Sell your Doosan S550L 2004 today.
Doosan S550L Specifications
| Maximum Spindle Speed (Sub-Spindle) | 2500 rpm |
|---|---|
| Tailstock Quill Diameter | Not Available |
| Quill Travel | Not Available |
| Chuck Size 1 | Not Available |
| Travels (Z) | 1150 mm |
| Accuracy Of The Cross Section Diameter | Not Available |
| C2-Axis | Not Available |
| C-Axis Spindle Indexing | Not Available |
| Max Weight | Not Available |
| T.S. Body / Travel | Not Available |
| Turret 2 Capacity | Not Available |
| Speed Range | Not Available |
| Gear Ranges | Not Available |
| Y - Axis Travel Y1 | Not Available |
| C2-Axis (Indexing Positions Of Sub Spindle) | Not Available |
| Max. Swing Over Cross Slide | Not Available |
| Maximum Spindle Torque | Not Available |
| Maximum Tool Length | Not Available |
| Swing | Not Available |
| Rapid Traverse Rate - X1 | Not Available |
| Y Axis Rapids | Not Available |
| Sub Spindle - Spindle Motor | Not Available |
| Max. Turning Dia | Not Available |
| Main Spindle Indexing | Not Available |
| Rapid Traverse Rates Z | Not Available |
| Spindle Motor Power | 22 kW |
| Z-Axis Rapid Traverse | Not Available |
| Turret Tool Positions 1 | Not Available |
| Quill Stroke Of Tailstock | Not Available |
| X-Axis Feedrate | Not Available |
| Lower Turret Tools | Not Available |
| Distance Spindles | Not Available |
| Live Tooling Milling | Not Available |
| Spindle Speeds | Not Available |
| Maximum Turning Diameter Shaft Work | Not Available |
| Atc / Revolver | Not Available |
| Spindle To Table Distance | Not Available |
| Control Panel | Not Available |
| Gripper Jaw Stroke | Not Available |
| Diameter Of Quill (Tail Stock) | Not Available |
| Maximum Tool Diameter | Not Available |
| Live Milling | Not Available |
| Max Cutting / Turning Diameter | Not Available |
| Max. Diameter | Not Available |
| B-Axis Travel | Not Available |
| No. Of Tool Stations | Not Available |
| Lower Turret Shank | Not Available |
| Milling Spindle Speeds | Not Available |
| Sub-Spindle Bore | Not Available |
| Turning Diameter (Max / Std) | Not Available |
| Sub Spindle Nose | Not Available |
| Rotary Tool Main Motor | Not Available |
| Spindle Override | Not Available |
| Programming | Not Available |
| Rotating Tool Speed | Not Available |
| Main Spindle C - Axis | Not Available |
| Spindle | Not Available |
| Number Of Turret Stations | Not Available |
| Table Horse Power | Not Available |
| Second Spindle Speed | Not Available |
| C - Axis Indexing 2 | Not Available |
| Sub Spindle Chuck Size | Not Available |
| Right (Sub) Spindle Speed | Not Available |
| Spindle Nose 1 | Not Available |
| Xz-Axis Travels | Not Available |
| Quill Bore Taper | Not Available |
| Rapid Traverse Rate C | Not Available |
| B | Not Available |
| Rotary Tool Motor | Not Available |
| RPM Of Mill Spindle | Not Available |
| Horsepower Head 1 | Not Available |
| Head 2 | Not Available |
| X – Axis Travel | Not Available |
| Loading Time | Not Available |
| Max. Machining Dia. Of Bar Work | Not Available |
| Revolver Position Change | Not Available |
| Number Of Tools | Not Available |
| Live Spindle Motor | Not Available |
| Number Of Turret Positions | Not Available |
| Max Turn Dia | Not Available |
| Main Spindle Chuck | Not Available |
| Tooling Flexibility | Not Available |
| Tool Spindle Motor | Not Available |
| Live Milling Speed | Not Available |
| Rotary Tool RPM | Not Available |
| Spindle Indexing Increments 1 / 2 | Not Available |
| Repeatability | Not Available |
| Sub Spindle Indexing | Not Available |
| Ball Screw Diameter | Not Available |
| Maximum Machining Length | Not Available |
| Swing Over The Cross-Slide | Not Available |
| Z | Not Available |
| B Axis Travel | Not Available |
| Coolant System | Not Available |
| Y - Axis Travel | Not Available |
| Turret 2 - X-Axis Travel | Not Available |
