the LYLA-555 in 1971, which it calls the world's first NC turret punch press, began building RG press brakes in 1965, and says more than 30,000 of its turret punch presses are in operation worldwide. Its group also covers cutting machines, stamping presses, welding and grinding. We buy used Amada punches, brakes, lasers and saws from the shops that own them.

What is an AMADA laser?

It is a laser cutting machine for sheet metal, built by Amada. Amada made Japan's first CO2 laser machine, the LASMAC-644, in 1980, developed its own fiber laser oscillator in 2010 for the FOL-3015AJ, and launched the ENSIS fiber series in 2014. Its current US laser lineup is fiber, with ENSIS machines listed from 3 kW to 15 kW, and Amada builds lasers for North America at its plant in Brea, California.

What is an Amada APELIO?

APELIO is Amada's punch and laser combination machine. Amada announced the APELIO series in 1987, the year it developed combination punch and laser processing technology, so one machine can punch and laser-cut the same sheet. Amada's current combination machines in the US are the EML, ACIES and LC fiber models. On an APELIO, tell us the laser's output and hours along with the condition of the punching side.

When did Amada start making RG press brakes?

In 1965. That year Amada signed a technical assistance agreement with PROMECAM SISSON-LEHMANN of France, began producing press brakes and launched the RG series. Amada acquired Promecam in 1986 and set up AMADA S.A., now AMADA EUROPE. If you have an RG-50 or RG-80, the data plate tells us which run it came from.

Thinking about selling Amada Machines?

Fabricators shopping a used Amada ask about the control first, which is why an ENSIS on a current AMNC screen draws a different conversation than an RG-80 on an older Delem-class unit. Send the data plate and a photo of that screen, and Jason Puuri weighs it against laser source hours, ram and back-gauge condition, and whether the machine still bends accurate parts.

  • Fast Response
  • Fair Offers
  • Hassle-Free Process

Tell us what you’re selling

Send us the make and model and we’ll come back with a cash offer. Most sellers hear from us the same business day.

What happens next

  1. Same business dayWe confirm your details and ask anything we’re missing.
  2. Within 24–48 hoursYou receive a purchase proposal.
  3. On your timelineSigned agreement, then we can arrange rigging & pickup.

We only use your details to value your machine and get back to you. No lists, no resale.