Sell your Doosan 2600SY 2018 today.
Doosan 2600SY Specifications
| Maximum Spindle Speed (Sub-Spindle) | 4500 RPM |
|---|---|
| Tailstock Quill Diameter | 2.0000" |
| Quill Travel Taper | 3.34" |
| Chuck Size 1 | 10" |
| Chuck Size 2 | 8" |
| Travels (Z) | 32.7" |
| Travels (Y) | 4.1" |
| Accuracy Of The Cross Section Diameter | .001 INDEXING |
| C2-Axis | .001 INDEXING |
| C-Axis Spindle Indexing | .001 INDEXING |
| Max Weight | 16,100 LBS. |
| T.S. Body / Travel | 29.9" |
| Turret 2 Capacity | 12/24 POSITION |
| Speed Range | 4000-4500 RPM |
| Gear Ranges | 2 |
| Max. Swing Over Cross Slide | 30.7" |
| Maximum Spindle Torque | Not provided |
| Maximum Tool Length | Not provided |
| Swing | 30.7" |
| Rapid Traverse Rate - X1 | 1181 IPM |
| Sub Spindle - Spindle Motor | Not provided |
| Max. Turning Dia | 14.8" |
| Main Spindle Indexing | Not provided |
| Rapid Traverse Rates Z | 1181 IPM |
| Spindle Motor Power | 30 HP (Spindle 1), 11 HP (Spindle 2) |
| Z-Axis Rapid Traverse | 1181 IPM |
| Turret Tool Positions 1 | 12/24 POSITION |
| Quill Stroke Of Tailstock | Not provided |
| X-Axis Feedrate | Not provided |
| Lower Turret Tools | Not provided |
| Distance Spindles | 32.7" |
| Live Tooling Milling | Not provided |
| Spindle Speeds | 4000 RPM (Spindle 1), 4500 RPM (Spindle 2) |
| Maximum Turning Diameter Shaft Work | Not provided |
| Atc / Revolver | Not provided |
| Spindle To Table Distance | Not provided |
| Control Panel | Not provided |
| Gripper Jaw Stroke | Not provided |
| Diameter Of Quill (Tail Stock) | 2.0000" |
| Maximum Tool Diameter | Not provided |
| Live Milling | Not provided |
| Max Cutting / Turning Diameter | Not provided |
| Max. Diameter | Not provided |
| B-Axis Travel | Not provided |
| No. Of Tool Stations | Not provided |
| Lower Turret Shank | Not provided |
| Milling Spindle Speeds | Not provided |
| Sub-Spindle Bore | Not provided |
| Turning Diameter (Max / Std) | 14.8" |
| Sub Spindle Nose | Not provided |
| Rotary Tool Main Motor | Not provided |
| Spindle Override | Not provided |
| Programming | Not provided |
| Rotating Tool Speed | Not provided |
| Main Spindle C - Axis | Not provided |
| Number Of Turret Stations | Not provided |
| Table Horse Power | Not provided |
| Second Spindle Speed | Not provided |
| C - Axis Indexing 2 | .001 INDEXING |
| Sub Spindle Chuck Size | Not provided |
| Right (Sub) Spindle Speed | Not provided |
| Spindle Nose 1 | 2.0000" |
| Xz-Axis Travels | 10.2" (X1, X2, X3), 32.7" (Z1, Z2, Z3) |
| Quill Bore Taper | 3.34" |
| Rapid Traverse Rate C | Not provided |
| B | Not provided |
| Rotary Tool Motor | Not provided |
| RPM Of Mill Spindle | Not provided |
| Horsepower Head 1 | Not provided |
| Head 2 | Not provided |
| X – Axis Travel | Not provided |
| Loading Time | Not provided |
| Max. Machining Dia. Of Bar Work | Not provided |
| Revolver Position Change | Not provided |
| Number Of Tools | Not provided |
| Live Spindle Motor | Not provided |
| Number Of Turret Positions | Not provided |
| Max Turn Dia | Not provided |
| Main Spindle Chuck | Not provided |
| Tooling Flexibility | Not provided |
| Tool Spindle Motor | Not provided |
| Live Milling Speed | Not provided |
| Rotary Tool RPM | Not provided |
| Spindle Indexing Increments 1 / 2 | Not provided |
| Repeatability | Not provided |
| Sub Spindle Indexing | Not provided |
| Ball Screw Diameter | Not provided |
| Maximum Machining Length | Not provided |
| Swing Over The Cross-Slide | Not provided |
| Z | 32.7" |
| B Axis Travel | Not provided |
| Coolant System | Not provided |
| Y - Axis Travel | 4.1" |
| Turret 2 - X-Axis Travel | Not provided |
| Turret Positions | Not provided |
| Rapid Traverse X | 1181 IPM |
| Y | 4.1" |
| # Axis | Not provided |
| Machining Length | Not provided |
| Tool Capacity | Not provided |
| Min. Spindle Indexing Angle (C-Axis) | Not provided |
| Max Tool Diameter | Not provided |
| O.D Tool Size | Not provided |
| B-Axis Head Indexing | Not provided |
| X Axis Rapid Traverse Rate | 1181 IPM |
| Way Lube Oil Skimmer | Not provided |
| Sub Spindle - Spindle Speed | Not provided |
| Max Table Load | Not provided |
| Rotation Speed | Not provided |
| 2Nd Spindle RPM | Not provided |
| Tool Holders Type | Not provided |
| Spindle Torque | Not provided |
| Rapid Traverse Y Axis | 393 IPM |
| X-Axis Travels | 10.2" (X1, X2, X3) |
| C - Axis Spindle Indexing | .001 INDEXING |
