Metal Cutting
Haas V2
4 Haas V2 listings have come through the used market we track, built 2015–2024.
What the maker published about the Haas V2
Haas Automation's page for the V2 lists Bar Diameter Range (varies w/lathe model) at 0.375 in to 3.00 in (10 mm to 76 mm), Bar Length Capacity at 48 in (1219 mm) and Recommended Max Bar in Spindle at 48 in (1219 mm). The page also lists Minimum Bar Length at 10 in (254 mm), Tray Capacity at 30 EA x 1 in (30 EA x 25 mm) and Staging Area Width at 30 in (762 mm). The page gives Max Weight of Total Bars as 650 lb (295 kg), Lift Arm Max Weight Limit as 80 lb (36 kg) and Maximum Thrust Push Limit as 100 lbf (445 N). The bar feeder is described as built only for Haas turning centers, and it links straight to the Haas control. The page cautions that running thin material in any bar feeder can be hard, and thin bars may whip even at slower speeds, which can hurt surface finish. A rollaway design gives access to the rear of the spindle for liner changes.
Source: Haas Automation, an archived copy of the maker's page from 2025, November 3, 2026.
What the Haas V2 is used for
The bar feeder is made to automate part production on Haas turning centers, and it is built only for use on those lathes.
Source: Haas Automation, an archived copy of the maker's page from 2025, November 3, 2026.
When the Haas V2 was built
Haas Automation's page for the V2 was captured by the Wayback Machine in July 2025, so the model was in production by 2025.
Source: Haas Automation, an archived copy of the maker's page from 2025, November 3, 2026.
Haas V2 listing history
Where it was listed
surplusrecord.com
4 listings, 2015–2024
Filed under Metal Cutting (4).
Model years seen
2024, 2021, 2017, 2015.
Looking for a Haas V2 for sale?
We have tracked 4 Haas V2 listings on 1 marketplace (surplusrecord.com), model years 2015 to 2024. We buy Haas V2 machines and do not sell them.
Every Haas V2 we have tracked
2021 Haas V2
2017 Haas V2
2015 Haas V2
The Haas V2 among machines
Browse all Metal Cutting, or see every Haas machine we track.
Other Metal Cutting models in this directory
Haas BARFEEDER V2
- Units tracked
- 9
- Years seen
- 2015–2025
Haas CM-1
- Units tracked
- 4
- Years seen
- 2017–2019
Haas VF5-40TR
- Units tracked
- 2
- Years seen
- 2001–2004
Have a Haas V2 to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
