2019 Mazak VTC 800/30SR
2 listings (usedcnc.com)
Spindle power
35 kW
Spindle taper
CAT 40
CNC Vertical Machining Centers (VMC)
Mazak VTC 800/30SR
16 Mazak VTC 800/30SR listings have come through the used market we track: 3 marketplaces, built 2009–2019 where given; 12 machines once repeats are merged.
720 mmZ-axis travel
18,000 RPMSpindle speed
3,000 mmX-axis travel
800 mmY-axis travel
What the maker publishes about the current Mazak VTC 800/30SR
Mazak builds the VTC-800/30SR around a 3500 mm × 820 mm table rated for 2500 kg evenly spread. Linear travels measure 3000 mm in X, 800 mm in Y and 720 mm in Z. A B-axis adds a travel of ±110°. Spindle nose height above the table top ranges from 140 mm to 860 mm. The BT40 spindle reaches 18000 min-1. Its motor is rated 35 kW (47 HP) at 50% ED and 26 kW (35 HP) continuous. Torque peaks at 84 N·m at 50% ED, against 57 N·m on the continuous rating. The automatic tool changer stores 30 tools. Tools may reach Φ80 mm in diameter, or Φ130 mm when neighboring pockets are empty. Tool length is capped at 350 mm and tool weight at 8 kg. X, Y and Z each traverse at 50000 mm/min. For the MAZATROL control version, Mazak gives a width and length of 5250 mm × 4309 mm. Height is 3419 mm. Machine weight is 16300 kg.
Source: Mazak, September 27, 2026.
Mazak VTC 800/30SR specifications
Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.
Figures as currently published; an older unit may differ in control generation and options.
Capacity and travels
X-axis travelTravel X-axis
3000 mm
Y-axis travelTravel Y-axis
800 mm
Z-axis travelTravel Z-axis
720 mm
Spindle and speed
Max spindle speedMax. spindle speed
18000 min-1
Spindle motor powerSpindle motor (50% ED)
35 kW (47 HP)50% ED
Spindle motor powerSpindle motor (cont. rating)
26 kW (35 HP)continuous rating
Spindle taperTool shank
BT40
Rapid traverseRapid traverse rate X-axis
50000 mm/minX-axis
Rapid traverseRapid traverse rate Y-axis
50000 mm/minY-axis
Rapid traverseRapid traverse rate Z-axis
50000 mm/minZ-axis
Table, turret and tools
Table size
3500 mm × 820 mm
Max table loadMax. load (evenly distributed)
2500 kg
Tool capacityTool storage capacity
30
Control
ControlMachine width × length (MAZATROL SmoothX)
MAZATROL SmoothXthe control Mazak states the machine size for
Dimensions and weight
Machine weight
16300 kg
Floor spaceMachine width × length (MAZATROL SmoothX)
5250 mm × 4309 mm
Further figures the manufacturer publishes
Max. torque (50% ED)
84 N･m
Max. torque (cont. rating)
57 N･m
Max. tool diameter
Φ80 mm
Max. tool diameter (without adjacent tool)
Φ130 mm
Max. tool length (from gauge line)
350 mm
Max. tool weight
8 kg
Travel B-axis
±110°
Distance from table top to spindle nose
140 mm to 860 mm
Machine height
3419 mm
- manufacturer specification page, fetched October 14, 2026.
What fits a Mazak VTC 800/30SR
Each of these follows from a published specification above, which is named beside it.
40-taper toolholders
This is a 40-taper spindle — the 7:24 steep taper that CAT-40, BT-40 and DIN 69871 (SK-40) holders all share. They share the taper and nothing else that matters: the retention knob and the flange form differ between those standards, so holders do not swap between them without changing pull studs. Knowing which standard a machine was tooled for is worth doing before the holders are packed. The manufacturer names BT (JIS/MAS 403) for this machine.
Derived from Spindle taper: BT40
What to check on a Mazak VTC 800/30SR
- Control generation. The manufacturer specifies MAZATROL SmoothX for this model. Units we have tracked run 2009 to 2019; an early one may carry an older control or a retrofit.
- Spindle. The manufacturer gives a spindle speed of 18000 min-1. Run the spindle to top speed and listen for bearing noise.
- Spindle load. The manufacturer gives 35 kW (47 HP) (50% ED) or 26 kW (35 HP) (continuous rating) of spindle power. Take a heavy cut and watch the load meter.
- Spindle taper. The manufacturer gives a spindle taper of BT40. Check it for fretting and that the drawbar holds a tool.
- Axes and way covers. The manufacturer gives X 3000 mm, Y 800 mm and Z 720 mm of travel. Run each axis end to end and check the way covers.
