Doosan LYNX 2100A

What the maker publishes about the current Doosan LYNX 2100A

The Lynx 2100A belongs to the compact 2-axis horizontal Lynx 2100/2600 series from DN Solutions and takes a 6 inch chuck. Turning reaches 350 mm (14 inch) in diameter. The cut can run 330 mm (13 inch) along the part. The X-axis has 205 mm of travel. Z travel is 340 mm. X rapids at 30 m/min, while Z rapids at 36 m/min. In imperial terms those rates are 1181 ipm and 1417 ipm. Top spindle speed is 6000 r/min. A 15 kW (20 hp) motor turns it. Peak spindle torque is 127 N·m, equal to 94 ft-lb. A servo drives the 12-station turret. Full covers over the slideways keep leakage and chips out. Lubrication is by grease. A dual-purpose chip conveyor mounts at the rear. The machine takes up 2320 mm by 1595 mm of floor and is 1693 mm tall. Weight totals 3100 kg (6834 lb).

Source: DN Solutions, September 27, 2026.

Doosan LYNX 2100A specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 14, 2026.

What fits a Doosan LYNX 2100A

Each of these follows from a published specification above, which is named beside it.

What to check on a Doosan LYNX 2100A

• Spindle. The manufacturer gives a spindle speed of 6000 r/min. Run the spindle to top speed and listen for bearing noise.
• Spindle load. The manufacturer gives 15 kW (20 hp) of spindle power and 127 N·m (94 ft-lb) of spindle torque. Take a heavy cut and watch the load meter.
• Axes and way covers. The manufacturer gives X 205 mm (8 inch) and Z 340 mm (13 inch) of travel. Run each axis end to end and check the way covers.
• Rapids and ballscrews. The manufacturer gives a rapid traverse of X-Axis Rapid Traverse 30 m/min (1181 ipm), Z-Axis Rapid Traverse 36 m/min (1417 ipm). Measure the backlash on each axis.
• Turret. The manufacturer gives the turret stations as 12. Index every station and time a full turn.
• Chuck and bar. The manufacturer gives a chuck size of 6 inch. Check the jaws and the grip pressure.
• Bed and ways. The manufacturer gives a max turning diameter of 350 mm (14 inch) and a max turning length of 330 mm (13 inch). Check the ways for wear near the chuck.
• Rigging and floor. The manufacturer gives a machine weight of 3100 kg (6834 lb), a machine length of 2320 mm (91 inch), a machine width of 1595 mm (63 inch) and a machine height of 1693 mm (67 inch). Confirm the rigging route and the floor will take that.

Doosan LYNX 2100A listing history

Where it was listed

Filed under CNC Lathes (7).

Model years seen

2022 ×2, 2021, 2020, 2018 ×2, 2017 ×2, 2016 ×2.

What Doosan LYNX 2100A listings agree on

What affects the value of a used Doosan LYNX 2100A

• Build year. The units we tracked were built from 2016 to 2022, across 6 model years.
• Against the published figures. The manufacturer gives max spindle speed 6000 r/min, spindle motor power 15 kW (20 hp), turret stations 12 and chuck size 6 inch.

Looking for a Doosan LYNX 2100A for sale?

We have tracked 12 Doosan LYNX 2100A listings on 5 marketplaces (surplusrecord.com, exapro.com, usedcnc.com, machinetools.com and theequipmenthub.com), model years 2016 to 2022. We buy Doosan LYNX 2100A machines and do not sell them.

2022 · 2022 · 2021 · 2020 · 2018 · 2018 · 2017 · 2016

Every Doosan LYNX 2100A we have tracked

2 more listings, no year.

The Doosan LYNX 2100A among lathes and turning centers

Browse all CNC Lathes, or see every Doosan machine we track.

Doosan LYNX 2100A variants and related models

Other CNC Lathes models in this directory

1. Doosan Puma GT3100: manufacturer specification page, fetched October 14, 2026.
2. Doosan LYNX 2100A: manufacturer specification page, fetched October 14, 2026.
3. Doosan SMX 3100LS: manufacturer specification page, fetched October 14, 2026.
4. Doosan PUMA 4100B: manufacturer specification page, fetched October 14, 2026.