Direct procurement2008 Model

Sell your Doosan PUMA MX2100 ST today.

MTE does not act as a broker, nor do we buy on consignment. We buy machinery and assets outright and arrange the pickup.

Make: Doosan
Model: PUMA MX2100 ST
Year: 2008
Category: CNC Lathes
Condition: Used / Surplus

Jason PuuriOwner, Superior Machine & Tool, Inc.Message From MTE Owner

Jason sets final pricing on the machines MTE buys.

Doosan PUMA MX2100 ST Specifications

# Of Tools: 1
Main Spindle Bore Diameter: 2.99"
Main Spindle Maximum Bar Work: 2.625"
Main Spindle Speed: 5,000 RPM
Main Spindle Horsepower (Cont. /30 Mins): 30
2Nd Spindle Bore Size: 2.56
2Nd Spindle Speed: 12,000 RPM
2Nd Spindle Horsepower (Cont. /30 Mins): 30/25
Atc Magazine Capacity: 40
Number Of Turrets: 1
Turret Tool Positions 1, 2: 12
B-Axis Travel: 240 (+/- 120) DEG.
B-Axis Head Indexing: 5°
B-Axis Milling Spindle Speed: 12,000 RPM
B-Axis Milling Spindle Horse Power: 25
B-Axis Rotary Tool Spindle Speed: 5,000 RPM
B-Axis Rotary Tool Spindle Horsepower: 7.5 HP
Chip Conveyor: Yes
Coolant Thru Milling Head: Yes
Machine Control Type: CNC (FANUC 31i)
Machine Weight: 26,450 LBS
Maximum Swing: 29.5"
Max Turning Diameter: 21.25"
Distance Between Spindles: 52.5"
X-Axis Travel (X1, X2, X3): 22.24/7.36
Z-Axis Travel (Z1, Z2, Z3): 41.3/41.3
Y-Axis Travel (Y1, Y2, Y3): 6.7” (+/- 3.35)
C-Axis Indexing (1, 2): .001
Other: SWING OVER BED 29.5"
Other: SWING OVER CARRIAGE 23.6"
Other: MAXIMUM BAR CAPACITY (2.55 RIGHT SPINDLE W/ WORK EJECTOR) 2.625
Other: MAXIMUM TURNING DIAMETER, MAIN SPINDLE 21.25"
Other: MAX. PERMISSIBLE WEIGHT (INCLUDING CHUCK) CHUCK WORK/SHAFT WORK 264 / 1012 LBS.
Other: DISTANCE BETWEEN MAIN & SUBSPINDLE NOSE 52.5
LEFT AND RIGHT SPINDLE: CHUCK SIZE 8"
Other: SPINDLE SPEED 5,000 RPM
Other: SPINDLE NOSE ASA-A2-6
Other: LEFT SPINDLE DRAWTUBE I.D. 2.68
Other: RIGHT SPINDLE DRAWTUBE I.D. 2.559
Other: SPINDLE BORE DIAMETER 2.99"
Other: AC HIGH TORQUE SPINDLE MOTOR (30 MIN. RATING) 30 HP
Other: MAXIMUM SPINDLE TORQUE (15% ED) 234 FT-LBS
LEFT (MAIN) AND RIGHT SPINDLE C-AXIS: MINIMUM PROGRAMMABLE ANGLE (DEGREES) .001
Other: RAPID TRAVERSE RATE (RPM) 400
Other: C-AXIS REPEATABILITY +/- .006 DEG.
Other: C-AXIS POSITIONING ACCURACY .0167 DEG.
MILLING SPINDLE: SPINDLE SPEED 12,000 RPM
Other: MOTOR POWER (10 MIN. RATING) 25 HP
Other: MAXIMUM SPINDLE TORQUE (15% ED) 60 FT-LBS
Other: TOOL INDEX (2,3 OR 4 INSERT MULTI-TOOLS) 30 DEG.
Other: B-AXIS (TILT) COUPLING INCREMENT 5 DEG.
Other: B-AXIS TRAVEL 240 (+/- 120) DEG.
Other: B-AXIS MINIMUM INCREMENT 0.001 DEG
Other: B-AXIS POSITIONING ACCURACY 0.006 DEG.
Other: B-AXIS REPEATABILITY 0.002 DEG.
BED, SADDLE, & CROSS SLIDE: X1 (UPPER) AXIS TRAVEL 22.24
Other: X2 (LOWER) AXIS TRAVEL 7.36
Other: Z1 (UPPER) AND Z2 (LOWER) AXIS TRAVEL 41.3
Other: ANGLE OF SLANT BED 60 DEGREES
Other: X1 AXIS RAPID TRAVERSE RATE 1,417 IPM
Other: Z1 AXIS RAPID TRAVERSE RATE 1,417 IPM
Other: X / Z AXIS BALL SCREW DIAMETER 1.42" / 1.57
Other: CONTINUOUS AXIS FEED THRUST (X1 / X2) 1,965 / 1,288 LBS
Other: CONTINUOUS AXIS FEED THRUST (Z1 / Z2) 1,965 / 1,075 LBS
Other: MAXIMUM AXIS FEED THRUST (X1 / X2) 3,145 / 2,062 LBS
Other: MAXIMUM AXIS FEED THRUST (Z1 / Z2) 3,145 / 1,720 LBS
Other: X AXIS REPEATABILITY + 0.00007"
Other: Z AXIS REPEATABILITY + 0.00011"
Y-AXIS: Y-AXIS TRAVEL 6.7 (+/- 3.35)
Other: Y-AXIS RAPID TRAVERSE RATE 1,024 IPM
Other: Y-AXIS REPEATABILITY .00011
ATC: TOOL HOLDER TYPE CAPTO-C6
Other: TOOL STORAGE CAPACITY CAM 40 (OPT. 80)
Other: MAX. TOOL DIAMETER 3.54
Other: MAX. TOOL DIAMETER W/O ADJACENT TOOLS 4.72
Other: MAX. TOOL LENGTH 11.8
Other: MAX. TOOL WEIGHT 17.6 LBS.
Other: TOOL SELECTION METHOD FIXED
Other: TOOL CHANGE TIME (TOOL TO TOOL) 1.8
TURRET LOWER: NUMBER OF TOOLS 12
Other: TOOL HOLDER TYPE BMT 55P
Other: TURNING TOOL SHANK SIZE 1.0"
Other: BORING BAR DIAMETER 1.5"
Other: TURRET INDEX TIME (NEXT STATION SWIVEL TIME) 0.2 SEC.
Other: TOOL SELECTION BI-DIRECTIONAL
Other: TURRET INDEX REPEATABILITY + .0005 DEGREE
ROTATING TOOLS LOWER TURRET: ROTATING TOOL RPM 5,000 RPM
Other: ROTATING TOOL SPINDLE MOTOR (25% ED) 7.5 HP
Other: ROTATING TOOL TORQUE (25% ED) 34.7 FT-LBS.
Other: ROTATING TOOL COLLET TYPE ER-25
Other: MILLING COLLET CAPACITY .079 TO .625"
COOLANT SYSTEM: MILLING SPINDLE COOLANT PUMP PRESSURE 145 PSI
Other: MILLING SPINDLE COOLANT PUMP MOTOR 3.0 HP
Other: LOWER TURRET COOLANT PUMP PRESSURE 65 PSI
Other: LOWER TURRET COOLANT PUMP MOTOR 1.2 HP
Other: COOLANT TANK CAPACITY 129 GALLONS
GENERAL: FLOOR SPACE (LENGTH X WIDTH) 191 X 97.5
Other: NET WEIGHT 26,450 LBS.
Other: MACHINE HEIGHT 111
Other: HEIGHT FROM FLOOR TO SPINDLE CENTER LINE 48.8
Other: VOLTAGE REQUIRED 205 - 235 VOLT / 3 PHASE
Other: POWER REQUIREMENT 87 KVA
Other: SPECIFICATIONS.

