CNC Lathes

DMG MORI MR-2000 (1972)

Call 800-822-9524

Sell your DMG MORI MR-2000 1972 today.

MakeDMG MORI

ModelMR-2000

Year1972

CategoryCNC Lathes

ConditionUsed

DMG MORI MR-2000 Specifications

Other	Z Axis
Other	Spindle
Other	Bed Width (Tailstock)
Other	Chuck Type
Other	Max Turning Length
Other	Turning Diameter
Other	Distance Between Centers
Other	Driven Tools
Other	Y-Axis Travel
Other	Weight (Approx.)
Other	Rapid Traverse Rate
Other	Ball Screw Diameter (X)
Other	Max Spindle Speed
Other	Swing Over Cross Slide
Other	Bar Work Capacity
Other	X2-Axis (Cross Travel Of Turret 2)
Other	Rapid Traverse Z Axis
Other	Travel (X)
Other	Y-Axis Travel (Upper Turret Only)
Other	X1/X2 Axis Travel
Other	Tool Magazine
Other	Max Od Turning Over Saddle
Other	Max Cutting Diameter
Other	Control
Other	Right Spindle Travel
Other	Ratio- 1
Other	Spindle Power
Other	Upper Turet
Other	Rapid Traverse X/Z/B
Other	Tailstock Quill Dia.
Other	Cross Slide Travel
Other	Cutting Feedrate Z Axis
Other	Live Tool Motor 5 Min/Cont
Other	Power Source
Other	Rapid Traverse Rate Xzb
Other	Min Spindle Indexing
Other	Curvic Coupling Tailstock Quill Diameter
Other	X-Axis (Cross Travel Of Upper Turret)
Other	Main Spindle Horsepower
Other	Z1 & Z2-Axis Travels
Other	Estimated Machine Weight
Other	Rapid Traverse Rates (X&Z/Y)
Other	Compound Slide Travel
Other	Max
Other	Chuck
Other	Y Axis
Other	Rapid Traverse Y Axis
Other	Tool Stations No. 1
Other	Number Of Axes
Other	B Axis Travel
Other	Rotary Tool Speed
Other	Z Axis Travel
Other	Headstock 2 Travel
Other	Spindle Speeds
Other	Z-Axis
Other	Approximate Dimensions
Other	Shank Diameter For Boring Bar
Other	Main Spindle
Other	Gear Ratio 1
Other	Turret Head (Type B)
Other	X-Axis Travel (Turret 2)
Other	Spindle Bore
Other	Live Tooling Motor
Other	Tailstock (Y/N)
Other	Y-Axis
Other	Shank Height For Square Tool
Other	Tool Shank Size
Other	Electrics
Other	B-Axis Milling Speed
Other	Max Machinable Center Distance
Other	Approximate Machine Dimensions
Other	Tailstock Quill Diameter
Other	Swing Over Slide
Other	Max Bar Capacity
Other	Max. Distance Between Spindle Large Noses
Other	Tailstock Taper
Other	Max Swing Diameter
Other	No. Of Spindles
Other	Max Swing
Other	Max Swing Over Bed
Other	Max Diameter Bar Capacity
Other	Milling Motor
Other	# Axis
Other	Tailstock Base Stroke
Other	Number Of Tool Stations
Other	Z-Axis (Longitudinal Travel)
Other	Tailstock Spindle Taper
Other	Turret Capacity
Other	Live Tool Milling Speed Range
Other	Main Motor
Other	Standard Workpiece Diameter
Other	Z-Axis (Longitudinal Travel Of Upper Turret)
Other	Mass Of Machine
Other	Tool Holder (Approx.)
Other	Spindle Motor Cont.
Other	Turret Index (Single Step)
Other	C2-Axis (Indexing Positions Of Sub Spindle)
Other	Lower Turret Positions
Other	Milling
Other	Max Tailstock Position
Other	Swing Over Carriage
Other	C Axis Indexing
Other	Approximate Machine Height
Other	Rapid Rate Z Axis
Other	Sub Spindle Speed
Other	Floor Space
Other	Turret
Other	Max Distance Between Spindle Nose
Other	Maximum Swing Over Carriage
Other	Max. Swing Over Bed
Other	C-Axis Indexing
Other	Sub Spindle Chuck Size
Other	Machining Length
Other	Travel
Other	Live Tool Speed
