Doosan PUMA 2600SYII

What the maker publishes about the current Doosan PUMA 2600SYII

DN Solutions places the PUMA 2600SY II in its PUMA line of Y-axis horizontal turning centers, as the version that pairs a Y-axis with a sub spindle. The main spindle carries a 10 inch chuck. Parts can be turned up to 376 mm in diameter and 760 mm in length. Axis strokes are 260 mm in X, 105 mm in Y and 830 mm in Z. X and Z each rapid at 30 m/min. On the main spindle, top speed is 4000 r/min, with 22 kW of power and 599 N·m of torque. The sub spindle runs to 6000 r/min on 15 kW. A 12-station turret holds the tools, and its rotary tools spin at up to 5000 r/min. The machine weighs 6550 kg and measures 3560 mm long by 1945 mm wide.

Source: DN Solutions, September 27, 2026.

What the Doosan PUMA 2600SYII is used for

DN Solutions pitches its PUMA 2100, 2600 and 3100 turning centers at work ranging from plain turned parts to parts in hard-to-machine materials finished in a single setup, and names Y-axis milling of shaped features on the Y models, the 2600SY II among them.

Source: DN Solutions, October 14, 2026.

Doosan PUMA 2600SYII specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 14, 2026.

What fits a Doosan PUMA 2600SYII

Each of these follows from a published specification above, which is named beside it.

Doosan PUMA 2600SYII equipment and options

Options on the 16 Doosan PUMA 2600SYII units we tracked

• Sub-spindle 4 of 16
• Parts catcher 2 of 16
• Chip conveyor 2 of 16

What to check on a Doosan PUMA 2600SYII

• Spindle. The manufacturer gives a spindle speed of 4000 r/min. Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 22 kW (29 hp) of spindle power and 599 N·m (442 ft-lb) of spindle torque. Take a heavy cut and watch the load meter.
• Axes and way covers. The manufacturer gives X 260 mm (10 inch), Y 105 mm (4 inch) and Z 830 mm (33 inch) of travel. Run each axis end to end and check the way covers.
• Rapids and ballscrews. The manufacturer gives a rapid traverse of 30 m/min (1181 ipm). Measure the backlash on each axis.
• Turret. The manufacturer gives the turret stations as 12. Index every station and time a full turn.
• Chuck and bar. The manufacturer gives a chuck size of 10 inch. Check the jaws and the grip pressure.
• Bed and ways. The manufacturer gives a max turning diameter of 376 mm (15 inch) and a max turning length of 760 mm (30 inch). Check the ways for wear near the chuck.
• Rotary tools. The manufacturer gives the rotary tooling as 5000 r/min. Check that the rotary tools still drive under load.
• Second spindle. The manufacturer gives a sub spindle: max. spindle speed of 6000 r/min. Check that it synchronizes on a part transfer.
• Rigging and floor. The manufacturer gives a machine weight of 6550 kg (14440 lb), a machine length of 3560 mm (140 inch), a machine width of 1945 mm (77 inch) and a machine height of 2163 mm (85 inch). Confirm the rigging route and the floor will take that.

Doosan PUMA 2600SYII listing history

Where it was listed

Filed under CNC Multi-Tasking Machines (Mill-Turn / Turn-Mill) (8), CNC Lathes (6) and CNC Turning Centers (2).

Model years seen

2023, 2022 ×5, 2021 ×4, 2020 ×3, 2018 ×4, 2017 ×3.

What Doosan PUMA 2600SYII listings agree on

What affects the value of a used Doosan PUMA 2600SYII

• Options. The units we tracked split on chuck size (10 in on 5 machines, 12 in on 2 machines) and turret stations (12 on 2 machines, 24 on 2 machines).
• Build year. The units we tracked were built from 2017 to 2023, across 6 model years, most often 2022 (5 units).
• Against the published figures. The manufacturer gives max spindle speed 4000 r/min, spindle motor power 22 kW (29 hp), turret stations 12 and chuck size 10 inch.

Looking for a Doosan PUMA 2600SYII for sale?

We have tracked 20 Doosan PUMA 2600SYII listings on 6 marketplaces (quickmachinerysales.com, surplusrecord.com, usedcnc.com, exapro.com, gaec.com and machinetools.com), model years 2017 to 2023. We buy Doosan PUMA 2600SYII machines and do not sell them.

2023 · 2022 · 2022 · 2022 · 2022 · 2021 · 2021 · 2021 · 2020 · 2020 · 2018 · 2018 · 2018 · 2017 · 2017 · 2017

Every Doosan PUMA 2600SYII we have tracked

The Doosan PUMA 2600SYII among lathes and turning centers

Browse all CNC Multi-Tasking Machines (Mill-Turn / Turn-Mill), or see every Doosan machine we track.

Models related to the Doosan PUMA 2600SYII

1. Doosan PUMA 400LC: archived manufacturer spec sheet (PDF) (a copy held on a third-party site, recorded in our sourcing record rather than linked), fetched September 16, 2026.
2. Doosan PUMA 2600SYII: manufacturer specification page, fetched October 14, 2026.
3. Doosan PUMA 4100B: manufacturer specification page, fetched October 14, 2026.