Sell your Doosan PUMA 2010 today.
Doosan PUMA Specifications
| Maximum Spindle Speed (Sub-Spindle) | 2800 RPM |
|---|---|
| Tailstock Quill Diameter | MT-4 |
| Chuck Size 1 | 12" 304.8 mm |
| Travels (Z) | 52.36" |
| Accuracy Of The Cross Section Diameter | 23.2" 589.28 mm |
| C2-Axis | Yes |
| C-Axis Spindle Indexing | Yes |
| Max Weight | 14500 lbs |
| T.S. Body / Travel | Yes |
| Turret 2 Capacity | 12 Stations |
| Speed Range | 2800 RPM |
| Y - Axis Travel Y1 | 14.56" |
| C2-Axis (Indexing Positions Of Sub Spindle) | Yes |
| Max. Swing Over Cross Slide | 22.44" |
| Maximum Spindle Torque | 35 hp |
| Maximum Tool Length | 50.39" |
| Swing | 23.2" 589.28 mm |
| Rapid Traverse Rate - X1 | 787 IPM |
| Sub Spindle - Spindle Motor | No |
| Max. Turning Dia | 17.8" 452.12 mm |
| Main Spindle Indexing | A2-11 |
| Rapid Traverse Rates Z | 945 IPM |
| Spindle Motor Power | 35 HP |
| Z-Axis Rapid Traverse | 945 IPM |
| Turret Tool Positions 1 | 12 Stations |
| Quill Stroke Of Tailstock | Yes |
| X-Axis Feedrate | 11.10" |
| Live Tooling Milling | No |
| Spindle Speeds | 2800 RPM |
| Maximum Turning Diameter Shaft Work | 15.74" |
| Spindle To Table Distance | 50.39" |
| Gripper Jaw Stroke | Not specified |
| Diameter Of Quill (Tail Stock) | Not specified |
| Maximum Tool Diameter | 4" 101.6 mm |
| Live Milling | No |
| Max Cutting / Turning Diameter | Not specified |
| Max. Diameter | Not specified |
| B-Axis Travel | Not specified |
| No. Of Tool Stations | 12 Stations |
| Lower Turret Shank | Not specified |
| Milling Spindle Speeds | Not specified |
| Sub-Spindle Bore | Not specified |
| Turning Diameter (Max / Std) | Not specified |
| Sub Spindle Nose | Not specified |
| Rotary Tool Main Motor | Not specified |
| Spindle Override | Not specified |
| Programming | Not specified |
| Rotating Tool Speed | Not specified |
| Main Spindle C - Axis | Not specified |
| Number Of Turret Stations | 12 Stations |
| Table Horse Power | Not specified |
| Second Spindle Speed | Not specified |
| C - Axis Indexing 2 | Not specified |
| Sub Spindle Chuck Size | Not specified |
| Right (Sub) Spindle Speed | Not specified |
| Spindle Nose 1 | Not specified |
| Xz-Axis Travels | Not specified |
| Quill Bore Taper | Not specified |
| Rapid Traverse Rate C | Not specified |
| B | Not specified |
| Rotary Tool Motor | Not specified |
| RPM Of Mill Spindle | Not specified |
| Horsepower Head 1 | Not specified |
| Head 2 | Not specified |
| X – Axis Travel | Not specified |
| Loading Time | Not specified |
| Max. Machining Dia. Of Bar Work | Not specified |
| Revolver Position Change | Not specified |
| Number Of Tools | Not specified |
| Live Spindle Motor | Not specified |
| Number Of Turret Positions | Not specified |
| Max Turn Dia | Not specified |
| Main Spindle Chuck | Not specified |
| Tooling Flexibility | Not specified |
| Tool Spindle Motor | Not specified |
| Live Milling Speed | Not specified |
| Rotary Tool RPM | Not specified |
| Spindle Indexing Increments 1 / 2 | Not specified |
| Repeatability | Not specified |
| Sub Spindle Indexing | Not specified |
| Ball Screw Diameter | Not specified |
| Maximum Machining Length | 50.4" 1,280.2 mm |
| Swing Over The Cross-Slide | 14.56" |
| Z | 52.36" |
| B Axis Travel | Not specified |
| Coolant System | Yes |
| Y - Axis Travel | 14.56" |
| Turret 2 - X-Axis Travel | Not specified |
| Turret Positions | Not specified |
| Rapid Traverse X | Not specified |
| Y | 14.56" |
| # Axis | Not specified |
| Machining Length | 50.4" 1,280.2 mm |
| Tool Capacity | 12 Stations |
| Min. Spindle Indexing Angle (C-Axis) | Not specified |
| Max Tool Diameter | 4" 101.6 mm |
| O.D Tool Size | Not specified |
| B-Axis Head Indexing | Not specified |
| X Axis Rapid Traverse Rate | 787 IPM |
| Z2-Axis | Not specified |
| Way Lube Oil Skimmer | Not specified |
| Sub Spindle - Spindle Speed | No |
| Max Table Load | Not specified |
| Rotation Speed | Not specified |
| 2Nd Spindle RPM | Not specified |
| Tool Holders Type | Not specified |
| Spindle Torque | Not specified |
| Rapid Traverse Y Axis | Not specified |
| X-Axis Travels | 11.10" |
| C - Axis Spindle Indexing | Yes |
| Rapid Traverse Rates (X / Z) | Not specified |
| Programmable Logic Controller (Plc) | Not specified |
| Permissible Weight (Including Chuck) In Chuck | Not specified |
| Spindle Bearing Diameter | Not specified |
| Max. Length | Not specified |
| Max. Spindle Power | Not specified |