Other	Tool Turret Positions
Other	Coupling Size
Other	Standard Turning Diameter
Other	Turret Stations
Other	Tailstock Spindle Travel
Other	Sub Spindle Nose
Other	Turret Positions
Other	B-Axis Tool Positions
Other	Feed Motor (Z)
Other	Swing Over Bed
Other	Rapid Traverse Rate - Y-Axis
Other	Rotary Tool Motor
Other	B-Axis Spindle Motor
Other	Travel (Z)
Other	Rapid Traverse Rate - Z-Axis
Other	Center Distance
Other	Centre
Other	Live Tool Spindle Motor
Other	Rapid Traverse
Other	Spindle Motor
Other	Tool Turret
Other	X Axis Travel
Other	Spindle Bearing Inner Diameter
Other	Rapid Traverse Rate - X-Axis
Other	Bed Width (Carriage)
Other	Rotary Tool Spindle Speed
Other	Approximate Machine Weight
Other	Main Spindle Motor
Other	Overall Dimensions
Other	Approx Weight
Other	Max Speed
Other	Sub-Spindle Motor
Other	Cutting Feedrate Y Axis
Other	Turret Tool Positions
Other	X-Axis (Cross Travel)
Other	Spindle Nose Main/Sub
Other	Quill Stroke
Other	Tailstock Quill Dia
Other	Standard Cutting Tool
Other	Z1 Axis Travel
Other	Max. Turning Diameter
Other	Milling Spindle Speed
Other	Max Swing Over Carriage
Other	Live Tool Motor
Other	Hydraulic Tailstock Taper
Other	Dimensions
Other	Feed Motor (X)
Other	Max Turning Diameter
Other	B-Axis Travel
Other	Distance Between Spindles
Other	Max. Spindle Speed
Other	Max Speed Driven Tools
Other	Standard Chuck Size
Other	Max RPM
Other	Max. Swing Over Cross Slide
Other	Spindle Motor (Main)
Other	Machine Weight
Other	Z-Axis (Vertical Turret Travel)
Other	# Tool Stations
Other	Spindle Drive Motor (30Min/Cont.)
Other	Max Machining Length
Other	Jog Feedrate
Other	Chuck Size
Other	Cross Slide Inclination
Other	No. Of Turrets
Other	Z2-Axis (Longitudinal Travel Of Turret 2)
Other	Hole Thru Spindle
Other	C-Axis Index (Main & Sub)
Other	Spindle Nose
Other	B Axis Spindle Two Travel
Other	Max Cutting Length
Other	Sub Spindle Motor
Other	Tool Holder
Other	Machine Weight (Approx)
Other	Max Turning Dia (Live/Turning Tools)
Other	Chip Conveyor
Other	Slant Of Bed
Other	X Axis
Other	Power Requirement
Other	Turret Tool Capacity
Other	Rapid Rate X Axis
Other	Built-In Tailstock Quill Stroke
Other	Turret Index Time
Other	Sub Spindle Bar Capacity
Other	Travels (X,Z)
Other	Max Spindle Speed No.1
Other	# Tool Turrets
Other	Z-Axis Rapid Traverse Rate
Other	Live Tooling
Other	Tailstock Body Travel
Other	Max Distance Between Centers
Other	Turret 2 Tool Positions
Other	Y-Axis (Travel Of Upper Turret)
Other	Maximum Turning Length
Other	Maximum Swing
Other	Spindle Speed Range (1 RPM Increments)
Other	Power Consumption
Other	Live / Static
Other	Max Turning Dia
Other	Bar Capacity
Other	X2-Axis (Cross Travel Of Lower Turret)
Other	C Axis
Other	Main Spindle Speed
Other	Upper Turret Positions
Other	Max Cutting / Turning Diameter
Other	Spindle Inside Taper
Other	Max Cross Travel
Other	Maximum Cross Travel (X Axis)
Other	Z-Axis (Longitudinal Travel Of Turret 1)
Other	X-Axis
Other	C-Axis (Indexing Positions Of Main Spindle)
Other	Overall Dimensions (With Conveyor)
Other	Rapid Traverse X Axis
Other	Cutting Feedrate X Axis
Other	Spindle Bearing Diameter
Other	Swing Over Bed From Face Plate
Other	Max Turning Length (Each Spindle)
Spindle	Not Found

