Sell your DMG MORI NZX 2000/ 800STY3 2016 today.
DMG MORI NZX 2000/ 800STY3 Specifications
| Z Axis | 11.8"/31.9"/11.8" |
|---|---|
| Spindle | Main Spindle |
| Bed Width (Tailstock) | Sub Spindle |
| Chuck Type | Hydraulic |
| Max Turning Length | 31.8" |
| Turning Diameter | 31.8" |
| Distance Between Centers | 11.8"/31.9"/11.8" |
| Driven Tools | Yes |
| Y-Axis Travel | 4.3" |
| Weight (Approx.) | 21,120 LBS |
| Rapid Traverse Rate | Yes |
| Ball Screw Diameter (X) | 8.3" |
| Max Spindle Speed | 5,000 RPM |
| Swing Over Cross Slide | 31.5" |
| Bar Work Capacity | 2.6" |
| X2-Axis (Cross Travel Of Turret 2) | 8.3" |
| Travel (X) | 8.3" |
| Y-Axis Travel (Upper Turret Only) | 4.3" |
| X1/X2 Axis Travel | 8.3" |
| Tool Magazine | Yes |
| Max Od Turning Over Saddle | 31.8" |
| Max Cutting Diameter | 31.8" |
| Control | CNC (CELOS (F31IB)) |
| Right Spindle Travel | Sub Spindle |
| Ratio- 1 | 1 |
| Spindle Power | 33.3/30 |
| Upper Turret | 16 |
| Tailstock Quill Dia. | Sub Spindle |
| Cross Slide Travel | Yes |
| Live Tool Motor 5 Min/Cont | 7.0 |
| Power Source | Electric |
| Rapid Traverse Rate Xzb | Yes |
| Min Spindle Indexing | 1 |
| Curvic Coupling Tailstock Quill Diameter | Yes |
| X-Axis (Cross Travel Of Upper Turret) | 8.3" |
| Main Spindle Horsepower | 33.3/30 |
| Z1 & Z2-Axis Travels | 11.8"/31.9"/11.8" |
| Estimated Machine Weight | 21,120 LBS |
| Compound Slide Travel | Yes |
| Chuck | 10" |
| Y Axis | Upper and Lower Turrets |
| Tool Stations No. 1 | 16 |
| Number Of Axes | 2 |
| B Axis Travel | Yes |
| Rotary Tool Speed | 12000 |
| Headstock 2 Travel | Yes |
| Spindle Speeds | 5,000 RPM |
| Z-Axis | 11.8"/31.9"/11.8" |
| Approximate Dimensions | 199.3" X 111.6" X 91.3" |
| Shank Diameter For Boring Bar | Yes |
| Gear Ratio 1 | 1 |
| Turret Head (Type B) | 16 X 3 TURRETS |
| Spindle Bore | 2.9" |
| Live Tooling Motor | 7.0 |
| Tailstock (Y/N) | Yes |
| Shank Height For Square Tool | Yes |
| Tool Shank Size | Yes |
| Electrics | Yes |
| B-Axis Milling Speed | Yes |
| Max Machinable Center Distance | Yes |
| Tailstock Quill Diameter | Sub Spindle |
| Max Swing Diameter | 31.5" |
| No. Of Spindles | 2 |
| Max Swing | 31.5" |
| Max Swing Over Bed | 31.5" |
| Max Diameter Bar Capacity | 2.6" |
| Milling Motor | Yes |
| # Axis | 2 |
| Tailstock Base Stroke | Yes |
| Number Of Tool Stations | 16 |
| Z-Axis (Longitudinal Travel) | 11.8"/31.9"/11.8" |
| Tailstock Spindle Taper | Yes |
| Turret Capacity | 16 |
| Live Tool Milling Speed Range | 12000 |
| Main Motor | 33.3/30 |
| Standard Workpiece Diameter | Yes |
| Z-Axis (Longitudinal Travel Of Upper Turret) | 11.8"/31.9"/11.8" |
| Mass Of Machine | 21,120 LBS |
| Tool Holder (Approx.) | Yes |
| Spindle Motor Cont. | 33.3/30 |
| Turret Index (Single Step) | 16 |
| C2-Axis (Indexing Positions Of Sub Spindle) | Yes |
| Lower Turret Positions | 16 |
| Max Tailstock Position | Sub Spindle |
| Swing Over Carriage | 31.5" |
| C Axis Indexing | Yes |
| Approximate Machine Height | 91.3" |
| Sub Spindle Speed | 5,000 RPM |
| Floor Space | Yes |
| Turret | 16 X 3 TURRETS |
| Maximum Swing Over Carriage | 31.5" |
| Max Distance Between Spindle Nose | 11.8"/31.9"/11.8" |
| Max. Swing Over Bed | 31.5" |
| C-Axis Indexing | Yes |
| Sub Spindle Chuck Size | 10 |
| Machining Length | Yes |
| Travel | 11.8"/31.9"/11.8" |