Do you have a Doosan PUMA MX2100 ST to sell?

We are actively seeking a 2008 DOOSAN PUMA MX2100 ST Live Tooling Lathe. This exceptional CNC lathe features impressive specifications that make it a valuable asset for any machining operation. With a maximum swing of 29.5 inches and a maximum turning diameter of 21.25 inches, this model offers the versatility and capability that modern shops demand. The main spindle, with a bore diameter of 2.99 inches, operates at a maximum speed of 5,000 RPM, providing the power necessary for demanding tasks. Additionally, the sub spindle can reach an impressive 12,000 RPM, enhancing productivity and allowing for complex machining processes.

Equipped with a full contouring C-axis and a B-axis that provides a travel range of 240 degrees, this machine is designed to deliver precision and efficiency. The Y-axis travel of 6.7 inches (+/- 3.35) enables intricate part geometries, while the CNC (FANUC 31i) control system ensures ease of operation and programming capabilities. The turret offers 12 tool positions, allowing for quick tool changes and reduced downtime during production runs. At Superior Machine Tools, we understand that many sellers consider parting with their machines for various reasons - whether it's due to upgrading to newer technology, downsizing operations, or even closing a facility altogether. We appreciate the value that machines like the DOOSAN PUMA MX2100 ST offer and are committed to providing a fair and transparent selling process.

If you own a 2008 DOOSAN PUMA MX2100 ST or a similar live tooling lathe, we encourage you to reach out to us. Our team is dedicated to making the selling process as straightforward and beneficial for you as possible. Don't hesitate to contact us today to discuss your machine and how we can help you maximize its value.