| Approximate Dimensions | 160" x 75" x 82" |
| Spindle Nose Bore Bar Capacity | 3 1/8" |
| Rapid Rate (Z-Axis) | 945 IPM |
| Live Tool | No |
| Spindle Speeds No. 1 & 2 | 2800 RPM |
| Rapid Traverse (X/Z) | Not specified |
| Power Supply | 200V - 220V / 3-Phase / 45.14 KVA / 50/60 HZ |
| Bar Working Capacity | 4" 101.6 mm |
| Ergonomics | Not specified |
| Rapid Traverse C Axis | Not specified |
| Z1-Z2 Axis | Not specified |
| Maximum Part Diameter | Not specified |
| Tool Turret Positions | 12 Stations |
| Main Spindle Nose | A2-11 |
| Spindle Bar Capacity 1 | Not specified |
| Spindle Bar Capacity 2 | Not specified |
| Rod Diameter In Spindle | Not specified |
| Max Upper Turret Live Tooling Speed | Not specified |
| C-Axis Spindle Movement | Not specified |
| Sub Spindle Torque | Not specified |
| Max. Swing | 23.2" 589.28 mm |
| Max Swing Over Carriage | Not specified |
| Approx Dimensions (Lxwxh) | 160" x 75" x 82" |
| Max RPM | 2800 RPM |
| X Travel | Not specified |
| Type | Not specified |
| Max. Milling Speeds | Not specified |
| Through Diameter Over Support | Not specified |
| Bed | Not specified |
| Saddle | Not specified |
| Cross Slide | Not specified |
| X - Axis Travel X1 | Not specified |
| X2 | Not specified |
| C - Axis Indexing 1 | Not specified |
| Electrics | Not specified |
| Programming And Operation | Not specified |
| Recommended Machining Diameter | Not specified |
| Rapid Traverse Rate - Z1 | Not specified |
| Maximum Swing Over Bed | 22.44" |
| Lower Turret Positions | Not specified |
| Hydraulic Steady Rest | Not specified |
| Drive Motor Power (Cont/S3 25%) | Not specified |
| Fixed Holders | Not specified |
| Main Spindle Motor | 35 HP |
| X2-Axis Travels | Not specified |
| Spindle Nose / Spindle Bore | A2-11 / 3 1/8" |
| Max. Bar Capacity | 4" 101.6 mm |
| Rapid Traverse Rate X1(2X)/Z1(2X)/Y-Axes | Not specified |
| Main Spindle Speed | 2800 RPM |
| Maximum Turning Length | 50.39" |
| Programmable Tailstock | Not specified |
| Live Milling Thru Spindle Coolant | Not specified |
| Rotary Tool Speed 1 / 2 | Not specified |
| Number Of Spindles | Not specified |
| Sub-Spindle | No |
| Y-Axis (Upper & Lower Turret) | 14.56" |
| Spindle Bore Diameter 1 | Not specified |
| Tail Stock Quill Diameter | MT-4 |
| Number Of Tool Positions | Not specified |
| Maximum Turning Diameter Upper/Lower | Not specified |
| Turning Length | 50.39" |
| Rapid Traverse X-Axis | Not specified |
| Automatic Tool Presetter | Not specified |
| Maximum Turning Diameter | 15.74" |
| Spindle Bore Diameter 2 | Not specified |
| Turning Size | Not specified |
| Max Turning Diameter | Not specified |
| Rapid Traverse Rates X/Z | Not specified |
| Overhauled | Not specified |
| Turret Clamping Force | Not specified |
| Z-Travel | 52.36" |
| Swing Over Saddle / Cross Slide | 14.56" |
| Station On Turret | Not specified |
| Tool Indexing Time | Not specified |
| Sub-Spindle Speed (RPM) | Not specified |
| Rapid Traverse X & Z | Not specified |
| RPM | Not specified |
| Number Of Tool Stations | 12 Stations |
| Turret Tool Size | Not specified |
| Turret Configuration 1 | Not specified |
| 2 | Not specified |
| Mount | Not specified |
| Rapid Traverse Rates X Z Y | Not specified |
| Tool Turret Or Tool Post | Not specified |
| Z-Axis Travel | 52.36" |
| Distance Between Centers | 60" |
| Approx Machine Weight | 14500 lbs |
| # Turret Stations | 12 Stations |
| Maximum Machining Diameter | Not specified |
| Maximum I.D. Tool Size | Not specified |
| Spindle Bore/Spindle Bar | 3 1/8" |
| Diameter At The Nose | Not specified |
| Turret Rotary Tool Speeds 1 | Not specified |
| Draw Tube I.D. | Not specified |
| Bar | Not specified |
| Max Rotation Speed | Not specified |
| Axis | Not specified |
| Ac Spindle Motor (30 Min.) | Not specified |
| Horsepower Of Mill Spindle | 35 HP |
| C Axis Index | Not specified |
| Spindle Bar Capacity | 4" 101.6 mm |
| B-Axis Feedrate | Not specified |
| Max Distance Between Centers | Not specified |
| Approx. Machine Weight | 14500 lbs |
| Y-Axis Feedrate | Not specified |
| Tool Magazine Capacity | Not specified |
| B - Axis Milling Spindle Taper | Not specified |
| Spindle Horsepower 2 | Not specified |
| Spindles | Not specified |
| Z1-Axis Travels | Not specified |
| Y-Axis Travels | 14.56" |
| X Axis Rapid Traverse | 787 IPM |
| B-Axis | Not specified |
| Maxim | Not specified |
Do you have a Doosan PUMA to sell?
