Used Bost Machines We Buy
Used Bost machines are bought outright: Machine Tool Exchange purchases them direct from the companies that own them, no consignment, no broker. Bost Machine Tools Company of Asteasu, Spain, builds heavy vertical lathes, Bostram boring machines and horizontal lathes, and the Bost machines on our book are VTL16C vertical turret lathes, two Bostram machines and a T4F, built from 2005 to 2016.
- 6Bost units indexed
- 24–48hQuote turnaround
- Since 2012Buying machines
- DirectNot a broker

How Selling Your Bost Works
Tell us what you have
Send the model string from the Bost plate, whether a VTL C such as a VTL16C-1400, an SM C, a VTH C, a Bostram or a T4F or T4H horizontal lathe, plus the year, the turning diameter or X travel, the heads, the control and photos of the plate and the machine.
Get a quote within 24-48 hours
We price your Bost on its size, its heads and its condition and send an offer, usually within 24 to 48 hours. We are a direct buyer, not a broker, and we have been buying machines since 2012.
We can arrange rigging, freight and pickup
Accept the offer and we can arrange the rigging, crating, freight and pickup, planned around the table and foundation of a heavy Bost vertical lathe or the bed of a Bostram.
6 machines, page 1 of 1
- CNC Vertical Turret Lathes (VTL)Bost VTL16C-1400 (2005)
- CNC Vertical Turret Lathes (VTL)Bost VTL16C (2005)
- CNC Vertical Turret Lathes (VTL)Bost VTL16C-1400 (2011)
- Metal CuttingBost BOSTRAM 160 (2005)
- Metal CuttingBost BOSTRAM (2005)
- Metal CuttingBost T4F (2016)
Who Builds Bost Machines
Bost machines are built by Bost Machine Tools Company in Asteasu, Gipuzkoa, Spain. Bost was founded in 1972 under the name Talleres Bost as a retrofitting business, made its first expansion in 1979 and rebuilt its first CNC machine, a flag type heavy duty lathe, in 1981. The turning point came in 1987, when Etxea, a horizontal lathe maker in Hernani, joined the Bost group and Bost began building new machine tools.
In 1991 Bost built its fourth and fifth pavilions to assemble high vertical lathes and boring machines, and in 1994 it built the T4F, its first horizontal turning and milling machine, with a turning column carrying a milling head on one side; it went to the Sidenor group. Bost opened a Beijing office in 2010. The group also takes in Bostek Innovation, its technology centre, and Bostmek Machining, which machines heavy parts up to 6,000 mm in diameter.
Bost's Lines Today
Bost designs, builds and installs heavy duty machine tools and says it builds them to the customer's specification. Its vertical lathes come as the VTL C series, from the VTL 16 C to the VTL 85 C, the SM C series from the SM 20 C to the SM 63 C, and the larger VTH 100 C and VTH 160 C. Its horizontal lathes run from the T4H15 to the T6H35, and its Bostram boring machines come in 5.000, 6.000 and 7.000 sizes with boring spindles from 160 to 260 mm.
Bost machines run in North American shops too. Bost's news page points to a Cutting Tool Engineering article on Magna Machine of Cincinnati, where a Bost VTL 60 CY vertical lathe and a Bost T4F turn-mill horizontal lathe do heavy work, and it reports an extra-large Bost VTL and borer going to Sheffield Forgemasters.
Reading a Bost Model Name
On a Bost VTL C the number follows the maximum turning diameter: Bost's table pairs the VTL 16 C with the smallest turning diameter in the series and the VTL 85 C with the largest. A string such as VTL16C-1400, as on two of our listings, adds a second figure, which we check against the table size on the machine rather than assume. Our VTL16C listings are dated 2005 and 2011, and the 2011 machine is recorded with a Siemens 840D control.
A Bostram string may carry a figure too. Our BOSTRAM listing, from 2005, is recorded with a 160 mm spindle and 14,000 mm of X travel, and the other is entered as BOSTRAM 160; since Bostram spindles start at 160 mm, we confirm from the plate what that figure means. The T4F on our book, dated 2016, shares its name with the turn-mill machine Bost first built in 1994.
What Is in the Bost Hub Right Now
The Bost machines in this hub are heavy turning and boring machines. Three are VTL16C vertical turret lathes: two entered as VTL16C-1400, dated 2005 and 2011, and one entered as VTL16C, dated 2005. Two are Bostram boring machines from 2005, one entered as BOSTRAM and one as BOSTRAM 160. The sixth is a T4F dated 2016, a model Bost's own history names as its first horizontal turning and milling machine. Other listings were once filed under the Bost name that are not Bost machines: BD605 and BD 605 5-axis mills, one of which its own text names as a Bostomatic, a BD22TS and an HPM-810G 3-axis mill whose model names appear nowhere in Bost's range, a C110 AC that its text names as a Boston Matthews extruder, and one listing whose whole designation is the word PNEUMATIC. This is a small corner of what we buy, and the specifics are the point rather than the size.
