Doosan PUMA TT1800SY

What the maker publishes about the current Doosan PUMA TT1800SY

DN Solutions builds the PUMA TT1800SY as a horizontal turning center with a left and a right spindle, two turrets and a Y-axis. Its specification includes live tooling and a sub-spindle built into the machine. Each spindle and each turret runs independently of the others. Chuck size is 8 inch. Turning capacity is 230 mm in diameter and 230 mm in length. The X-axis travels 165 mm, the Y-axis 100 mm, and the Z-axis 700 mm. Rapid traverse reaches 20 m/min in X and 40 m/min in Z. The main spindle turns to 5000 r/min and is rated at 22 kW with 208 N·m of torque. The sub-spindle on the right side matches it at 5000 r/min and 22 kW. The turret specification lists 12 tool stations, with rotary tools driven to 6000 r/min. Roller LM guideways carry the axes. Each spindle has its own parts catcher and unloader. The machine weighs 8800 kg.

Source: DN Solutions, September 27, 2026.

What the Doosan PUMA TT1800SY is used for

DN Solutions aims the PUMA TT line at fast mass production of close-tolerance automotive and medical parts, and the TT1800SY brings a Y axis, live tooling and a built-in sub-spindle to that work.

Source: DN Solutions, October 14, 2026.

Doosan PUMA TT1800SY specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 14, 2026.

What fits a Doosan PUMA TT1800SY

Each of these follows from a published specification above, which is named beside it.

Doosan PUMA TT1800SY equipment and options

Options on the 37 Doosan PUMA TT1800SY units we tracked

• Sub-spindle 9 of 37
• Live tooling 6 of 37
• Y-axis 4 of 37

What to check on a Doosan PUMA TT1800SY

• Spindle. The manufacturer gives a spindle speed of 5000 r/min. Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 22 kW (29 hp) of spindle power and 208 N·m (153 ft-lb) of spindle torque. Take a heavy cut and watch the load meter.
• Axes and way covers. The manufacturer gives X 165 mm (6 inch), Y 100 mm (4 inch) and Z 700 mm (28 inch) of travel. Run each axis end to end and check the way covers.
• Rapids and ballscrews. The manufacturer gives a rapid traverse of X-Axis Rapid Traverse 20 m/min (787 ipm), Z-Axis Rapid Traverse 40 m/min (1575 ipm). Measure the backlash on each axis.
• Turret. The manufacturer gives the turret stations as 12. Index every station and time a full turn.
• Chuck and bar. The manufacturer gives a chuck size of 8 inch. Check the jaws and the grip pressure.
• Bed and ways. The manufacturer gives a max turning diameter of 230 mm (9 inch) and a max turning length of 230 mm (9 inch). Check the ways for wear near the chuck.
• Rotary tools. The manufacturer gives the rotary tooling as 6000 r/min. Check that the rotary tools still drive under load.
• Second spindle. The manufacturer gives a sub spindle: max. spindle speed of 5000 r/min. Check that it synchronizes on a part transfer.
• Rigging and floor. The manufacturer gives a machine weight of 8800 kg (19401 lb), a machine length of 3905 mm (154 inch), a machine width of 2250 mm (89 inch) and a machine height of 2080 mm (82 inch). Confirm the rigging route and the floor will take that.

Doosan PUMA TT1800SY listing history

Where it was listed

Filed under CNC Multi-Tasking Machines (Mill-Turn / Turn-Mill) (25), CNC Lathes (15) and CNC Turning Centers (1).

Model years seen

2022, 2021 ×2, 2020, 2019 ×2, 2017 ×4, 2016 ×3, 2015 ×2, 2014, 2013 ×7, 2012 ×2, 2011 ×4, 2010, 2008, 2007 ×6, 2006 ×7.

What Doosan PUMA TT1800SY listings agree on

What affects the value of a used Doosan PUMA TT1800SY

• Options. The units we tracked split on spindle power (30 hp on 19 machines, 25 hp on 4 machines), tool capacity (12 on 3 machines, 24 on 3 machines) and turret stations (12 on 4 machines, 24 on 4 machines).
• Build year. The units we tracked were built from 2006 to 2022, across 15 model years.
• Against the published figures. The manufacturer gives max spindle speed 5000 r/min, spindle motor power 22 kW (29 hp), turret stations 12 and chuck size 8 inch.

Looking for a Doosan PUMA TT1800SY for sale?

We have tracked 46 Doosan PUMA TT1800SY listings on 8 marketplaces (exapro.com, surplusrecord.com, usedcnc.com, machinetools.com, usedmachinerysales.com, premierequipment.com, revelationmachinery.com and machinesused.com), model years 2006 to 2022. We buy Doosan PUMA TT1800SY machines and do not sell them.

2022 · 2021 · 2020 · 2019 · 2019 · 2017 · 2017 · 2017 · 2016 · 2016 · 2015 · 2015 · 2014 · 2013 · 2013 · 2013 · 2013 · 2013 · 2012 · 2011 · 2011 · 2010 · 2008 · 2007 · 2007 · 2007 · 2007 · 2007 · 2006 · 2006 · 2006 · 2006 · 2006 · 2006 · 2006 · year not given · year not given

Every Doosan PUMA TT1800SY we have tracked

13 more Doosan PUMA TT1800SY machines

The Doosan PUMA TT1800SY among lathes and turning centers

Browse all CNC Multi-Tasking Machines (Mill-Turn / Turn-Mill), or see every Doosan machine we track.

Models related to the Doosan PUMA TT1800SY

1. Doosan Puma TT 2500 SY: manufacturer specification page, fetched October 14, 2026.
2. Doosan PUMA TT1800SY: manufacturer specification page, fetched October 14, 2026.
3. Doosan PUMA TT1300SYY: manufacturer specification page, fetched October 27, 2026.
4. Doosan PUMA TT-2100SYY: manufacturer specification page, fetched October 27, 2026.