Sell your Mazak MULTIPLEX 620 MARK II 1996 today.
Mazak MULTIPLEX 620 MARK II Specifications
| Total Power Required (Machine Only) | 22 kW |
|---|---|
| Rapid Traverse X | 9.45 inches |
| Rapid Traverse Z | 19.49 inches |
| Max Cutting Length | 7.09 inches |
| Maximum Part Load | 661.39 lbs |
| X-Axis Travel | 9.45 inches |
| Turrets #1 & #2 | 2 |
| Horsepower Of Rotary Head | 22 kW |
| Machine Dimensions Lxwxh | Not available |
| Main Spindle Bore | 2.4 inches |
| Z- Axis (Upper Turret) | 19.49 inches |
| Spindle Torque | Not available |
| Rotary Tool Motor Horsepower | Not available |
| Maximum Workpiece Weight (Chucked) | 661.39 lbs |
| Spindle Bore Diameter 2 | Not available |
| Spindle Speed #2 | 5000 rpm |
| Max Diameter Bar Capacity | Not available |
| Z – Axis | 19.49 inches |
| Gantry Dimensions | Not available |
| Boring Bar Shank Diameter | Not available |
| Maximum Drill | Not available |
| Coolant Tank Capacity | Not available |
| Max. Work Weight | 661.39 lbs |
| Cutting Diameter | 12.6 inches |
| Spindle Bar Capacity | Not available |
| Sub Spindle RPM | Not available |
| X/X2 Rapid Traverse | Not available |
| B - Axis Coupling Clamp | Not available |
| Tailstock Quil Travel | Not available |
| Approximate Machine Weight | Not available |
| Chuck Quantity | Not available |
| X5Th Axis | Not available |
| Distance | Not available |
| Turret To Spindle Face | Not available |
| C - Axis Indexing | Not available |
| Rapid Traverse Rate X-Y-Z | Not available |
| Auto Tool Presetter | Not available |
| Hydraulic Steady Rest Capacity | Not available |
| Milling Capacity | Not available |
| Coolant Pressure | Not available |
| Tail Stock Diameter | Not available |
| Turret Tool Positions 1, 2, 3 | Not available |
| Mist Collector | Not available |
| Rotary Motor | Not available |
| C - Axis Travel | Not available |
| Automatic Tool Changer Capacity | Not available |
| W - Axis | Not available |
| Max. Spindle Torque | Not available |
| Nbr Of Spindles | Not available |
| Spindle Travel | Not available |
| First Spindle Chuck Size | Not available |
| Max. Boring Bar Diameter | Not available |
| Coolant Tank Dimensions | Not available |
| Tailstock Body Stroke | Not available |
| Z-Axis Travels | Not available |
| Min. Spindle N/C Contouring | Not available |
| Center Height | Not available |
| Travel Z-Axis | Not available |
| Max RPM (Milling Tool) | Not available |
| Rapid Traverse Rate X & Z | Not available |
| Swing Over Bed Ways | Not available |
| Maximum Bar Work Diameter | Not available |
| Rapid Traverse Rate Z- Axis | Not available |
| Turret Rotary Tool Speeds 1 | Not available |
| Min. Spindle Indexing (Main Spindle Only) | Not available |
| Sub Spindle Rapids | Not available |
| Max Swing Over Cross Slide | Not available |
| Mill Spindle Speed | Not available |
| Tailstock Spindle Center / Spindle Diameter | Not available |
| C Axis Travel | Not available |
| Max. Tailstock Travel | Not available |
| Steady Rest | Not available |
| Tool Holder Type | Not available |
| Vector Dual Drive | Not available |
| 29.5 In Max. Cutting Diameter | Not available |
| Weight | Not available |
| Number Of Spindle | Not available |
| Between Centers | 46.85 inches |
| Automation | Not available |
| Mfr | Not available |
| Y Stroke | Not available |
| X2- Axis Travel (Lower Turret) | Not available |
| Spindle Horsepower (Cont/30 Mins.) | Not available |
| Above Transversing Slide | Not available |
| Tailstock Stroke | Not available |
| Assorted Tooling | Not available |
| Sub Spindle | Not available |
| Max Milling Spindle Speed (Hi-Torque) | Not available |
| Rapid Traverse ( X/Z ) | Not available |
| Additional Machine Specs | Not available |
| Sub-Spindle Horsepower | Not available |
| Max. Spindle Bar Capacity | Not available |
| Chuck Size (Main) | Not available |
| Spindle | Not available |
| Main Spindle Speed Range | Not available |
| Second Spindle Nose | Not available |
| Swing | Not available |
| Rapid Traverse S | Not available |
| Longitudinal Feed Range | Not available |
| X2Nd Turret Positions | Not available |
| Second Turret | Not available |
| Multi-Tasking | Not available |
| Maximum Work Weight | 661.39 lbs |
| Machining Diameter | Not available |
| Maximum Cutting Diameter (Lower Turret) | Not available |
| Vertical Rail Travel (W-Axis) | Not available |
| Rapid Traverse Z – Axis | Not available |
| Pallet-L | Not available |
| Maximum Cuttin Dia. Chucking/Shaft | Not available |
| C - Axis Travel Main Spindle | Not available |
| Maximum Weight W | Not available |
| X- Axis Thrust | Not available |
| Tailstock Quill | Not available |
