Haas EC-1600

What the maker publishes about the current Haas EC-1600

The EC-1600 is a horizontal machining center in the Haas EC Series, set up for large parts on a 50-taper spindle. Its X axis travels 64.00 in, Y travels 50.00 in and Z travels 32.00 in. Parts go onto a T-slot table of 64.0 in by 36.0 in rated for 10000 lb. A 2-speed gearbox drives the CT or BT 50 spindle to 7500 rpm at 30.0 hp, with 340.0 ft-lbf of torque at 700 rpm. The side-mount changer holds 50+1 tools, including tools up to 20.00 in long and 30.0 lb in weight. With the adjacent pockets empty, a tool of 10.0 in diameter fits. Rapids on the linear axes reach 600 ipm. As an option, a rotary platter 30.00 in across sits inside the table as a 4th axis, turning a full 360° with a part swing of 50.0 in, so four faces of a workpiece or tombstone can be reached.

Source: Haas Automation, Inc., September 27, 2026.

What the Haas EC-1600 is used for

Haas pitches the EC-1600 and the rest of its EC Series at large parts, up to 10,000 lb on the table; an optional 4th-axis platter set into the T-slot table reaches four sides of a part or a tombstone.

Source: Haas Automation, October 14, 2026.

Haas EC-1600 specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 14, 2026.

What fits a Haas EC-1600

Each of these follows from a published specification above, which is named beside it.

Haas EC-1600 equipment and options

Standard on a new Haas EC-1600

• Chip conveyor
• Rigid tapping

Optional on a new Haas EC-1600

• Through-spindle coolant

Source: Haas Automation, October 14, 2026.

What to check on a Haas EC-1600

• Spindle. The manufacturer gives a spindle speed of 7500 rpm. Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 22.4 kW (30.0 hp) of spindle power and 460.0 Nm @ 700 rpm (340.0 ft-lbf @ 700 rpm) of spindle torque. Take a heavy cut and watch the load meter.
• Spindle taper. The manufacturer gives a spindle taper of CT or BT 50. Check it for fretting and that the drawbar holds a tool.
• Axes and way covers. The manufacturer gives X 1626 mm (64.00 in), Y 1270 mm (50.00 in) and Z 813 mm (32.00 in) of travel. Run each axis end to end and check the way covers.
• Rapids and ballscrews. The manufacturer gives a rapid traverse of 15.2 m/min (600 ipm). Measure the backlash on each axis.
• Tool changer. The manufacturer gives the tool capacity as 50+1. Cycle every pocket and watch for a hesitation.
• Tool-change time. The manufacturer gives a tool-to-tool time of 8.00 s and a chip-to-chip time of 12.60 s. Time a tool change against that.
• Table. The manufacturer gives a table load of 4536 kg (10000 lb). Check the table and its T-slots for damage.

Haas EC-1600 listing history

Where it was listed

Filed under CNC Horizontal Machining Centers (HMC) (5) and CNC Horizontal Boring Mills (2).

Model years seen

2021 ×3, 2018 ×2, 2014 ×3, 2013, 2012 ×5, 2011 ×2, 2010 ×2, 2009 ×2, 2008, 2007 ×4, 2006, 2005, 2004 ×3.

What Haas EC-1600 listings agree on

What affects the value of a used Haas EC-1600

• Options. The units we tracked split on spindle speed (6,000 RPM on 4 machines, 7,500 RPM on 2 machines).
• Build year. The units we tracked were built from 2004 to 2021, across 13 model years, most often 2012 (5 units).
• Against the published figures. The manufacturer gives max spindle speed 7500 rpm, spindle motor power 22.4 kW (30.0 hp), tool capacity 50+1 and X-axis travel 1626 mm (64.00 in).

Looking for a Haas EC-1600 for sale?

We have tracked 33 Haas EC-1600 listings on 9 marketplaces (surplusrecord.com, equipt.com, revelationmachinery.com, cncmachines.com, machinetools.com, premierequipment.com, usedcnc.com, gaec.com and machnet.com), model years 2004 to 2021. We buy Haas EC-1600 machines and do not sell them.

2021 · 2021 · 2021 · 2018 · 2018 · 2014 · 2014 · 2014 · 2013 · 2012 · 2012 · 2012 · 2012 · 2012 · 2011 · 2011 · 2010 · 2010 · 2009 · 2009 · 2008 · 2007 · 2007 · 2007 · 2007 · 2006 · 2005 · 2004 · 2004 · 2004 · year not given

Every Haas EC-1600 we have tracked

7 more Haas EC-1600 machines

2 more listings, no year.

The Haas EC-1600 among machining centers and mills

Browse all CNC Horizontal Machining Centers (HMC), or see every Haas machine we track.

Models related to the Haas EC-1600

1. Haas EC-400: manufacturer specification page, fetched October 14, 2026.
2. Haas EC-1600: manufacturer specification page, fetched October 14, 2026.