- Rapids and ballscrews. The manufacturer gives a rapid traverse of 50000 mm/min (Z-axis). Measure the backlash on each axis.
- Tool changer. The manufacturer gives the tool capacity as 30. Cycle every pocket and watch for a hesitation.
- Table. The manufacturer gives a table size of 3500 mm × 820 mm and a table load of 2500 kg. Check the table and its T-slots for damage.
- Rotary axes. The manufacturer gives Travel B-axis ±110°. Run each rotary axis through its range.
- Rigging and floor. The manufacturer gives a machine weight of 16300 kg and a floor space of 5250 mm × 4309 mm. Confirm the rigging route and the floor will take that.
Mazak VTC 800/30SR control and manuals
- Control MAZATROL SmoothX (the control Mazak states the machine size for)
Mazak's UK site says its iCONNECT customer portal holds the manuals and machine specifications for each machine a registered Mazak customer owns.
Source: Mazak, October 24, 2026.
Mazak VTC 800/30SR listing history
Where it was listed
exapro.com
8 listings, 2009–2016
usedcnc.com
7 listings, 2009–2019
machinetools.com
1 listing
Filed under CNC Vertical Machining Centers (VMC) (14).
Model years seen
2019 ×2, 2016 ×2, 2014 ×2, 2013 ×2, 2012 ×3, 2009 ×3.
What Mazak VTC 800/30SR listings agree on
X-axis travel
3,000 mm
Y-axis travel
800 mm
Z-axis travel
720 mm
Table size
3,500 x 820 mm
Spindle speed
18,000 RPM
Spindle power
35 kW (7 machines); 26 kW (2 machines)
Spindle taper
CAT 40 (2 machines); HSK-A63 (2 machines); BT 40 (2 machines)
Tool capacity
48 (6 machines); 30 (4 machines)
Machine weight
16,100 kg
What affects the value of a used Mazak VTC 800/30SR
- Options. The units we tracked split on spindle power (35 kW on 7 machines, 26 kW on 2 machines), spindle taper (CAT 40 on 2 machines, HSK-A63 on 2 machines, BT 40 on 2 machines) and tool capacity (48 on 6 machines, 30 on 4 machines).
- Control. The manufacturer specifies MAZATROL SmoothX.
- Build year. The units we tracked were built from 2009 to 2019, across 6 model years.
- Against the published figures. The manufacturer gives max spindle speed 18000 min-1, spindle motor power 35 kW (47 HP) (50% ED) or 26 kW (35 HP) (continuous rating), tool capacity 30 and X-axis travel 3000 mm.
Looking for a Mazak VTC 800/30SR for sale?
We have tracked 16 Mazak VTC 800/30SR listings on 3 marketplaces (exapro.com, usedcnc.com and machinetools.com), model years 2009 to 2019. We buy Mazak VTC 800/30SR machines and do not sell them.
2019 · 2016 · 2014 · 2014 · 2013 · 2013 · 2012 · 2012 · 2009 · 2009 · year not given · year not given
Every Mazak VTC 800/30SR we have tracked
2016 Mazak VTC 800/30SR
2 listings (exapro.com)
Spindle power
35 kW
Tool capacity
30
2014 Mazak VTC 800/30SR
Tool capacity
48
2014 Mazak VTC 800/30SR
2013 Mazak VTC 800/30SR
Spindle power
26 kW
Spindle taper
HSK-A63
Tool capacity
30
2013 Mazak VTC 800/30SR
Spindle power
26 kW
Spindle taper
BT 40
Tool capacity
48
2012 Mazak VTC 800/30SR
2 listings (exapro.com, usedcnc.com)
Spindle power
35 kW
Spindle taper
BT 40
Tool capacity
30
2012 Mazak VTC 800/30SR
Spindle power
35 kW
Tool capacity
48
2009 Mazak VTC 800/30SR
Spindle power
35 kW
Spindle taper
HSK-A63
Tool capacity
48
2009 Mazak VTC 800/30SR
2 listings (usedcnc.com)
Tool capacity
48
Mazak VTC 800/30SR (listed as 800/30 SR)
Spindle power
35 kW
Spindle taper
CAT 40
Tool capacity
48
Mazak VTC 800/30SR
Spindle power
35 kW
Tool capacity
30
The Mazak VTC 800/30SR among machining centers and mills
Browse all CNC Vertical Machining Centers (VMC), or see every Mazak machine we track.
Models related to the Mazak VTC 800/30SR
Mazak VTC 800/20 SR
Variant
Mazak VTC-800/30SDR
Variant
Mazak VTC 760C
Same series
Mazak VTC-805E
Same series
Have a Mazak VTC 800/30SR to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
