Used Grob Machines We Buy

We buy used Grob machines straight from the shops that own them. Two makers share the name: GROB-WERKE of Germany builds the G-series machining centers, and Grob Inc. of Grafton, Wisconsin, the 4V vertical band saws.

  • 24–48hQuote turnaround
  • Since 2012Buying machines
  • DirectNot a broker
A manufacturing plant floor with machinery, seen from above
Quote in 24–48 hrsFrom the buyer, not a broker
Buying since 2012Outright purchases only

How Selling Your Grob Works

  1. Send us the plate details

    For a GROB machining center, give us the model (G350, G550, G750 and so on), the GROB machine number from the plate, and whether it runs a Siemens or a Heidenhain control. For a Grob band saw, the model on the plate, such as a 4V-18 or 4V-24, is usually enough to start. Hours, tooling and any pallet storage help but are optional.

  2. Hear back within 24-48 hours

    We look at what comparable universals or vertical saws are trading for and send you a cash offer, usually inside 24 to 48 hours. You are under no obligation to take it.

  3. We can arrange the move

    Once you accept, we can arrange the rigging, crating, freight and pickup, whether the job is a lone saw in a tool room or a G550 with a pallet storage system bolted to it.

Two Companies Share the Grob Name

The machines listed under Grob come from two different makers, and this page treats them separately. The G-series machining centers are built by GROB-WERKE GmbH & Co. KG, a family-owned German machine builder founded in Munich in 1926. The vertical band saws, the 4V models among them, are built by Grob Inc., a family-owned company in Grafton, Wisconsin, that dates its own start to 1929, when Ben and Ted Grob founded Grob Brothers.

Grob Inc. says the brothers went separate ways in 1951 and that Ben, staying with band saws, formed Grob Inc. None of the company pages we read on either site describes a tie to the other, so we read the data plate before we read the name.

GROB-WERKE: Munich Roots, Mindelheim Headquarters

Ernst Grob founded the Ernst Grob Tool and Machine Factory in Munich on May 21, 1926. When the Munich works had no room left to grow, Burkhart Grob bought land in Mindelheim in 1967, and the Mindelheim plant, opened in 1968, has been the group's headquarters ever since.

GROB says it now owns six large production plants across four continents: Mindelheim, São Paulo, Bluffton in Ohio, Dalian in China, Pianezza in Italy and Bangalore in India. The US side began in 1983, when GROB Systems Inc. was founded in Bluffton as a sales and service subsidiary; in 1991 Bluffton became GROB's third production plant. GROB says that plant builds universal machining centers alongside its machining technology machines, so a G-series in an American shop can be German or Ohio work.

GROB's Universal Line, Its Spindle Layout and Its Controls

GROB points to a horizontally mounted spindle as the signature of its machines, for stability and chip removal. On the G550 it describes three linear and two rotary axes, with a swivel range of 230 degrees in the A-axis and 360 degrees in the B-axis, so the part can be machined on five sides or in simultaneous 5-axis work.

The universal family on GROB's site runs G150, G350, G550 and G750, the economy-minded access versions G350a and G550a, and the mill-turn G350T, G550T and G750T. GROB's operator panel, GROB 4 Pilot, is offered for two control systems, the Siemens 840D sl and the Heidenhain TNC 640, so a G-series universal can carry either one.

The G300, G500 and G520 belong to a separate GROB line, the G-modules: modular machining centers that GROB builds for automotive series production, in single- and two-spindle versions.

GROB Machining Centers by Year Introduced

GROB's own technology timeline, which runs to 2025, dates its machining-center launches. Before the G names, GROB's centers carried BZ names, such as the BZ600L of 1998, its first with linear motor drives.

