CNC Vertical Machining Centers (VMC)

Liechti GO-MILL-350

1 Liechti GO-MILL-350 listing has come through the used market we track, all built 2007.

What the maker publishes about the current Liechti GO-MILL-350

From LIECHTI, the go-MILL 350 is a compact 5-axis machining centre given over entirely to airfoils, cutting single blades, blisks and impellers with simultaneous motion on all five axes. Parts may swing up to 350 mm in diameter. Its spindle reaches 20,000 rpm, is rated at 36 kW with 120 Nm of torque, carries HSK-A63 holders and has vector control integrated into it. A tool changer with 30 or 60 positions serves it, also in HSK-A63. Work is held on a pivot table in a double-end rotary configuration; LIECHTI also describes that drive as an option, and with it a blade can be turned at up to 1,000 rpm. An automatic part changer with 16 positions is optional too. Work and tool measuring appear in the specification, and LIECHTI's own Turbosoft plus CAM software is paired with the machine.

Source: LIECHTI, October 27, 2026.

What the Liechti GO-MILL-350 is used for

On LIECHTI's page the go-MILL 350 serves aerospace and power generation customers milling airfoils: blisks, impellers and single blades with a swing of up to 350 mm.

Source: LIECHTI, October 27, 2026.

Liechti GO-MILL-350 specifications

Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.

Figures as currently published; an older unit may differ in control generation and options.

Capacity and travels

Axes5-axis

5-axissimultaneous

Spindle and speed

Max spindle speedSpindle

20,000 rpm

Spindle motor powerSpindle

36 kW

Spindle taperSpindle

HSK-A63

Table, turret and tools

Tool capacityTool changer

30 or 60 positions, HSK-A63

Further figures the manufacturer publishes

Blade swing dia. max.

350 mm

Spindle

120 Nm

Pivot table

Double end rotary configurationthe page's highlights call the double-end rotary drive an option

Turning capability

up to 1,000 rpmwith the double-end rotary drive option

Automatic part changer

16-positionoptional

CAM

LIECHTI Turbosoft plus

manufacturer specification page, fetched October 27, 2026.

What fits a Liechti GO-MILL-350

Each of these follows from a published specification above, which is named beside it.

HSK-A63 tooling

This machine takes HSK-A63 tooling — a hollow-shank interface, not a 7:24 steep taper. CAT, BT and SK holders do not fit it, and HSK holders of a different size do not fit each other.

Derived from Spindle taper: HSK-A63

What to check on a Liechti GO-MILL-350

Spindle. The manufacturer gives a spindle speed of 20,000 rpm. Run the spindle to top speed and listen for bearing noise.
Spindle load. The manufacturer gives 36 kW of spindle power and 120 Nm of spindle torque. Take a heavy cut and watch the load meter.
Spindle taper. The manufacturer gives a spindle taper of HSK-A63. Check it for fretting and that the drawbar holds a tool.
Tool changer. The manufacturer gives the tool capacity as 30 or 60 positions, HSK-A63. Cycle every pocket and watch for a hesitation.
Rotary axes. The manufacturer gives 5-axis (simultaneous) axes. Run each rotary axis through its range.

Liechti GO-MILL-350 listing history

Where it was listed

surplusrecord.com

1 listing, 2007

Model years seen

2007.

Looking for a Liechti GO-MILL-350 for sale?

We have tracked 1 Liechti GO-MILL-350 listing on 1 marketplace (surplusrecord.com), model year 2007. We buy Liechti GO-MILL-350 machines and do not sell them.

2007

Every Liechti GO-MILL-350 we have tracked

2007 Liechti GO-MILL-350