The VTL16C Vertical Turret Lathes
VTL16C is the largest Bost family in this hub at 3 listings: two entered as VTL16C-1400 and one entered as VTL16C. All three are filed under CNC Vertical Turret Lathes, and 3 is also the entire VTL count for this hub, so the family and the category are the same three machines. VTL16C-1400 is the only model string anywhere in this hub that appears more than once. What actually gets looked at on a used vertical turret lathe, whether a shop is buying or we are scoping: table diameter and swing, the condition of the rail and the ram, turret and tool station count, chuck and jaw condition, whether it still holds tolerance under a cut rather than only in air, and the floor and rigging picture, because a VTL is not a machine anybody moves casually. We ask about those rather than assume them, so tell us how yours is configured.
BOSTRAM, the T4F, and Why the BD605 Is Not a Bost
The BD605 5-axis machines in this heading are not Bost machines. Our catalog carried two of them, one entered as BD605 5 AXIS CNC MILL and one as BD 605 5-AXIS CNC VMC, and the first one's own text names its maker as Bostomatic. Bost's range has no BD model and no 5-axis vertical machining center, so neither BD605 is a Bost, and the same goes for the BD22TS, the HPM-810G 3-AXIS CNC MILL, a C110 AC that its listing names as a Boston Matthews extruder, and the listing whose entire designation is the word PNEUMATIC. BOSTRAM is the real Bost family here at 2 listings, one entered simply as BOSTRAM and one as BOSTRAM 160: Bost lists its Bostram boring machines in 5.000, 6.000 and 7.000 sizes with boring spindles from 160 to 260 mm. The T4F is a Bost one-off; Bost's history says it built its first horizontal turning and milling T4F machine in 1994.
What MTE Looks At Before Making an Offer on a Bost
Jason Puuri scopes these one machine at a time instead of running a Bost model line through a formula, and on a Bost that is not a slogan. Bost builds to the customer's specification, so two machines with the same family name can differ a great deal, and there is no blanket Bost number available to apply. What moves an offer: capacity and configuration, such as the turning diameter and height on a vertical lathe or the X travel and spindle diameter on a Bostram, the tooling and workholding that comes with the machine, whether it still holds tolerance, hours and service history where the shop actually tracked them, whether it is currently under power and can be demonstrated, and the rigging picture, which on a vertical turret lathe or a long boring machine is part of the conversation rather than an afterthought. Age by itself settles very little on a Bost. The Bost listings here run from 2005 machines to a 2016 T4F, and the year on the plate tells us far less than condition, configuration, and what comes with the machine.
Bost Service and Retrofit, or Selling Outright
Retrofitting is where Bost started in 1972, and its Bost Service arm still rebuilds machine tools: extending slideways, fitting more powerful heads, adding a RAM and barycentric compensation, automatic tool changers and pallet systems, and installing a new numerical control. It also runs after-sales service aimed at cutting the time a machine stands still.
That route suits a Bost vertical lathe you mean to keep turning. For a Bost that is surplus, we buy it outright as it stands, and retrofit and service records are worth sending with the plate details.
Selling a Bost Outright Instead of Listing It
Machine Tool Exchange is a division of Superior Machine and Tool, and we buy the machine. Not a consignment arrangement, not a listing service, not a broker introduction where your money waits on somebody else showing up later. The offer is ours and it stands on the machine in front of us. One Bost or a full row of them, on the same terms. Running or not running. Idle since the job that justified it ended, or coming out during a changeover. A VTL16C carries a rigging and floor footprint no seller should be coordinating alone, so we can arrange the rigging, crating, freight and pickup. Before pickup is scheduled we confirm ownership paperwork: a bill of sale, and proof the company owns the machine outright rather than still carrying it on a lease or finance agreement. A Bost often stays in one plant for many years, so those records can be a long way back, and that is normal.
Bost Models That Do Not Appear on This Page
A small hub is not going to show you your exact machine, and that is not a disqualifier. Bost's own range runs far wider than our listings: VTL C vertical lathes from the VTL 16 C to the VTL 85 C, SM C and VTH C vertical lathes, T4H, T5H and T6H horizontal lathes, and Bostram boring machines, each built to the customer's specification. An unfamiliar Bost number is the normal case here, not the exception. Read the string off the data plate and send it exactly as it reads, spacing and all, because that is usually enough for us to place the machine before anything else gets discussed. One more thing worth saying plainly: a Bost rarely leaves a plant on its own. Okuma, Doosan, Mazak, Haas, DMG MORI, Makino and Toshiba equipment are all things we buy elsewhere in the catalog, none of them in this Bost hub, so a mixed floor can go on one pickup schedule.