MachineWhen GROB introduced it
G-series modular machining centers (G-modules)2004
G350, 5-axis universal2007, shown at the EMO trade fair in Hanover
G550, 5-axis universal2009, presented to the trade press
G550T, 5-axis mill-turn2011, shown at EMO in Hanover
G750, 5-axis universal2013, shown at EMO in Hanover
G350a and G550a, the access series2019
G150, the smallest GROB 5-axis universal2020
G440, G640 and G840 4-axis milling centers2021, the year GROB also showed the G750 Generation 2

From GROB's Technological Milestones page. GROB dates its first thread milling machine to 1933.

Grob Inc. Band Saws from Grafton, Wisconsin

Grob Inc. says it employs more than 60 technicians and engineers at a 100,000 square foot plant and headquarters in Grafton, Wisconsin, and that its band saws are 100% manufactured in the USA. Its current saw line is the 4V-24, the 4V-36 and the 6V-36, each built around a Grob transmission with cold-rolled gears and splines. Cold forming, which the company calls Grob Rolling, is the other half of its business.

The 4V-18 is no longer in that current line, but Grob Inc. still posts its assembly drawings and e-manual beside the current models. The older NS saws do not appear on Grob Inc.'s current pages at all.

GROB Service and Trade-In, or Selling Outright

GROB runs its own used-machine desk. Its trade-in and buy-back page invites owners to trade in a used 5-axis machining center for one of its latest universal machines, and it also asks owners who simply want to sell to get in touch; the form asks for the GROB machine number. GROB's service side offers a motorized spindle service with replacement spindles and partial repairs, plus overhaul and modernization of existing GROB machines.

For an owner who wants a G-series off the floor without placing a new order, we buy it outright. A spindle swap or a factory overhaul on record is worth telling us about, and the GROB machine number speeds up our check of the build.

What Sets the Offer on a Used Grob

Two things carry most of the weight on a G-series universal: the control generation, and whether the machine still holds tolerance after its hours. GROB offers its universals with a Siemens 840D sl or a Heidenhain TNC 640 control, and a current control reads differently than an older screen a shop can no longer get service parts for. Spindle hours, the pallet and automation package, and whether tooling comes with the machine all move the number as well. Jason Puuri weighs hours and condition himself rather than running a formula, which is part of why there is no blanket Grob number on this page: Grob model numbers run from the G150 to the G840, with T, A and HMC variants on top, so a per-brand average would tell you nothing about yours. A saw gets scoped on completely different terms, and a G550 conversation and a 4V-18 conversation share almost nothing but the nameplate.

The G-Series Universals: G550, G350 and the Rest

On the machining-center side, the G550 and the G350 are Grob universals that are common on the used market. GROB's own 5-axis universal line is the G150, G350, G550 and G750 family, and its G-modules include the G500 and G520. Other G-series numbers we buy include the G552, G440, G350T, G840, G326, G640, G550T, G550A, G350A and G750T. Suffixes are not cosmetic, so a G550 and a G550T get scoped individually rather than lumped under one family number. GROB builds its universals around a horizontal spindle. We buy the G350, G550 and G750 universals, the G500 and G520 G-modules, the G-series HMC variants and G-series automation cells.

Grob Saws: the 4V, NS and FAB Lines

The G-series gets the attention, but Grob Inc.'s 4V vertical band saws, the 4V-18, 4V-24 and 4V-36 among them, are common on the used market too. We also buy the older NS saws, such as the NS-18, NS-24 and NS-36, the FAB-18 and FAB-30, and the 6V-36. On a saw, send the data plate model number, the blade wheel size and whether it still runs under power. These trade on their own terms, not on control generation or spindle hours.

Grob Machines Outside the G-Series and the Saws

Not every Grob is a G-series universal or a band saw. We also buy Grob-named horizontal boring mills, lathes, grinding machines, turning centers, transfer machines and gear machinery, along with oddities like the 2S36U, the BZ 600, the ZRM9 and a 352 5-Axis. A general label such as metal cutting says nothing about what the machine actually is, so the model number and a few photos decide how we scope it. The payoff for a seller: if your Grob is not a G-series universal, it still belongs on this page, and we still buy it.

