What the maker published about the Haas DC 4 40
Haas Automation's page for the DC 4 40 lists X Axis at 98.40 in (2500 mm), Y Axis at 19.70 in (500 mm) and Z Axis at 11.80 in (300 mm). Taper is listed at CT40, while the spec sheet gives Max Weight on Table (evenly distributed) at 1323 lb (600 kg). The sheet shows Rapids on X at 1890 ipm (48.0 m/min), Rapids on Y at 1890 ipm (48.0 m/min) and Rapids on Z at 1890 ipm (48.0 m/min). The page lists Capacity at 20, Max Tool Diameter (full) at 4.3 in (110 mm) and Tool-to-Tool (avg) at 1.50 s. The machine is described as a gantry-style drill and tap machine made for long, narrow parts. Input AC Voltage (3 Phase) - Low is listed at 220 VAC and Full Load Amps (3 Phase) - Low at 40 A.
Source: Haas Automation, an archived copy of the maker's page from 2025, November 3, 2026.
What the Haas DC 4 40 is used for
Haas describes it as a gantry-style drill and tap machine for long, narrow parts such as extrusions, channel, angle iron and pipe, used in construction, automotive and aviation work.
Source: Haas Automation, an archived copy of the maker's page from 2025, November 3, 2026.
When the Haas DC 4 40 was built
Haas Automation's page for the DC 4 40 was captured by the Wayback Machine in January 2025, so the model was in production by 2025.
Source: Haas Automation, an archived copy of the maker's page from 2025, November 3, 2026.
The Haas DC 4 40 among machining centers and mills
Browse all CNC Vertical Machining Centers (VMC), or see every Haas machine we track.
Models related to the Haas DC 4 40
Haas DC 3 40
Same series
Have a Haas DC 4 40 to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
