Mazak INTEGREX I-150

What the maker publishes about the current Mazak INTEGREX I-150

Mazak classes the INTEGREX i-150 as a compact multi-tasking machine in its INTEGREX i series. Bar work runs up to Φ2.56". The chuck is 6″. Parts can be machined to Φ13.39" in diameter. Machined length reaches 15.16". Floor space comes to 5.8 square meters. Axis travel measures 14.57" in X, 17.13" in Z and 11.81" in W. The Y-axis moves 7.87" in total, or ±3.94" about center, on an orthogonal Y-axis layout. B-axis swivel spans -10° to 190°. A backlash-free roller gear cam drives that axis and indexes it in 0.0001-degree steps. Scale feedback closes the loop as standard. A clamping brake holds the B-axis once it is indexed. Oil held at a set temperature by a chiller flows through the spindle and the built-in motor housing. Mazak's Thermal Shield corrects the tool edge position using spindle speed and temperature sensor readings. A work handling system and a tailstock unit are fitted, and turning the part over at that unit links OP1 and OP2 in one continuous run.

Source: Mazak, September 27, 2026.

What the Mazak INTEGREX I-150 is used for

Mazak aims the INTEGREX i-150 at shops that mostly machine small square workpieces and are short of floor space; its work handling unit and tailstock turn the part around so the first and second operations run back to back.

Source: Mazak, October 27, 2026.

Mazak INTEGREX I-150 specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 14, 2026.

What fits a Mazak INTEGREX I-150

Each of these follows from a published specification above, which is named beside it.

Mazak INTEGREX I-150 equipment and options

Options on the 14 Mazak INTEGREX I-150 units we tracked

• Sub-spindle 3 of 14
• Parts catcher 2 of 14

What to check on a Mazak INTEGREX I-150

• Axes and way covers. The manufacturer gives X 14.57", Y 7.87", Z 17.13" and W 11.81" of travel. Run each axis end to end and check the way covers.
• Chuck and bar. The manufacturer gives a chuck size of 6″ and a bar capacity of Φ2.56". Check the jaws and the grip pressure; check any bar feeder is set for that bar.
• Bed and ways. The manufacturer gives a max turning diameter of Φ13.39" and a max turning length of 15.16". Check the ways for wear near the chuck.
• Rotary axes. The manufacturer gives Travel B-axis -10° to 190°. Run each rotary axis through its range.
• Rigging and floor. The manufacturer gives a floor space of 5.8 ㎡. Confirm the rigging route and the floor will take that.

Mazak INTEGREX I-150 listing history

Where it was listed

Filed under CNC Multi-Tasking Machines (Mill-Turn / Turn-Mill) (6), CNC Lathes (5) and CNC Turning Centers (1).

Model years seen

2020, 2018 ×2, 2016, 2012, 2010 ×2, 2008 ×4.

What Mazak INTEGREX I-150 listings agree on

What affects the value of a used Mazak INTEGREX I-150

• Options. The units we tracked split on tool capacity (36 on 3 machines, 72 on 2 machines).
• Build year. The units we tracked were built from 2008 to 2020, across 6 model years, most often 2008 (4 units).
• Against the published figures. The manufacturer gives chuck size 6″, bar capacity Φ2.56", max turning diameter Φ13.39" and max turning length 15.16".

Looking for a Mazak INTEGREX I-150 for sale?

We have tracked 15 Mazak INTEGREX I-150 listings on 8 marketplaces (exapro.com, machinetools.com, machnet.com, quickmachinerysales.com, surplusrecord.com, usedcnc.com, machinesused.com and resellcnc.com), model years 2008 to 2020. We buy Mazak INTEGREX I-150 machines and do not sell them.

2020 · 2018 · 2018 · 2016 · 2012 · 2010 · 2008 · 2008 · 2008 · 2008 · year not given · year not given

Every Mazak INTEGREX I-150 we have tracked

2 more listings, no year.

The Mazak INTEGREX I-150 among lathes and turning centers

Browse all CNC Multi-Tasking Machines (Mill-Turn / Turn-Mill), or see every Mazak machine we track.

Models related to the Mazak INTEGREX I-150

1. Mazak INTEGREX i 400S: archived manufacturer page, fetched September 16, 2026.
2. Mazak INTEGREX I-150: manufacturer specification page, fetched October 14, 2026.