| Turret Positions | Not Available |
| Rapid Traverse X | Not Available |
| Y | Not Available |
| # Axis | Not Available |
| Machining Length | Not Available |
| Tool Capacity | Not Available |
| Min. Spindle Indexing Angle (C-Axis) | Not Available |
| Max Tool Diameter | Not Available |
| O.D Tool Size | Not Available |
| B-Axis Head Indexing | Not Available |
| X Axis Rapid Traverse Rate | Not Available |
| Z2-Axis | Not Available |
| Way Lube Oil Skimmer | Not Available |
| Sub Spindle - Spindle Speed | Not Available |
| Max Table Load | Not Available |
| Rotation Speed | Not Available |
| 2Nd Spindle RPM | Not Available |
| Tool Holders Type | Not Available |
| Spindle Torque | Not Available |
| Rapid Traverse Y Axis | Not Available |
| X-Axis Travels | Not Available |
| C - Axis Spindle Indexing | Not Available |
| Rapid Traverse Rates (X / Z) | Not Available |
| Programmable Logic Controller (Plc) | Not Available |
| Permissible Weight (Including Chuck) In Chuck | Not Available |
| Spindle Bearing Diameter | Not Available |
| Max. Length | Not Available |
| Max. Spindle Power | Not Available |
| Approximate Dimensions | Not Available |
| Spindle Nose Bore Bar Capacity | Not Available |
| Rapid Rate (Z-Axis) | Not Available |
| Live Tool | Not Available |
| Spindle Speeds No. 1 & 2 | Not Available |
| Rapid Traverse (X/Z) | Not Available |
| Power Supply | Not Available |
| Bar Working Capacity | Not Available |
| Ergonomics | Not Available |
| Rapid Traverse C Axis | Not Available |
| Z1-Z2 Axis | Not Available |
| Maximum Part Diameter | Not Available |
| Tool Turret Positions | Not Available |
| Main Spindle Nose | Not Available |
| Spindle Bar Capacity 1 | Not Available |
| Rod Diameter In Spindle | Not Available |
| Max Upper Turret Live Tooling Speed | Not Available |
| C-Axis Spindle Movement | Not Available |
| Sub Spindle Torque | Not Available |
| Max. Swing | Not Available |
| Max Swing Over Carriage | Not Available |
| Approx Dimensions (Lxwxh) | Not Available |
| Max RPM | Not Available |
| X Travel | Not Available |
| Type | Not Available |
| Max. Milling Speeds | Not Available |
| Through Diameter Over Support | Not Available |
| Bed | Not Available |
| Saddle | Not Available |
| Cross Slide | Not Available |
| X - Axis Travel X1 | Not Available |
| X2 | Not Available |
| C - Axis Indexing 1 | Not Available |
| Electrics | Not Available |
| Programming And Operation | Not Available |
| Recommended Machining Diameter | Not Available |
| Rapid Traverse Rate - Z1 | Not Available |
| Maximum Swing Over Bed | Not Available |
| Lower Turret Positions | Not Available |
| Hydraulic Steady Rest | Not Available |
| Drive Motor Power (Cont/S3 25%) | Not Available |
| Fixed Holders | Not Available |
| Main Spindle Motor | Not Available |
| X2-Axis Travels | Not Available |
| Spindle Nose / Spindle Bore | Not Available |
| Max. Bar Capacity | Not Available |
| Rapid Traverse Rate X1(2X)/Z1(2X)/Y-Axes | Not Available |
| Main Spindle Speed | Not Available |
| Maximum Turning Length | Not Available |
| Programmable Tailstock | Not Available |
| Live Milling Thru Spindle Coolant | Not Available |
| Rotary Tool Speed 1 / 2 | Not Available |
| Number Of Spindles | Not Available |
| Sub-Spindle | Not Available |
| Y-Axis (Upper & Lower Turret) | Not Available |
| Spindle Bore Diameter 1 | Not Available |
| Tail Stock Quill Diameter | Not Available |
| Number Of Tool Positions | Not Available |
| Maximum Turning Diameter Upper/Lower | Not Available |
| Turning Length | 1130 mm |
| Turning Ø | 550 mm |
| Ø above the bed | 710 mm |
| Length between centers | 1230 mm |
| X-axis | 315 mm |
| Z-axis | 1150 mm |
| Spindle bore | 102 mm |
| Number of turrets | 12 |
| Number of tools on turret | 12 |
| Number of rotating tools | 12 |
| Turning speed | 2500 rpm |
| Spindle motor power | 22 kW |
Do you have a Doosan S550L to sell?
