Direct procurement

Sell your Gleason 108 HYPOID GEAR GENERATOR today.

MTE does not act as a broker, nor do we buy on consignment. We buy machinery and assets outright and arrange the pickup.

Make: Gleason
Model: 108 HYPOID GEAR GENERATOR
Category: CNC Gear Machinery
Condition: Used / Surplus

Jason PuuriOwner, Superior Machine & Tool, Inc.Message From MTE Owner

Jason sets final pricing on the machines MTE buys.

Gleason 108 HYPOID GEAR GENERATOR Specifications

Maximum Normal Module: 6.34 mod
Center Distance: 5¼” 133 mm
AAxis Work Spindle Face Hobbing RPM: 74 to 380
A Work Spindle: Diameter of taper hole at large end: 3.29/32” 100 mm
A Work Spindle: Taper per foot: 39/64” 15 mm
A Work Spindle: Depth of taper: 6” 150 mm
A Work Spindle: Diameter of hole through spindle: 2.7/16” 62 mm
Cutter Diameter: 3½”, 6” and 7½”: 89 mm, 150 mm and 190 mm
Cutter Speeds: 74 to 380
Cutter Speeds: 22.5 to 115.3 meters per minute
Feeds: 3 to 68.6
Main Motor: 3 Hp 1800 RPM
Hydraulic Motor: ¾ Hp 1800 RPM
Coolant Motor: ½ Hp 3600 RPM
Approx Net Weight: 16000 lbs 7800 kgs
Approximate Dimensions: 62 x 85” 1600 x 2200 mm
Other: Number of teeth: 5 to 97 and most numbers up to 175
Other: Extreme ratio: any practical ratio
Other: Minimum ratio for pinions to operate with formate gears: 2 to 1
Other: Maximum gear pitch dia (30° spiral angle) * 10 to 1 ratio: 8½” 216 mm, 2 to 1 ratio: 7½” 190 mm, 1 to 1 ratio: 6” 152 mm
Other: Face width maximum: 1¼” 32 mm
Other: Chuck Speed:
Other: Calibration Spheres:
Other: Column:
Other: Control System:
Other: Control Type:
Other: Control Unit:
Other: Control Voltage:
Other: Coolant System:
Other: Chip Conveyor:
Other: Clamping System:
Other: Arbor Diameter:
Other: Axial Z Axis:
Other: Axial Cross Angle:
Other: Axial Rapid Travel:
Other: Axial Slide Travel:
Other: Axial Travel:
Other: Axis:
Other: Axis Speed X:
Other: Axis Speed Y:
Other: Axis Speed Z:
Other: B Axis:
Other: B Axis Swivelling Axis:
Other: B Axis Swinging Base Ac Servo:
Other: B Axis Swinging Base Degrees Per Second:
Other: Bore:
Other: Bore Of Gear/Brake Spindle Large End:
Other: Brake Spindle Bore Large End:
Other: Brake Spindle Bore Taper Per Ft:
Other: C Feeds:
Other: C Axis Cutter Spindle RPM:
Other: C Axis Cutter Spindle Ac Drive:
Other: C Axis Rotary Table Diameter:
Other: Chamfer Rolling Tool Bore Diameter:
Other: Center Distance Between Hob And Table:
Other: Coarsest Diametral Pitch:
Other: Cutter Arbor Cone:
Other: Cutter Length Max:
Other: Maximum Cutter Speed:
Other: Stroke Rate Range:

Do you have a Gleason 108 HYPOID GEAR GENERATOR to sell?

We are actively seeking a GLEASON 108 Hypoid Gear Generator, a notable piece of CNC gear machinery that exemplifies precision and versatility in gear manufacturing. This model is renowned for its ability to produce a wide range of hypoid gears, making it an essential asset for industries involved in manufacturing and precision engineering. Equipped with a diametral pitch ranging from DP 4 to 6.34 mod, this machine accommodates various gear specifications, allowing shops to tackle diverse projects with ease. The GLEASON 108 features a maximum cone distance of 5¼" when using a 30° spiral angle and a 7½" cutter, providing ample flexibility in gear design. With a workhead angle adjustable from -12° to 90°, operators can achieve the desired machining angles to create gears with extreme ratios, catering to any practical requirement.

This model can handle a minimum ratio of 2 to 1 for pinions operating with formate gears, and it can accommodate a maximum gear pitch diameter of up to 8½" at a 10 to 1 ratio, ensuring it meets various production needs. Additionally, the GLEASON 108 has a face width maximum of 1¼", and it can produce gears with a number of teeth ranging from 5 to 97, and even most numbers up to 175. The work spindle is well-designed, featuring a diameter of taper hole at the large end of 3.29/32" and a depth of taper at 6", which enhances its usability in manufacturing. The machine also boasts cutter diameters of 3½", 6", and 7½", providing you with options for different gear sizes. Sellers often part with their GLEASON 108 Hypoid Gear Generators due to various reasons such as upgrading to newer models, downsizing operations, or even closing facilities.

If you're considering selling your machine, we want to make the process as seamless as possible. Don't miss the opportunity to turn your unused equipment into cash today. Contact us to learn more about how we can assist you in selling your GLEASON 108 Hypoid Gear Generator.