Direct procurement2014 Model

Sell your Zimmermann FZ 37 today.

MTE does not act as a broker, nor do we buy on consignment. We buy machinery and assets outright and arrange the pickup.

Make: Zimmermann
Model: FZ 37
CNC Control: Not specified
Year: 2014
Category: CNC Gantry & Portal Mills
Condition: Used / Surplus

Jason PuuriOwner, Superior Machine & Tool, Inc.Message From MTE Owner

Jason sets final pricing on the machines MTE buys.

Zimmermann FZ 37 Specifications

Spindle Power: 60 HP / 45 kW
Travel Distance Z Axis: 98.42"
Ram Stroke Z-Axis: 98.42"
Taper: HSK A63
Spindle Speed: 25000 RPM
Max. Spindle Speed: 25000 RPM
Motor: 60 HP / 45 kW
Rapids X,Y & Z: 2,362 IPM
Table Size: 118.11" x 391.7"
Nominal Current: Not specified
Spindle Speeds: 25000 RPM
Feed Speed Y Axis: Not specified
Head Travel: 137.79"
Y-Axis: 137.79"
C-Axis Swivel Range: 360° +/-
Acceleration Linear Axes: Not specified
Axis Acceleration X/Y/Z-Axis: Not specified
Reduced Milling Spindle Speed Operating Mode: Not specified
RPM: Not specified
Max Output: Not specified
Tool Diameter Max.: 4.92"
Swivel Axis: Not specified
Power Requirement: Not specified
Table Load Capacity: 11,000 lbs.
Feed Rate X/Y/Z-Axis: Not specified
Milling Head Type: VH20
Housing: Not specified
Gantry: Not specified
Control Cabinet: Not specified
Control System: HEIDENHAIN iTNC 530
Operating Voltage: Not specified
Axis Acceleration X-, Y-, Z-Axis: Not specified
Travel Distance Y Axis: Not specified
Table Dimensions: Not specified
Feed Rate Z-Axis: Not specified
X-Axis: 314.9"
Control Voltage: Not specified
Max Torque: Not specified
Operating Mode: Not specified
Tool Length Max.: 11.81"
Feed Rate X-, Y-Axis: Not specified
Overall Length: Not specified
Nominal Swivel Torque Simultaneously: Not specified
Max Load On Table: Not specified
Max. Table Load: 11,000 lbs.
Milling Head Swivable B: Not specified
Automatic Tool Changer: 50
Table Width: Not specified
Holding Torque Clamped: Not specified
Z-Axis: 98.42"
Travel-Cross: Not specified
A-Axis Swivel Range: 110° +/-
X Axis: 314.9"
Y-Axis Travel: 137.79"
Feed Linear Axes: Not specified
Total Weight: Not specified
Z-Axis Travel: 98.42"
Feed Rate X, Y, Z-Axis: Not specified
Between Columns: Not specified
Max Speed: Not specified
Table Capacity: Not specified
X-Axis Travel: 314.9"
Acceleration Max: Not specified
Coolant Supply: High Pressure Through Spindle Coolant System
Y Axis Travel: 137.79"
Travel Distance X Axis: Not specified
Reduced Feed Setup Mode: Not specified
X Axis Travel: Not specified
Cross: Not specified
Accuracy (Positioning): Not specified
Machine Width: Not specified
Axis Acceleration X, Y, Z-Axis: Not specified
Rapid Traverse (X/Y/Z): Not specified
Swiveling Axis A: 110° +/-
Feed Rate (X/Y/Z): Not specified
Coolant System: High Pressure Through Spindle Coolant System
Feed Speed Z Axis: Not specified
Control: Not specified
C-Axis: 360° +/-
Machine Weight (Approximate): Not specified
Table Length: Not specified
Z Axis Travel: 98.42"
Gantry Travel: Not specified
A-Axis: Not specified
Vertical: Not specified
Machine Height: Not specified
Machine Dimensions: Not specified
Feed Speed: Not specified
Overall Height: Not specified
Length X Width X Height: Not specified
C Axis Swivel Speed: Not specified
Back Up Fuse: Not specified
Overall Width: Not specified
Spindle Motor Power: 60 HP / 45 kW
Travel-Long: Not specified
Feed Speed X Axis: Not specified
Weight: Not specified
Turning Axis C: 360° +/-
Short-Circuit Strength: Not specified
Reduced Milling Spindle Speed Setup Mode: Not specified
Tool Holder: Not specified
Frequency: Not specified
Machine Weight: Not specified
Tool Holder Type: Not specified
Repeatability: Not specified
Longitudinal: Not specified
Milling Head Swivable A: Not specified
Tool Weight Max.: 17.6 lbs
Equipped With: HEIDENHAIN iTNC 530 CNC Controls
Other: High Speed Gantry Style 2-Axis Nutating VH20 Milling Head
Other: High Pressure Through Spindle Coolant System
Other: Full Enclosure, Closed Cabin
Other: Workpiece Sensor
Other: Central Lubrication System
Other: SIEMENS WEISS watercooled
Other: Vibration Sensor
Other: Dynamic Collision Warning
Other: Infrared Measuring
Other: Renishaw RMP 60 Toolsetter
Other: BLUM Control NT-Micro
Machine hours: 84.951

Do you have a Zimmermann FZ 37 to sell?

We are actively seeking a 2014 Zimmermann FZ 37 for our growing inventory of pre-owned cnc gantry & portal mills equipment. Superior Machine Tools purchases CNC machinery directly from sellers across the United States, and Zimmermann models like the FZ 37 are exactly the kind of well-maintained equipment our buyers are looking for. Notable specifications include spindle power of 60 HP / 45 kW, travel distance z axis of 98.42", ram stroke z-axis of 98.42", and taper of HSK A63. Selling a used Zimmermann FZ 37 doesn't have to be complicated.

We pay fair market value based on current demand for Zimmermann cnc gantry & portal mills equipment, and we close transactions quickly - often within days of an initial inquiry. There is no need to coordinate buyers, list on multiple marketplaces, or negotiate piecemeal. We make a single offer that reflects the current value of your machine. Once an offer is accepted, our logistics team handles the rest.

We arrange professional rigging and removal, manage all transportation, and ensure the Zimmermann FZ 37 is moved off your floor with minimal disruption to your operations. Whether you are upgrading to newer equipment, consolidating a facility, or liquidating an entire shop, we have the experience to make the process simple. If you have a 2014 Zimmermann FZ 37 you are considering selling, contact Superior Machine Tools today for a fast, no-obligation quote. We respond promptly, pay competitively, and remove the equipment on a timeline that works for you.