We are actively seeking a 2004 Doosan S550L, a highly efficient CNC turning center known for its impressive performance and reliability in precision machining. This model features a substantial turning length of 1130 mm and a turning diameter of 550 mm, making it ideal for a variety of turning applications. The Doosan S550L boasts a spacious Ø above the bed of 710 mm and a generous length between centers of 1230 mm, allowing for the machining of larger workpieces with ease. Equipped with an X-axis travel of 315 mm and a Z-axis travel of 1150 mm, this lathe provides excellent maneuverability for complex machining tasks.
The spindle bore of 102 mm enhances its versatility, enabling the use of larger tools and accommodating various workpiece sizes. With a maximum turning speed of 2500 rpm, the Doosan S550L delivers rapid and precise operations, enhancing productivity in any manufacturing environment. The machine is designed with a robust spindle motor power of 22 kW, ensuring consistent performance even under heavy workloads. Additionally, the Doosan S550L features a total of 12 turrets, each equipped with 12 tools, allowing for quick tool changes and increased efficiency.
The inclusion of 12 rotating tools further expands its capabilities, making it suitable for a wide range of machining operations. If you have a 2004 Doosan S550L that you are considering selling, we invite you to reach out to us. At Superior Machine Tools, we specialize in purchasing used CNC machines and offer competitive pricing to ensure you receive the best value for your equipment. Contact us today to discuss your machine and explore how we can assist you in making a smooth transaction.
Frequently Asked Questions
What types of machinery and equipment do you purchase?
MTE buys a wide range of used and surplus machinery, including CNC machines, metalworking and fabrication equipment, industrial robots, inspection and testing systems, and material handling assets from industries such as metals manufacturing, oil and gas, automotive, and mining.
How does MTE assess the value of my surplus equipment?
Our team conducts a thorough review using current market data, equipment specifications, age, and condition. We provide fair market valuations given your specific situation to ensure you receive maximum value for your assets.
What is the process for selling my excess machinery to MTE?
We make it simple: contact us with asset details, and our specialists will review and coordinate an inspection if needed. After finalizing terms, we handle all logistics, removal, and payment for a smooth and efficient transaction.
How quickly can MTE complete the purchase and removal of my surplus equipment?
MTE prioritizes safe and efficient equipment removal, adhering to your company's specific requirements and timeframes. We coordinate all logistics to ensure the process is carried out safely and efficiently, minimizing risks and protecting both personnel and equipment.
What documentation is required to sell my used machinery?
We typically request detailed equipment information, such as make, model, year, and maintenance records, along with proof of ownership. Our team will guide you through all necessary paperwork to ensure a secure and transparent transaction.
Where is MTE located, and do you offer services outside Michigan?
While MTE is proudly based in Michigan, our services extend across the entire United States and internationally. No matter where your surplus machinery or equipment is located, our team has the experience and logistics capabilities to manage evaluations, purchases, and removals efficiently.
Is MTE an equipment broker?
No. Our business model is based on purchasing equipment outright — MTE does not act as a broker nor do we buy on consignment. We buy machinery and assets upfront, providing immediate payment and a straightforward transaction.
Related Machines
“Selling my CNC machine with MTE was seamless. The team guided me through every step and offered a fair price quickly.”
Michael Rodriguez
Plant Operations Manager
Have one to sell?
MTE is the direct buyer. Quote in 24-48 hours, free pickup, pay on collection.