Haas DM-2

What the maker publishes about the current Haas DM-2

Haas calls the DM-2 a compact machining center, a three-axis machine in its Drill/Tap/Mill Series, running CT or BT 40-taper holders. X travel is 28.00 in, Y travel 16.00 in, and Z travel 15.50 in. The table measures 34.0 in long and 15.0 in wide, with 3 T-slots. Load limits depend on rapid rate: 250 lb at 100% rapids and 500 lb at 50%. The spindle, driven inline and directly, turns up to 10000 rpm on a 15.0 hp rating. Its maximum torque is 46.0 ft-lbf, reached at 1700 rpm. Tapping is rated to 5000 rpm. Its side-mount changer stores 18+1 tools. Tool changes average 1.75 s, with a chip-to-chip figure of 2.00 s. Tools are capped at 2.5 in across, 12.0 lb, and 7.00 in measured from the gage line. X, Y and Z rapids are 2400 ipm, and cutting feeds run as fast as 1200 ipm. Nose clearance over the table is 6.0 in minimum and 21.5 in maximum.

Source: Haas Automation, September 27, 2026.

Haas DM-2 listing history

Where it was listed

Model years seen

2024 (6 units), 2022, 2021 (5 units), 2020 (4 units), 2019 (4 units), 2018 (7 units), 2017 (7 units), 2016 (2 units).

What Haas DM-2 listings agree on

Every Haas DM-2 we have tracked

11 more Haas DM-2 machines

1 more listing gave no year.

The Haas DM-2 among machining centers and mills

Browse all CNC Vertical Machining Centers (VMC), or see every Haas machine we track.

Other CNC Vertical Machining Centers (VMC) models in this directory