Selling Outright Instead of Trading In

GROB runs its own buy-back desk, which takes used 5-axis machining centers in trade toward its latest universals. If you simply want the old one off the floor, MTE buys it outright with no new-machine purchase attached. We are a direct buyer, not a broker, a listing service or an auction platform, so you are selling to us rather than waiting on us to find a third party. MTE is a division of Superior Machine and Tool and has been buying and selling used CNC equipment since 2012. We can arrange rigging, crating and freight, arrange the pickup, and buy in all 50 states in any condition, whether the machine is running production, sitting idle or needing work. A single G350 and a full production cell of G-series universals get the same terms, and each unit in a multi-machine pull still gets scoped on its own control, hours and condition.

Have This Ready Before You Call, Whatever the Vintage

Model plate number, year, spindle hours if tracked, condition, tooling and automation, and control type are enough to start. Photos of the control screen and the work envelope speed a first number but are not required. On an older saw the data plate model number is usually enough on its own, since there is no control generation to ask about. Factory documentation on the oldest Grob machines is thin, so a photo showing the footprint and how the machine sits in the shop does more for the rigging plan than a catalog spec would. If your model does not appear anywhere on this page, send it anyway. We buy both makers' Grob machines, the G-series and the saws, and a number typically comes back within 24 to 48 hours.

Ready to sell your machine? Tell us what you have and get a competitive offer in 24-48 hours. We can arrange the removal, rigging and logistics, and the truck to move it.

Machine Tool ExchangeNationwide CNC machine buyer since 2012

Cash Out Your Used Machines
  • 24-48h quote
  • Coast-to-coast

Customer Reviews

Industrial machineryIndustrial machineryIndustrial machinery

Superior Machine & Tool completed the removal of all our equipment precisely according to our timeline and specifications. Their professionalism and reliability made them a pleasure to work with, and we highly recommend their services.

MTE CustomerEquipment Seller

Closing down our facility was stressful, but these folks made selling our surplus equipment fast and easy. Their team handled payment right away and coordinated removal like pros.

MTE CustomerEquipment Seller

We had a deadline for our asset removal, and they removed everything safely and finished ahead of schedule. The whole process was seamless and stress-free.

MTE CustomerEquipment Seller

These guys made the whole process so easy. I got paid fast, and they picked up the equipment right on time.

MTE CustomerEquipment Seller

Common questions

How do I sell a used Grob machine?

Send the model, year, spindle hours, condition, control type and any tooling included. We evaluate it, send an offer, then arrange rigging, freight and the pickup.

Does Grob buy back used machines?

GROB buys back used 5-axis machining centers, mostly as trade-ins toward its newest universals. MTE buys your used Grob outright, with no new-machine purchase attached.

Who buys used Grob machines?

Machine Tool Exchange, a division of Superior Machine and Tool since 2012, buys them directly. We are not a listing service or an auction platform.

What is my used Grob machine worth?

It turns on model, year, spindle hours, condition, control generation and automation package. A band saw is scoped on different terms than a universal. Send the details and we will price it.

Do you buy Grob machines with Siemens Sinumerik controls?

Yes, including 840D sl machines, where control generation carries real weight, and GROB universals built with a Heidenhain TNC 640 instead. The 4V and NS band saws here predate those controls entirely, and we buy those too.

My Grob is not a G-series machining center. Do you still buy it?

Yes. We buy Grob machines well past the G-series: 4V and NS band saws, horizontal boring mills, lathes and grinding machines. We buy both makers' lines, GROB-WERKE's and Grob Inc.'s.

Can you arrange rigging, freight and the pickup?

Yes. MTE can arrange rigging, crating, freight and the pickup in all 50 states.

Where are GROB machines made?

