DMG MORI NH4000 DCG

What the maker publishes about the current DMG MORI NH4000 DCG

DMG MORI lists the NH 4000 DCG in its NH Series of horizontal machining centers. Travel is 22 in. on both X and Y, with 24.8 in. on Z. Parts up to 24.8 in. in diameter, 35.4 in. tall and 881.8 lbs. fit the work zone. The rotary axis runs on a direct drive motor. The machine stands 106.7 in. high on a footprint of 94.4 by 157.6 in. MAPPS on Fanuc is the listed control. Its MAPPS X interface uses a vertical screen with up to 10 windows, plus 3D collision checking and machining simulation. Two operation panels appear on the page: the ERGO line X with a 24-inch multitouch screen, and the SLIM line III with a 15-inch multitouch screen. The CELOS X software platform connects the machine to plant systems. It exports machine data in OPC UA, MTConnect and MQTT formats. Remote diagnostics and remote maintenance run through the NET service.

Source: DMG MORI, September 27, 2026.

What the DMG MORI NH4000 DCG is used for

Mori Seiki's launch release aimed the NH4000 DCG at mixed work in small and medium lots, naming automotive, electronics and aerospace parts, and gave it a 14,000 rpm spindle and 50,000 mm/min rapid traverse.

Source: Mori Seiki (now DMG MORI), October 27, 2026.

DMG MORI NH4000 DCG specifications

Figures as currently published; an older unit may differ in control generation and options.

1. manufacturer specification page, fetched October 14, 2026.

What to check on a DMG MORI NH4000 DCG

• Control. The manufacturer gives MAPPS Fanuc as the control choices for this model. Confirm which one the unit carries.
• Axes and way covers. The manufacturer gives X 560 mm (22 in.), Y 560 mm (22 in.) and Z 630 mm (24.8 in.) of travel. Run each axis end to end and check the way covers.
• Work envelope. The manufacturer gives max. workpiece diameter 630 mm (24.8 in.), max. workpiece height 900 mm (35.4 in.) and max. workpiece weight 400 kg (881.8 lbs.). Measure your largest part, with its fixture, against that.

DMG MORI NH4000 DCG control and manuals

• Control & software alternatives MAPPS Fanuc

DMG MORI announced its my DMG MORI customer portal in 2019, first in Europe, as the place where registered customers find the operating instructions and service records for their machines.

Source: DMG MORI, October 24, 2026.

When the DMG MORI NH4000 DCG was built

Mori Seiki introduced the NH4000 DCG horizontal machining center in a news release dated August 28, 2003.

Source: Mori Seiki (now DMG MORI), October 27, 2026.

DMG MORI NH4000 DCG listing history

Where it was listed

Filed under CNC Horizontal Machining Centers (HMC) (15) and CNC Vertical Machining Centers (VMC) (1).

Model years seen

2013 ×2, 2012, 2011 ×4, 2010 ×4, 2009, 2008 ×5, 2007 ×4, 2006 ×3, 2005 ×3, 2004 ×4.

What DMG MORI NH4000 DCG listings agree on

What affects the value of a used DMG MORI NH4000 DCG

• Options. The units we tracked split on spindle speed (14,000 RPM on 11 machines, 12,000 RPM on 2 machines), spindle power (25 hp on 13 machines, 15 kW on 2 machines), spindle taper (CAT 40 on 7 machines, HSK-A63 on 2 machines) and tool capacity (60 on 8 machines, 40 on 2 machines).
• Control. The manufacturer lists MAPPS Fanuc as control choices for this model.
• Build year. The units we tracked were built from 2004 to 2013, across 10 model years, most often 2008 (5 units).
• Against the published figures. The manufacturer gives X-axis travel 560 mm (22 in.), Y-axis travel 560 mm (22 in.) and Z-axis travel 630 mm (24.8 in.).

Looking for a DMG MORI NH4000 DCG for sale?

We have tracked 32 DMG MORI NH4000 DCG listings on 7 marketplaces (usedcnc.com, exapro.com, machinetools.com, surplusrecord.com, cncmachines.com, machnet.com and revelationmachinery.com), model years 2004 to 2013. We buy DMG MORI NH4000 DCG machines and do not sell them.

2013 · 2013 · 2012 · 2011 · 2011 · 2011 · 2011 · 2010 · 2010 · 2010 · 2009 · 2008 · 2008 · 2008 · 2008 · 2007 · 2007 · 2007 · 2007 · 2006 · 2006 · 2006 · 2005 · 2005 · 2004 · 2004 · 2004 · 2004

Every DMG MORI NH4000 DCG we have tracked

4 more DMG MORI NH4000 DCG machines

1 more listing gave the early year left out above.

The DMG MORI NH4000 DCG among machining centers and mills

Browse all CNC Horizontal Machining Centers (HMC), or see every DMG MORI machine we track.

Models related to the DMG MORI NH4000 DCG

Other CNC Horizontal Machining Centers (HMC) models in this directory

1. DMG MORI NHX4000: manufacturer specification page, fetched October 14, 2026.
2. DMG MORI NH4000 DCG: manufacturer specification page, fetched October 14, 2026.
3. DMG MORI NHX5000: manufacturer specification page, fetched October 14, 2026.
4. Haas EC-400: manufacturer specification page, fetched October 14, 2026.