Haas HRT160

What the maker published about the Haas HRT160

Haas Automation's page for the HRT160 lists Platter Diameter at 6.30 in (160 mm), with Number of Std T-Slots at 6 @ 60°. The page also lists Max Weight on Platter (w/support) at 90 lb (40.8 kg) and Max Weight on Platter (unsupported) at 45 lb (20.4 kg). The sheet gives Max Speed at 130 °/sec, Max Torque at 150 ft-lbf (203 Nm) and Brake Torque @ 100 psi/6.9 bar at 100 ft-lbf (136 Nm). The specs state Gear Ratio as 63:1, Timing as 2:1 and Worm Gear Dia as 4.7 in (119 mm). The page lists Power Requirement at 115 VAC ± 10% @ 15 A, and Air Pressure Max at 150 psi (10.3 bar). The page says a rotary control box is used when the machine runs on its own, without a Haas mill drive.

Source: Haas Automation, an archived copy of the maker's page from 2021, November 2, 2026.

When the Haas HRT160 was built

Haas Automation's page for the HRT160 was captured by the Wayback Machine in October 2021, so the model was in production by 2021.

Source: Haas Automation, an archived copy of the maker's page from 2021, November 2, 2026.

Haas HRT160 listing history

Where it was listed

Model years seen

2012, 2008.

Looking for a Haas HRT160 for sale?

We have tracked 4 Haas HRT160 listings on 4 marketplaces (cncmachines.com, equipt.com, machinestation.us and surplusrecord.com), model years 2008 to 2012. We buy Haas HRT160 machines and do not sell them.

2012 · 2008

Every Haas HRT160 we have tracked

2 more listings, no year.

The Haas HRT160 among machines

Browse all Metal Cutting, or see every Haas machine we track.

Other Metal Cutting models in this directory