Haas VF-2SS

What the maker publishes about the current Haas VF-2SS

Haas gives the VF-2SS its Super-Speed traits: a spindle of 12000 rpm with inline direct drive, a side-mount tool changer, and rapids of 1400 ipm on every axis. This VF Series machine mills in three axes. X, Y and Z travel 30.00, 16.00 and 20.00 in respectively. The spindle is rated 30.0 hp, with its torque maximum of 90.0 ft-lbf reached at 2000 rpm. BT40, CT40 or HSK-A63 holders fit it. Its changer has 30+1 pockets, with an average tool change of 1.80 s, or 2.40 s chip to chip. Pocket diameter limits are 2.5 in with every pocket filled and 5.0 in when both flanking pockets are vacant. Tool length may reach 11.00 in past the gage line. Cutting feeds run up to 833 ipm. On the table, 36.0 in by 14.0 in, 3 T-slots hold fixtures, and loads are limited to 1500 lb.

Source: Haas Automation, September 27, 2026.

Haas VF-2SS listing history

Where it was listed

Model years seen

2025 (5 units), 2024 (6 units), 2023 (7 units), 2022 (7 units), 2021 (6 units), 2020 (12 units), 2019 (6 units), 2018 (8 units), 2017 (3 units), 2016 (5 units), 2015 (9 units), 2014 (5 units), 2013 (7 units), 2012 (7 units), 2011 (5 units), 2010 (7 units), 2009 (5 units), 2008 (4 units), 2007 (6 units), 2006 (7 units), 2005 (6 units), 2004 (8 units), 2003 (6 units).

What Haas VF-2SS listings agree on

Every Haas VF-2SS we have tracked

114 more Haas VF-2SS machines

7 more listings gave no year.

The Haas VF-2SS among machining centers and mills

Browse all CNC Vertical Machining Centers (VMC), or see every Haas machine we track.

Other CNC Vertical Machining Centers (VMC) models in this directory