GROB-WERKE, the German maker of the G-series machining centers, has its headquarters plant in Mindelheim, Bavaria, opened in 1968, and runs production plants in São Paulo, Bluffton (Ohio), Dalian, Pianezza and Bangalore. Its Bluffton plant became a production site in 1991 and builds universal machining centers among other machines. The Grob band saws are a different story: Grob Inc. builds those in Grafton, Wisconsin.

Is Grob a manufacturer?

Yes, and two separate manufacturers use the name. GROB-WERKE, founded by Ernst Grob in Munich on May 21, 1926, builds machining centers and production systems. Grob Inc. of Grafton, Wisconsin, traces itself to the Grob Brothers shop that Ben and Ted Grob started in 1929 and builds vertical band saws. The two companies' own history pages do not mention each other.

What control does a GROB G550 use?

GROB sells the G550 with its own GROB 4 Pilot operator panel, which GROB offers for two control systems: the Siemens 840D sl and the Heidenhain TNC 640. So a G550 is not always a Siemens machine. Tell us which control is on yours, because the two do not trade as one.

Is the GROB G500 a universal machining center?

No. GROB files the G500, with the G300 and G520, under its G-modules: modular machining centers for automotive series production, offered with one or two spindles. The 5-axis universal line is the G150, G350, G550 and G750 family. GROB introduced the modular G-series in 2004 and presented development stage 7 of the G300 and G500 in 2021.

What does GROB stand for?

GROB is a family name. GROB-WERKE carries the name of Ernst Grob, who founded the Ernst Grob Tool and Machine Factory in Munich on May 21, 1926, and the company has stayed family-owned ever since. In its first few years it built folding boats, and its first thread-cutting machines followed in 1933. Grob Inc., the band saw maker in Grafton, Wisconsin, traces its name to Ben and Ted Grob, who started their saw business in 1929.

What does GROB do?

GROB-WERKE builds production and automation systems. Its range covers 4-axis and 5-axis machining centers, 5-axis mill-turn centers, complete assembly lines and assembly stations for the automotive industry, and e-mobility systems for electric motors, battery modules and fuel cells. GROB says it employs 9,600 people worldwide and produces several thousand machining centers and automation systems each year. For a seller, only one of those machines matters, so we price the G-series on your floor by its own plate, control and hours.

What are the specifications of the G550 machining center?

GROB's G550 page lists working travels of 800 mm in X, 1,020 mm in Y and 970 mm in Z, a 770 mm table that carries 700 kg with a pallet or 800 kg without one, and a chip-to-chip time of 2.8 seconds, with HSK-A63 tools in a single or double disk-type magazine. Three linear and two rotary axes give a swivel range of 230 degrees in A and 360 degrees in B. Builds differ in their magazine and pallet changer, so send the GROB machine number with yours.

How much is a Grob G550?

GROB's own G550 page gives no price; it asks buyers to select the specifications they want and request an offer. A used G550 is priced by its build in much the same way: whether it carries the Siemens 840D sl or the Heidenhain TNC 640, whether a pallet changer came with it, whether the tool magazine has one disk or two, and its hours and condition. Send us the GROB machine number with those details and we put a number on yours.

Thinking about selling Grob Machines?

A G550 five-axis universal and a 4V-18 band saw are two different conversations, and this page has now covered both. Whichever one is on your floor, Jason Puuri scopes it himself on control, hours and condition instead of running a formula, and a number typically comes back within 24 to 48 hours. Call 517-514-5190 or send the details through the offer form at /sell-your-cnc-machine/. No listing, and the offer comes directly from us.

  • Fast Response
  • Fair Offers
  • Hassle-Free Process

Tell us what you’re selling

Send us the make and model and we’ll come back with a cash offer. Most sellers hear from us the same business day.

What happens next

  1. Same business dayWe confirm your details and ask anything we’re missing.
  2. Within 24–48 hoursYou receive a purchase proposal.
  3. On your timelineSigned agreement, then we can arrange rigging & pickup.

We only use your details to value your machine and get back to you. No lists, no resale.