<p>We are actively seeking a 2010 Doosan PUMA CNC Machine. This robust metal cutting machine is known for its exceptional performance and reliability, making it a sought-after choice for precision machining. With a maximum turning diameter of 15.7 inches and a turning length of 50.4 inches, the PUMA is designed to handle a variety of workpieces efficiently. It boasts a maximum bar capacity of 4.05 inches and a swing over bed of 22.4 inches, providing versatility for different applications.</p> <p>The Doosan PUMA features impressive travels with an X-axis travel of 11.1 inches and a Z-axis travel of 52.4 inches, allowing for extensive machining capabilities.
Its rapid traverse rates are noteworthy, with the X-axis achieving 787 IPM and the Z-axis reaching 945 IPM, ensuring quick and efficient production cycles. The spindle operates at speeds ranging from 0 to 2800 RPM, powered by a robust 35 HP spindle motor, making it suitable for a wide range of materials and cutting operations. This machine is equipped with a 12-inch chuck, a tool presetter, a tailstock, and a chip conveyor, all of which enhance its functionality and ease of use.</p> <p>Sellers often part with machines like the Doosan PUMA due to various reasons such as upgrading to newer models, downsizing operations, or facility closures. At Superior Machine Tools, we understand the importance of a seamless transition when selling your equipment.
We are actively buying machines nationwide, providing sellers with a reliable option to offload their used CNC machines while ensuring they receive fair value for their assets.</p> <p>We offer fast payments and handle all logistics involved in the sale, making the process as smooth as possible for our sellers. If you have a Doosan PUMA or any other CNC machine you are looking to sell, we invite you to reach out to us today. Our team is ready to assist you in getting the best deal for your equipment.</p>
Frequently Asked Questions
What types of machinery and equipment do you purchase?
MTE buys a wide range of used and surplus machinery, including CNC machines, metalworking and fabrication equipment, industrial robots, inspection and testing systems, and material handling assets from industries such as metals manufacturing, oil and gas, automotive, and mining.
How does MTE assess the value of my surplus equipment?
Our team conducts a thorough review using current market data, equipment specifications, age, and condition. We provide fair market valuations given your specific situation to ensure you receive maximum value for your assets.
What is the process for selling my excess machinery to MTE?
We make it simple: contact us with asset details, and our specialists will review and coordinate an inspection if needed. After finalizing terms, we handle all logistics, removal, and payment for a smooth and efficient transaction.
How quickly can MTE complete the purchase and removal of my surplus equipment?
MTE prioritizes safe and efficient equipment removal, adhering to your company's specific requirements and timeframes. We coordinate all logistics to ensure the process is carried out safely and efficiently, minimizing risks and protecting both personnel and equipment.
What documentation is required to sell my used machinery?
We typically request detailed equipment information, such as make, model, year, and maintenance records, along with proof of ownership. Our team will guide you through all necessary paperwork to ensure a secure and transparent transaction.
Where is MTE located, and do you offer services outside Michigan?
While MTE is proudly based in Michigan, our services extend across the entire United States and internationally. No matter where your surplus machinery or equipment is located, our team has the experience and logistics capabilities to manage evaluations, purchases, and removals efficiently.
Is MTE an equipment broker?
No. Our business model is based on purchasing equipment outright — MTE does not act as a broker nor do we buy on consignment. We buy machinery and assets upfront, providing immediate payment and a straightforward transaction.
Related Machines
“Selling my CNC machine with MTE was seamless. The team guided me through every step and offered a fair price quickly.”
Michael Rodriguez
Plant Operations Manager
Have one to sell?
MTE is the direct buyer. Quote in 24-48 hours, free pickup, pay on collection.