| C-Axis Travel | Not available |
| Control System | Not available |
| Nc Position Table | Not available |
| Max. Cutting Diameter(Bar Work) | Not available |
| Main Spindle Torque | Not available |
| Max. Thrust Force | Not available |
| Dia. | Not available |
| X2 - Travel | Not available |
| Number Of Tool Turrets | Not available |
| Swing Over Carrriage | Not available |
| B - Axis Coupling | Not available |
| Atc For Milling Spindle | Not available |
| Maximum Speed | Not available |
| Type Of Cone | Not available |
| Spindle Bore Sub Spindle | Not available |
| B Axis Increment | Not available |
| Floor Space | Not available |
| Rapid Feed Rate | Not available |
| Makimum Cutting Diameter | Not available |
| Rapid Traverse Z | Not available |
| Chuck Sizes Main Subspindle | Not available |
| Square Tool Shank Size | Not available |
| C - Axis Rapid Traverse | Not available |
| Tail Stock Travel | Not available |
| Through Hole | Not available |
| Z Axis Travel | Not available |
| Number Of Fixed Tool Holders | Not available |
| Spindle Nose Camlock | Not available |
| Main Spindle Drive Motor | Not available |
| Maximum Distance Between Centers | Not available |
| Spindle Horsepower 1 | Not available |
| Mill Spindle Torque (2000 RPM Option) | Not available |
| X Travel | Not available |
| Tailstock Quill Travel | Not available |
| Rapid Traverse Y Axis | Not available |
| Machine Weight | Not available |
| Rapid Traverse Rate X/Z | Not available |
| Swing Over Slide | Not available |
| Longitudinal Feeds Range | Not available |
| Stroke X | Not available |
| Distance Between Spindle Faces (Min.) | Not available |
| Tool Size (Square Shank) | Not available |
| Spindle Nose Main Spindle | Not available |
| Z-Axis Stroke | Not available |
| Lower Turret Live Tool Positions | Not available |
| Capacity Maximum Swing | Not available |
| Rapid Traverse Rate B | Not available |
| C, C-Axis (Indexing Pos. | Not available |
| Second Spindle Chuck Size | Not available |
| Safety Features | Not available |
| Live Tooling Motor | Not available |
| Spindle Center Height | Not available |
| X-Axis Movement | Not available |
| No. Axis | Not available |
| C2-Axis Positioning | Not available |
| C-Axis Rotation | Not available |
| Spindle Horsepower (Cont/30 Mins) | Not available |
| Turret Configuration 2 | Not available |
| Rapid Traverse Rate- X2 | Not available |
| Z - Axis Travel 1, 2 | Not available |
| Spindle Nose 1, 2 | Not available |
| Atc | Not available |
| Bar Capacity Head 1, Head 2 | Not available |
| Rapid Traverse Rate (X-Axis) | Not available |
| Maximum Bar Work | Not available |
| Turret Configuration 1, 2 | Not available |
| Second Headstock Rapid Traverse Rate | Not available |
| Crimping Range | Not available |
| Spindle Horsepower 2 | Not available |
| Spindle Motor Sub | Not available |
| Second Chuck Spindle Speed | Not available |
| Rapid Traverse Rates X, Z/Y/B | Not available |
| Max. Machining Diameter Upper/Lower Turret | Not available |
| Voltage | Not available |
| Conveyor | Not available |
| Twin Turret | Not available |
| X-Axis (Cross Travel | Not available |
| Tool Magazine Indexing Time | Not available |
| Included | Not available |
| Rapid Traverse (Z-Axis) | Not available |
| Y Axis | Not available |
| Rapid Traverse Rates X, Z, B | Not available |
| Boring Bar | Not available |
| Maximum Distance Between Spindles | Not available |
| Approximate Floor Space | Not available |
| Spindle Indexing Increments | Not available |
| Spindle Nose Main | Not available |
| Live Tool Speed | Not available |
| Rapid Traverse X,Z,B | Not available |
| Max. Machining Diameter Upper | Not available |
| Tool Size Milling (Drill/End Mill/Tap) | Not available |
| Inch Threading Range | Not available |
| Sub-Spindle Speeds | Not available |
| Feed Rates X/Z | Not available |
| B-Axis Milling Spindle Horsepower | Not available |
| Electrics | Not available |
| Z-Axis Travel | 19.49 inches |
| Turrets #1 | 2 |
| Rapid Traverse Rates | Not available |
| Spindle Speed (Mill) | 5000 rpm |
| X2-Axis Travel (Lower Turret) | Not available |
| Number Of Turrets / Capacity | 2 |
| Spindle Bearing Id | Not available |
| Tool Storage Capacity | Not available |
| Travels | Not available |
| Controller | Not available |
| Rapid Traverse Y | Not available |
| Max Milling Spindle Speed | Not available |
| Tail Stock Quill Diameter | Not available |
| Turrets | Not available |
| Maximum Cutting Capacity Kn/Lbf | Not available |
| Max Machining Length | Not available |
| B - Axis (Tailstock) | Not available |
| Stroke Of Turret | Not available |
Do you have a Mazak MULTIPLEX 620 MARK II to sell?