Sources for the Bost facts on this page
- Bost Machine Tools Company, home page (company, history, products, services and news)
- Bost VTL16C-1400 (2011), Machine Tool Exchange listing
- Bost VTL16C-1400 (2005), Machine Tool Exchange listing
- Bost BOSTRAM (2005), Machine Tool Exchange listing
- Bost BOSTRAM 160 (2005), Machine Tool Exchange listing
- Bost T4F (2016), Machine Tool Exchange listing
Ready to sell your machine? Tell us what you have and get a competitive offer in 24-48 hours. We can arrange the removal, rigging and logistics, and the truck to move it.
Machine Tool ExchangeNationwide CNC machine buyer since 2012
- 24-48h quote
- Coast-to-coast
Customer Reviews



Superior Machine & Tool completed the removal of all our equipment precisely according to our timeline and specifications. Their professionalism and reliability made them a pleasure to work with, and we highly recommend their services.
Closing down our facility was stressful, but these folks made selling our surplus equipment fast and easy. Their team handled payment right away and coordinated removal like pros.
We had a deadline for our asset removal, and they removed everything safely and finished ahead of schedule. The whole process was seamless and stress-free.
These guys made the whole process so easy. I got paid fast, and they picked up the equipment right on time.
Common questions
How do I sell a Bost machine?
Send the data-plate designation, capacity, approximate age, condition, and photos. Machine Tool Exchange, a division of Superior Machine and Tool, returns a written offer directly.
Do you buy Bost VTL16C vertical turret lathes?
Yes. VTL16C is the largest family here at 3 listings, all filed under CNC Vertical Turret Lathes, and VTL16C-1400 is the only string in this hub that repeats.
Will you buy a Bost 5-axis machine like the BD605?
Yes, we buy 5-axis machines, but the BD605 is not a Bost. One of our BD605 listings names its maker as Bostomatic, and Bost's own range has no BD model; Bost builds vertical lathes, Bostram boring machines and horizontal lathes. Send the plate and we will file and price your machine under its real maker.
My Bost model number is not shown on this page. Do you still buy it?
Yes, and it is the normal case here. Our Bost listings cover only the VTL16C, the Bostram and the T4F, while Bost builds many more sizes and builds them to order. Send the data-plate string.
Is this a listing service, or does MTE buy the machine itself?
We buy it. Machine Tool Exchange purchases outright as a division of Superior Machine and Tool. Not consignment, not a listing, not a broker, so nothing waits on a buyer.
Should I put a Bost VTL through an auction instead?
That is a trade in behavior, not in figures. An auction sets a date and lets whoever shows up decide. An outright purchase settles the number before the machine moves, and we scope the VTL in front of us rather than a Bost model line.
What paperwork do I need to sell a Bost?
A bill of sale, proof the company owns the machine outright rather than carrying it on a lease or finance agreement, and any service records. A Bost often stays in one plant for many years, so old paperwork is normal. We confirm ownership before scheduling pickup.
What is Bost Machine Tools Company?
Bost Machine Tools Company is a Spanish builder of heavy duty machine tools that designs, makes and installs vertical lathes, Bostram boring machines and horizontal lathes. It was founded in 1972 as Talleres Bost, a retrofitting shop, and began building new machine tools after the Hernani lathe maker Etxea joined the group in 1987.
Where is Bost Machine Tools Company in Spain?
Bost is on the Villabona-Asteasu road in Asteasu, in the province of Gipuzkoa, Spain, where its assembly halls for high vertical lathes and boring machines went up in 1991. It opened a Beijing office in 2010 for the Asian market. A Bost that has since landed in a North American shop is one we buy.
What is a Bostram?
Bostram is Bost's boring machine family. Bost lists it in Bostram 5.000, 6.000 and 7.000 sizes with boring spindle diameters from 160 to 260 mm. Our two Bostram listings both date from 2005, and the one entered as BOSTRAM is recorded with a 160 mm spindle and 14,000 mm of X travel.
What are Bost VTL C vertical lathes?
VTL C is Bost's main vertical lathe series, which it showed at BIEMH as multi-process vertical centres for heavy industry. Sizes run from the VTL 16 C to the VTL 85 C, the number rising with the maximum turning diameter, and Bost also builds the SM C and the larger VTH C. Our three VTL16C listings belong to the smallest size of the family.
Thinking about selling Bost Machines?
Bost builds its vertical lathes and Bostram boring machines to the customer's specification, so a VTL16C-1400 or a BOSTRAM 160 on this page tells you little about yours. Jason Puuri scopes the specific machine, not the model line. Send the data-plate string as it reads plus a few photos, and a written offer comes back.
- Fast Response
- Fair Offers
- Hassle-Free Process