| Live Tool Speed | 12000 |
| Tool Turret Positions | 16 |
| Coupling Size | Yes |
| Standard Turning Diameter | 31.8" |
| Turret Stations | 16 |
| Tailstock Spindle Travel | Sub Spindle |
| Sub Spindle Nose | Hydraulic |
| Turret Positions | 16 |
| B-Axis Tool Positions | Yes |
| Feed Motor (Z) | Yes |
| Swing Over Bed | 31.5" |
| Rapid Traverse Rate - Y-Axis | Yes |
| Rotary Tool Motor | 7.0 |
| B-Axis Spindle Motor | Yes |
| Rapid Traverse Rate - Z-Axis | Yes |
| Center Distance | 11.8"/31.9"/11.8" |
| Centre | Yes |
| Live Tool Spindle Motor | 7.0 |
| Rapid Traverse | Yes |
| Spindle Motor | 33.3/30 |
| Tool Turret | 16 X 3 TURRETS |
| X Axis Travel | 8.3" |
| Spindle Bearing Inner Diameter | Yes |
| Rapid Traverse Rate - X-Axis | Yes |
| Bed Width (Carriage) | Sub Spindle |
| Rotary Tool Spindle Speed | 12000 |
| Approximate Machine Weight | 21,120 LBS |
| Main Spindle Motor | 33.3/30 |
| Overall Dimensions | 199.3" X 111.6" X 91.3" |
| Approx Weight | 21,120 LBS |
| Max Speed | 5,000 RPM |
| Sub-Spindle Motor | 33.3/30 |
| Cutting Feedrate Y Axis | Yes |
| Turret Tool Positions | 16 |
| Rapid Rate X Axis | Yes |
| Built-In Tailstock Quill Stroke | Yes |
| Turret Index Time | 16 |
| Sub Spindle Bar Capacity | 2.6" |
| Travels (X,Z) | 8.3"/11.8"/31.9"/11.8" |
| Max Spindle Speed No.1 | 5,000 RPM |
| # Tool Turrets | 2 |
| Z-Axis Rapid Traverse Rate | Yes |
| Live Tooling | Yes |
| Tailstock Body Travel | Sub Spindle |
| Max Distance Between Centers | 11.8"/31.9"/11.8" |
| Turret 2 Tool Positions | 16 |
| Y-Axis (Travel Of Upper Turret) | 4.3" |
| Maximum Turning Length | 31.8" |
| Maximum Swing | 31.5" |
| Spindle Speed Range (1 RPM Increments) | 5,000 RPM |
| Power Consumption | Electric |
| Live / Static | Yes |
| Max Turning Dia | 31.8" |
| Bar Capacity | 2.6" |
| X2-Axis (Cross Travel Of Lower Turret) | 8.3" |
| C Axis | Yes |
| Main Spindle Speed | 5,000 RPM |
| Upper Turret Positions | 16 |
| Max Cutting / Turning Diameter | 31.8" |
| Spindle Inside Taper | Yes |
| Max Cross Travel | 8.3" |
| Maximum Cross Travel (X Axis) | 8.3" |
| Z-Axis (Longitudinal Travel Of Turret 1) | 11.8"/31.9"/11.8" |
| X-Axis | 8.3" |
| C-Axis (Indexing Positions Of Main Spindle) | Yes |
| Overall Dimensions (With Conveyor) | 199.3" X 111.6" X 91.3" |
| Rapid Traverse X Axis | Yes |
| Cutting Feedrate X Axis | Yes |
| Spindle Bearing Diameter | Yes |
| Swing Over Bed From Face Plate | 31.5" |
| Max Turning Length (Each Spindle) | 31.8" |
| Chip Conveyor | Yes |
| Slant Of Bed | Yes |
| X Axis | 8.3" |
| Power Requirement | Electric |
| Turret Tool Capacity | 16 |
| Rapid Rate Z Axis | Yes |
| Sub Spindle Motor | 33.3/30 |
| Tool Holder | Yes |
| Machine Weight (Approx) | 21,120 LBS |
| Max Turning Dia (Live/Turning Tools) | 31.8" |
| Jog Feedrate | Yes |
| Chuck Size | 10" |
| Cross Slide Inclination | Yes |
| No. Of Turrets | 2 |
| Z2-Axis (Longitudinal Travel Of Turret 2) | 11.8"/31.9"/11.8" |
| Hole Thru Spindle | Yes |
| C-Axis Index (Main & Sub) | Yes |
| Spindle Nose | Main Spindle |
| B Axis Spindle Two Travel | Yes |
| Max Cutting Length | 31.8" |
| Machine Weight | 21,120 LBS |
| Z-Axis (Vertical Turret Travel) | 11.8"/31.9"/11.8" |
| # Tool Stations | 16 |
| Spindle Drive Motor (30Min/Cont.) | 33.3/30 |
| Max Machining Length | 31.8" |
Do you have a DMG MORI NZX 2000/ 800STY3 to sell?
