Tsugami TMA8F

What the maker publishes about the current Tsugami TMA8F

Tsugami's TMA8F is a turn/mill multitasking turning center that pairs a main and a sub spindle with a B-axis tool spindle, and the maker lists full 5-axis simultaneous machining. Bar capacity is 65 mm, work diameter reaches 220 mm and work length 580 mm. It carries an 8 inch chuck. The main spindle turns 5,000 rpm with 20hp, and the sub spindle, which has full C-axis motion, turns 5,000 rpm with 10hp. The tool spindle runs to 20,000 rpm on a 15hp built-in motor. The tool changer holds 60 CAPTO C4 tools as standard, mixing turning and milling tools in one magazine, at 0.8 sec tool to tool. Coolant through the tool spindle reaches 1,000psi max. Glass scales on X, Y and Z, a touch probe and a parts catcher are standard, and a 4GB data server is also listed. Control is a FANUC 31i-B5. The machine weighs 8,500 kg on a 3,700 x 2,126 x 2,250mm footprint. A Royal QC collet system, part unloader, part conveyor and mist collector are options.

Source: Tsugami America, October 27, 2026.

What the Tsugami TMA8F is used for

Tsugami America describes the TMA8F as a turn-mill that finishes a part complete with full 5-axis simultaneous milling, taking large-diameter work in its 8 inch chuck or bar stock up to 2.5 inch through the spindle with a collet system.

Source: Tsugami America, October 27, 2026.

Tsugami TMA8F specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 27, 2026.

What fits a Tsugami TMA8F

Each of these follows from a published specification above, which is named beside it.

What to check on a Tsugami TMA8F

• Control generation. The manufacturer specifies FANUC 31i-B5 for this model. Units we have tracked run 2021 to 2022; an early one may carry an older control or a retrofit.
• Spindle. The manufacturer gives a spindle speed of 5,000 rpm. Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 20hp of spindle power. Take a heavy cut and watch the load meter.
• Tool changer. The manufacturer gives the tool capacity as 60 CAPTO C4 Tools Standard. Cycle every pocket and watch for a hesitation.
• Chuck and bar. The manufacturer gives a chuck size of 8 inch and a bar capacity of 65 mm. Check the jaws and the grip pressure; check any bar feeder is set for that bar.
• Bed and ways. The manufacturer gives a max turning diameter of 220 mm and a max turning length of 580 mm. Check the ways for wear near the chuck.
• Rotary tools and second spindle. The manufacturer gives the rotary tooling as 20,000 rpm, 15hp. Check that the rotary tools still drive under load. The manufacturer gives the second spindle as 5,000 rpm, 10hp. Check that it synchronizes with the main spindle on a part transfer.
• Rigging and floor. The manufacturer gives a machine weight of 8,500 kg and a floor space of 3,700 x 2,126 x 2,250mm. Confirm the rigging route and the floor will take that.

Tsugami TMA8F control

• Control FANUC 31i-B5

Tsugami TMA8F listing history

Where it was listed

Model years seen

2022, 2021.

What Tsugami TMA8F listings agree on

What affects the value of a used Tsugami TMA8F

• Control. The manufacturer specifies FANUC 31i-B5.
• Build year. The units we tracked were built from 2021 to 2022, across 2 model years.
• Against the published figures. The manufacturer gives max spindle speed 5,000 rpm, spindle motor power 20hp, tool capacity 60 CAPTO C4 Tools Standard and chuck size 8 inch.

Looking for a Tsugami TMA8F for sale?

We have tracked 2 Tsugami TMA8F listings on 2 marketplaces (equipt.com and surplusrecord.com), model years 2021 to 2022. We buy Tsugami TMA8F machines and do not sell them.

2022 · 2021

Every Tsugami TMA8F we have tracked

The Tsugami TMA8F among lathes and turning centers

Browse all CNC Lathes, or see every Tsugami machine we track.

Related CNC Lathes models in this directory

1. Tsugami SS20: manufacturer specification page, fetched October 27, 2026.
2. Tsugami TMA8F: manufacturer specification page, fetched October 27, 2026.