<p>We are actively seeking a 1996 Mazak MULTIPLEX 620 MARK II CNC Lathe. This high-performance machine is designed for precision metal cutting, featuring a robust turning diameter of 12.6 inches and a turning length of 7.09 inches, making it an ideal choice for a variety of machining applications. With a maximum workpiece weight capacity of 661.39 lbs, this lathe is well-suited for handling substantial components while maintaining accuracy and efficiency.</p> <p>The MULTIPLEX 620 MARK II boasts impressive specifications, including X-axis travel of 9.45 inches and Z-axis travel of 19.49 inches, allowing for versatile machining operations.
It is equipped with two turrets, each capable of holding 12 tools, enabling quick tool changes and enhanced productivity. The spindle bore measures 2.4 inches, and the machine operates at a turning speed of up to 5000 rpm, powered by a 22 kW spindle motor, ensuring optimal performance for a wide range of materials and applications.</p> <p>Sellers often part with machines like the Mazak MULTIPLEX 620 MARK II due to various reasons such as upgrading to newer models, downsizing operations, or facility closures. At Superior Machine Tools, we understand the importance of a seamless transition and are committed to buying machines nationwide, providing sellers with a hassle-free experience while ensuring their equipment finds a new home where it can continue to deliver value.</p> <p>We offer fast payments and handle all logistics involved in the sale, making it easy for you to sell your CNC machine.
If you have a Mazak MULTIPLEX 620 MARK II or similar equipment to sell, we invite you to reach out to us today for a quick and straightforward transaction.</p>
Frequently Asked Questions
What types of machinery and equipment do you purchase?
MTE buys a wide range of used and surplus machinery, including CNC machines, metalworking and fabrication equipment, industrial robots, inspection and testing systems, and material handling assets from industries such as metals manufacturing, oil and gas, automotive, and mining.
How does MTE assess the value of my surplus equipment?
Our team conducts a thorough review using current market data, equipment specifications, age, and condition. We provide fair market valuations given your specific situation to ensure you receive maximum value for your assets.
What is the process for selling my excess machinery to MTE?
We make it simple: contact us with asset details, and our specialists will review and coordinate an inspection if needed. After finalizing terms, we handle all logistics, removal, and payment for a smooth and efficient transaction.
How quickly can MTE complete the purchase and removal of my surplus equipment?
MTE prioritizes safe and efficient equipment removal, adhering to your company's specific requirements and timeframes. We coordinate all logistics to ensure the process is carried out safely and efficiently, minimizing risks and protecting both personnel and equipment.
What documentation is required to sell my used machinery?
We typically request detailed equipment information, such as make, model, year, and maintenance records, along with proof of ownership. Our team will guide you through all necessary paperwork to ensure a secure and transparent transaction.
Where is MTE located, and do you offer services outside Michigan?
While MTE is proudly based in Michigan, our services extend across the entire United States and internationally. No matter where your surplus machinery or equipment is located, our team has the experience and logistics capabilities to manage evaluations, purchases, and removals efficiently.
Is MTE an equipment broker?
No. Our business model is based on purchasing equipment outright — MTE does not act as a broker nor do we buy on consignment. We buy machinery and assets upfront, providing immediate payment and a straightforward transaction.
Related Machines
“Selling my CNC machine with MTE was seamless. The team guided me through every step and offered a fair price quickly.”
Michael Rodriguez
Plant Operations Manager
Have one to sell?
MTE is the direct buyer. Quote in 24-48 hours, free pickup, pay on collection.