We are actively seeking a 2016 DMG MORI NZX 2000/800STY3, a highly versatile multi-axis CNC lathe that offers exceptional performance for complex machining tasks. This machine is equipped with the advanced CELOS (F31iB) control system, ensuring precision and ease of operation in your manufacturing processes. With a maximum swing of 31.5 inches and a max turning diameter of 31.8 inches, it provides the capability to handle a variety of workpieces with ease. The NZX 2000/800STY3 features twin spindles that can reach speeds of up to 5,000 RPM, allowing for efficient and rapid production.
It is designed with a robust main spindle bore diameter of 2.9 inches and a maximum bar capacity of 2.6 inches, making it suitable for a range of applications. The machine incorporates two sub spindles, each with a 10-inch chuck size and hydraulic chuck type, enhancing its operational flexibility. Furthermore, this model is equipped with three turrets, each offering 16 tool positions, ensuring that you can perform multiple operations without the need for frequent tool changes. The Y-axis travel of 4.3 inches on both upper and lower turrets adds to its versatility, allowing for intricate machining tasks that require high precision.
The high-pressure coolant system, with a capacity of 1,000 PSI, ensures optimal cooling during operations, prolonging tool life and improving surface finishes. At Superior Machine Tools, we recognize the value of your equipment. If you are looking to sell your 2016 DMG MORI NZX 2000/800STY3, we are here to help you get the best price. Contact us today to discuss your machine and receive a competitive offer!
Frequently Asked Questions
What types of machinery and equipment do you purchase?
MTE buys a wide range of used and surplus machinery, including CNC machines, metalworking and fabrication equipment, industrial robots, inspection and testing systems, and material handling assets from industries such as metals manufacturing, oil and gas, automotive, and mining.
How does MTE assess the value of my surplus equipment?
Our team conducts a thorough review using current market data, equipment specifications, age, and condition. We provide fair market valuations given your specific situation to ensure you receive maximum value for your assets.
What is the process for selling my excess machinery to MTE?
We make it simple: contact us with asset details, and our specialists will review and coordinate an inspection if needed. After finalizing terms, we handle all logistics, removal, and payment for a smooth and efficient transaction.
How quickly can MTE complete the purchase and removal of my surplus equipment?
MTE prioritizes safe and efficient equipment removal, adhering to your company's specific requirements and timeframes. We coordinate all logistics to ensure the process is carried out safely and efficiently, minimizing risks and protecting both personnel and equipment.
What documentation is required to sell my used machinery?
We typically request detailed equipment information, such as make, model, year, and maintenance records, along with proof of ownership. Our team will guide you through all necessary paperwork to ensure a secure and transparent transaction.
Where is MTE located, and do you offer services outside Michigan?
While MTE is proudly based in Michigan, our services extend across the entire United States and internationally. No matter where your surplus machinery or equipment is located, our team has the experience and logistics capabilities to manage evaluations, purchases, and removals efficiently.
Is MTE an equipment broker?
No. Our business model is based on purchasing equipment outright — MTE does not act as a broker nor do we buy on consignment. We buy machinery and assets upfront, providing immediate payment and a straightforward transaction.
Related Machines
“Selling my CNC machine with MTE was seamless. The team guided me through every step and offered a fair price quickly.”
Michael Rodriguez
Plant Operations Manager
Have one to sell?
MTE is the direct buyer. Quote in 24-48 hours, free pickup, pay on collection.