Direct procurement

Sell your Gleason 512 HYPOID TESTER today.

MTE does not act as a broker, nor do we buy on consignment. We buy machinery and assets outright and arrange the pickup.

Make: Gleason
Model: 512 HYPOID TESTER
Category: CNC Gear Machinery
Condition: Used / Surplus

Jason PuuriOwner, Superior Machine & Tool, Inc.Message From MTE Owner

Jason sets final pricing on the machines MTE buys.

Gleason 512 HYPOID TESTER Specifications

Approx Net Weight: 0
Approximate Dimensions: 0
Arbor Diameter: 0
Bore: 0
Brake Spindle Bore Large End: 3-29/32"
Brake Spindle Bore Taper Per Ft: 39/64"
Capacity: 0
Center Distance: 0
Chuck Speed: 0
Diameter Cutters: 0
Maximum Normal Module: 0
Maximum Spindle Speed: 0
Cutter Spindle Diameter: 0
Other: Chip Conveyor
Other: Calibration Spheres
Other: Control System
Other: Control Type
Other: Control Voltage
Other: Coolant System
Other: Column, Maximum Axial Travel
Other: Cutter Arbor Cone
Other: Cutter Diameter
Other: Cutter Length Max
Other: Maximum Cutter Speed
Other: Stroke Rate Range
Other: Cutter Speeds
Other: Gear outside diameter (maximum): 508mm
Other: Pinion outside diameter (maximum): 254mm
Other: Offset of pinion spindle L or R of gear spindle center (max): 101.6mm
Other: Diameter of taper hole at large end (Pinion spindle): 3-29/32"
Other: Taper per foot (Pinion spindle): 39/64"
Other: Depth of taper (Pinion spindle): 3"
Other: Diameter of hole at small end (Pinion spindle): 3.740"
Other: Depth of hole at small end from face of spindle (Pinion spindle): 15.5"
Other: Diameter of taper hole at large end (Gear spindle - Standard): 2-19/64"
Other: Diameter of taper hole at large end (Gear spindle - Large Bore): 3-29/32"
Other: Taper per foot (Gear spindle - Standard): 1/2"
Other: Taper per foot (Gear spindle - Large Bore): 39/64"
Other: Depth of taper (Gear spindle - Standard): 3"
Other: Depth of taper (Gear spindle - Large Bore): 3"
Other: Depth of hole at small end (Gear spindle - Standard): 2.168"
Other: Depth of hole at small end (Gear spindle - Large Bore): 3.740"
Other: Depth of hole at small end from face of spindle (Gear spindle - Standard): 8"
Other: Depth of hole at small end from face of spindle (Gear spindle - Large Bore): 7"

Do you have a Gleason 512 HYPOID TESTER to sell?

We are actively seeking a GLEASON 512 HYPOID TESTER, a renowned gear inspection machine that can significantly enhance your shop's capabilities. This model is designed for precise gear testing, making it an essential asset for any facility involved in gear manufacturing or inspection. With a maximum gear outside diameter of 508mm and a maximum pinion outside diameter of 254mm, the 512 HYPOID TESTER is equipped to handle a variety of gear sizes. The offset of the pinion spindle allows for adjustments up to 101.6mm from the gear spindle center, providing flexibility for different testing scenarios. The specifications of this machine are impressive.

The pinion spindle features a taper hole at the large end measuring 3-29/32" with a taper of 39/64" per foot and a depth of taper reaching 3". Additionally, the small end has a diameter of 3.740" and a depth from the face of the spindle of 15.5". The gear spindle, on the other hand, offers two options: a standard bore taper hole at the large end measuring 2-19/64" and a large bore taper hole at 3-29/32". Both options maintain a depth of taper of 3" and provide the necessary precision for rigorous testing. We understand that many sellers choose to part with their machines for various reasons, such as upgrading to newer technology, downsizing operations, or even closing a facility.

Whatever the reason, we are here to help you navigate the selling process smoothly. We buy nationwide, so no matter where you are located, we can arrange for the pickup and transportation of your machine. If you have a GLEASON 512 HYPOID TESTER or similar equipment that you are considering selling, we encourage you to reach out to us. Let us take the burden off your hands, and turn your unused machinery into cash today.