| Rapid Traverse Rates (X / Z) | 1181 IPM |
| Programmable Logic Controller (Plc) | Not provided |
| Permissible Weight (Including Chuck) In Chuck | 16,100 LBS. |
| Spindle Bearing Diameter | Not provided |
| Max. Length | Not provided |
| Max. Spindle Power | Not provided |
| Approximate Dimensions | Not provided |
| Spindle Nose Bore Bar Capacity | Not provided |
| Rapid Rate (Z-Axis) | 1181 IPM |
| Live Tool | Not provided |
| Spindle Speeds No. 1 & 2 | 4000-4500 RPM |
| Rapid Traverse (X/Z) | 1181 IPM |
| Power Supply | Not provided |
| Bar Working Capacity | 3" |
| Ergonomics | Not provided |
| Rapid Traverse C Axis | Not provided |
| Z1-Z2 Axis | 32.7" |
| Maximum Part Diameter | Not provided |
| Tool Turret Positions | 12/24 POSITION |
| Main Spindle Nose | Not provided |
| Spindle Bar Capacity 1 | 3" |
| Spindle Bar Capacity 2 | 3" |
| Rod Diameter In Spindle | Not provided |
| Max Upper Turret Live Tooling Speed | Not provided |
| C-Axis Spindle Movement | Not provided |
| Sub Spindle Torque | Not provided |
| Max. Swing | 30.7" |
| Max Swing Over Carriage | Not provided |
| Approx Dimensions (Lxwxh) | Not provided |
| Max RPM | Not provided |
| X Travel | Not provided |
| Type | Not provided |
| Max. Milling Speeds | Not provided |
| Through Diameter Over Support | Not provided |
| Bed, Saddle, & Cross Slide | Not provided |
| X - Axis Travel X1 | 10.2" |
| X2 | 10.2" |
| X3 | 10.2" |
| C - Axis Indexing 1 | .001 INDEXING |
| Electrics | Not provided |
| Programming And Operation | Not provided |
| Recommended Machining Diameter | Not provided |
| Rapid Traverse Rate - Z1 | 1181 IPM |
| Maximum Swing Over Bed | 30.7" |
| Lower Turret Positions | Not provided |
| Hydraulic Steady Rest | Not provided |
| Drive Motor Power (Cont/S3 25%) | Not provided |
| Fixed Holders | Not provided |
| Main Spindle Motor | Not provided |
| X2-Axis Travels | 10.2" |
| Spindle Nose / Spindle Bore | 2.0000" / 3.34" |
| Max. Bar Capacity | 3" |
| Rapid Traverse Rate X1(2X)/Z1(2X)/Y-Axes | 1181 IPM |
| Main Spindle Speed | 4000 RPM |
| Maximum Turning Length | 29.9" |
| Programmable Tailstock | Not provided |
| Live Milling Thru Spindle Coolant | Not provided |
| Rotary Tool Speed 1 / 2 | 5000 RPM |
| Number Of Spindles | Not provided |
| Sub-Spindle | Not provided |
| Y-Axis (Upper & Lower Turret) | 4.1" |
| Spindle Bore Diameter 1 | 3.34" |
| Tail Stock Quill Diameter | 2.0000" |
| Number Of Tool Positions | Not provided |
| Maximum Turning Diameter Upper/Lower | 14.8" |
| Turning Length | 29.9" |
| Rapid Traverse X-Axis | 1181 IPM |
| Automatic Tool Presetter | Not provided |
| Maximum Turning Diameter | 14.8" |
| Spindle Bore Diameter 2 | 2.4" |
| Turning Size | Not provided |
| Max Turning Diameter | 14.8" |
| Rapid Traverse Rates X/Z | 1181 IPM |
| Turret Clamping Force | Not provided |
| Z-Travel | 32.7" |
| Swing Over Saddle / Cross Slide | Not provided |
| Station On Turret | Not provided |
| Tool Indexing Time | Not provided |
| Sub-Spindle Speed (RPM) | Not provided |
| Rapid Traverse X & Z | 1181 IPM |
| RPM | Not provided |
| Number Of Tool Stations | Not provided |
| Turret Tool Size | Not provided |
| Turret Configuration 1 | Not provided |
| Turret Configuration 2 | Not provided |
| Mount | Not provided |
| Rapid Traverse Rates X Z Y | 1181 IPM |
| Tool Turret Or Tool Post | Not provided |
| Z-Axis Travel | 32.7" |
| Distance Between Centers | Not provided |
| Approx Machine Weight | 16,100 LBS. |
| # Turret Stations | Not provided |
| Maximum Machining Diameter | Not provided |
| Maximum I.D. Tool Size | Not provided |
| Spindle Bore/Spindle Bar | 3.34" |
| Diameter At The Nose | Not provided |
| Turret Rotary Tool Speeds 1 | 5000 RPM |
| Draw Tube I.D. | Not provided |
| Bar | 3" |
| Spindle Speeds | 4000-4500 RPM |
| Max Rotation Speed | Not provided |
| Axis | Not provided |
| Ac Spindle Motor (30 Min.) | Not provided |
| Horsepower Of Mill Spindle | Not provided |
| C Axis Index | Not provided |
| Spindle Bar Capacity | 3" |
| B-Axis Feedrate | Not provided |
| Max Distance Between Centers | Not provided |
| Approx. Machine Weight | 16,100 LBS. |
| Y-Axis Feedrate | Not provided |
| Tool Magazine Capacity | Not provided |
| Bar Capacity | 3" |
| B - Axis Milling Spindle Taper | Not provided |
| Spindle Horsepower 2 | 11 HP |
| Spindles | Not provided |
| Z1-Axis Travels | 32.7" |