Do you have a DMG MORI MR-2000 to sell?

We are actively seeking a 1972 Mori Seiki MR-2000 Engine Lathe. This classic CNC lathe is renowned for its durability and precision, making it an invaluable asset in any machining environment. The MR-2000 is designed to handle a variety of turning applications with ease, showcasing Mori Seiki's commitment to engineering excellence. With a robust construction and reliable performance, this model has stood the test of time, proving its worth in both production and prototype settings. The MR-2000 features a powerful spindle that can accommodate a wide range of materials, allowing for versatile machining options.

Operators appreciate its user-friendly controls and efficient design, which contribute to high productivity levels. Additionally, the lathe's compact footprint makes it an excellent choice for shops with limited space, without compromising on capability. As we continue to expand our inventory, we are particularly interested in acquiring the Mori Seiki MR-2000. If you have this model, we invite you to reach out to us. Our team of experts is ready to provide you with a fair and competitive offer.

We understand the value of your equipment and strive to make the selling process as seamless as possible. Whether you're upgrading to newer technology or simply looking to declutter your shop, we can assist you every step of the way. Don't miss the opportunity to sell your 1972 Mori Seiki MR-2000 Engine Lathe to a trusted buyer. Contact Superior Machine Tools today to get started and receive your personalized quote. Let us help you turn your machinery into cash!

Frequently Asked Questions

What types of machinery and equipment do you purchase?

MTE buys a wide range of used and surplus machinery, including CNC machines, metalworking and fabrication equipment, industrial robots, inspection and testing systems, and material handling assets from industries such as metals manufacturing, oil and gas, automotive, and mining.

How does MTE assess the value of my surplus equipment?

Our team conducts a thorough review using current market data, equipment specifications, age, and condition. We provide fair market valuations given your specific situation to ensure you receive maximum value for your assets.

What is the process for selling my excess machinery to MTE?

We make it simple: contact us with asset details, and our specialists will review and coordinate an inspection if needed. After finalizing terms, we handle all logistics, removal, and payment for a smooth and efficient transaction.

How quickly can MTE complete the purchase and removal of my surplus equipment?

MTE prioritizes safe and efficient equipment removal, adhering to your company's specific requirements and timeframes. We coordinate all logistics to ensure the process is carried out safely and efficiently, minimizing risks and protecting both personnel and equipment.

What documentation is required to sell my used machinery?

We typically request detailed equipment information, such as make, model, year, and maintenance records, along with proof of ownership. Our team will guide you through all necessary paperwork to ensure a secure and transparent transaction.

Where is MTE located, and do you offer services outside Michigan?

While MTE is proudly based in Michigan, our services extend across the entire United States and internationally. No matter where your surplus machinery or equipment is located, our team has the experience and logistics capabilities to manage evaluations, purchases, and removals efficiently.

Is MTE an equipment broker?

No. Our business model is based on purchasing equipment outright — MTE does not act as a broker nor do we buy on consignment. We buy machinery and assets upfront, providing immediate payment and a straightforward transaction.