| Y-Axis Travels | 4.1" |
| X Axis Rapid Traverse | 1181 IPM |
| B-Axis | Not provided. |
Do you have a Doosan 2600SY to sell?
<p>We are actively seeking a 2018 Doosan 2600SY CNC Lathe. This advanced metal cutting machine is renowned for its versatility and precision, making it an ideal asset for any machining operation. With a swing over bed of 30.7 inches and a turning diameter of 14.8 inches, the Doosan 2600SY is capable of handling a variety of workpieces. It features a dual chuck setup with sizes of 10 inches and 8 inches, allowing for efficient part loading and increased productivity.</p> <p>The Doosan 2600SY boasts impressive specifications that enhance its performance.
With a turning length of 29.9 inches, this machine is designed for both large and small components. It operates at spindle speeds of up to 4000 RPM and 4500 RPM, powered by a robust 30 HP spindle for heavy-duty tasks and an additional 11 HP spindle for lighter operations. The machine's weight of 16,100 lbs contributes to its stability and precision during operation, ensuring high-quality results for your machining needs.</p> <p>Sellers often part with machines like the Doosan 2600SY for various reasons, including upgrading to newer models, downsizing operations, or closing facilities. As a result, high-quality used machines become available for buyers looking to enhance their production capabilities.
At Superior Machine Tools, we specialize in purchasing CNC machines nationwide, ensuring that sellers can easily transition their equipment while receiving fair value for their assets.</p> <p>We offer fast payments and handle all logistics involved in the sale, making the process seamless for sellers. If you have a 2018 Doosan 2600SY or any other CNC machine you are looking to sell, we invite you to reach out to us today. Our dedicated team is ready to assist you in getting the best deal for your equipment.</p>
Frequently Asked Questions
What types of machinery and equipment do you purchase?
MTE buys a wide range of used and surplus machinery, including CNC machines, metalworking and fabrication equipment, industrial robots, inspection and testing systems, and material handling assets from industries such as metals manufacturing, oil and gas, automotive, and mining.
How does MTE assess the value of my surplus equipment?
Our team conducts a thorough review using current market data, equipment specifications, age, and condition. We provide fair market valuations given your specific situation to ensure you receive maximum value for your assets.
What is the process for selling my excess machinery to MTE?
We make it simple: contact us with asset details, and our specialists will review and coordinate an inspection if needed. After finalizing terms, we handle all logistics, removal, and payment for a smooth and efficient transaction.
How quickly can MTE complete the purchase and removal of my surplus equipment?
MTE prioritizes safe and efficient equipment removal, adhering to your company's specific requirements and timeframes. We coordinate all logistics to ensure the process is carried out safely and efficiently, minimizing risks and protecting both personnel and equipment.
What documentation is required to sell my used machinery?
We typically request detailed equipment information, such as make, model, year, and maintenance records, along with proof of ownership. Our team will guide you through all necessary paperwork to ensure a secure and transparent transaction.
Where is MTE located, and do you offer services outside Michigan?
While MTE is proudly based in Michigan, our services extend across the entire United States and internationally. No matter where your surplus machinery or equipment is located, our team has the experience and logistics capabilities to manage evaluations, purchases, and removals efficiently.
Is MTE an equipment broker?
No. Our business model is based on purchasing equipment outright — MTE does not act as a broker nor do we buy on consignment. We buy machinery and assets upfront, providing immediate payment and a straightforward transaction.
Related Machines
“Selling my CNC machine with MTE was seamless. The team guided me through every step and offered a fair price quickly.”
Michael Rodriguez
Plant Operations Manager
Have one to sell?
MTE is the direct buyer. Quote in 24-48 hours, free pickup, pay on collection.