CNC Vertical Machining Centers (VMC)
Brother SPEEDIO W1000XD2
3 Brother SPEEDIO W1000XD2 listings have come through the used market we track: 2 marketplaces, built 2022–2024.
39.4 inX-axis travel
500 mmY-axis travel
15 inZ-axis travel
What the maker publishes about the current Brother SPEEDIO W1000XD2
The SPEEDIO W1000Xd2 is a wide travel BT30 compact machining center from Brother, with strokes of 39.4 in on X, 19.7 in on Y and 15.0 in on Z. Its 43.3 x 19.7 in work area carries 661 lb under a uniform load, or 1,102 lb once a parameter setting is changed, and the spindle nose stands 5.9 to 20.9 in above the table top. The No. 30 taper spindle reaches 12,000 min-1 in standard form; Brother's page lists optional 20,000 min-1 and 10,000 min-1 high torque versions and notes that a 16,000 min-1 version was discontinued in June 2026. Brother lists 14, 21 and 28 tool magazines, and a tool to tool change takes 0.6 s with the two smaller ones and 0.7 s with the largest. Rapids reach 1,969 ipm across X and Y and 2,205 ipm in Z, and cutting feed goes up to 1,181 ipm. Brother's CNC-D00 runs the machine, which weighs 7,385 lb.
Source: Brother Industries, Ltd., October 28, 2026.
What the Brother SPEEDIO W1000XD2 is used for
Brother's page aims the W1000Xd2 at big workpieces, batches of small parts cut together and short runs of mixed parts on jigs set side by side, and shows aluminum battery boxes, EV frames and shower plates cut on it.
Source: Brother Industries, Ltd., October 28, 2026.
Brother SPEEDIO W1000XD2 specifications
Manufacturer specification. Read from the manufacturer’s published specification and checked against it word for word.
Figures as currently published; an older unit may differ in control generation and options.
Capacity and travels
X-axis travelTravels X axis
1,000 mm
Y-axis travelTravels Y axis
500 mm
Z-axis travelTravels Z axis
380 mm
Spindle and speed
Max spindle speedSpindle speed
12,000 min-1standard; 20,000 and 10,000 high-torque optional (16,000 min-1 version discontinued June 2026)
Spindle motor powerMain spindle motor (10 min/continuous)
10.1/7.0 kW12,000 min-1 spindle, 10 min / continuous
Spindle taperTapered hole
7/24 tapered No.30
Rapid traverseRapid traverse rate (XYZ-area)
50 x 50 x 56 m/min
Table, turret and tools
Table sizeWork area size
1,100 x 500 mm
Max table loadMax.loading capacity (uniform load)
300 [500] kg500 kg after a parameter change
Tool capacityTool storage capacity
14 / 21 / 28
Control
ControlCNC unit
CNC-D00
Dimensions and weight
Machine weightWeight
3,350 kg
Floor spaceRequired floor space (with control unit door open)
2,410 x 2,233 [3,071] mm
Further figures the manufacturer publishes
Distance between table top and spindle nose end
150 - 530 mm
Cutting feed rate
1 - 30,000 mm/min
Tool shank type
MAS-BT30
Tool change time (Tool To Tool)
0.6 / 0.7 s14 or 21 tools / 28 tools
Height
2,633 mm
- manufacturer specification page, fetched October 28, 2026.
What fits a Brother SPEEDIO W1000XD2
Each of these follows from a published specification above, which is named beside it.
30-taper toolholders
This is a 30-taper spindle — the 7:24 steep taper that CAT-30, BT-30 and DIN 69871 (SK-30) holders all share. They share the taper and nothing else that matters: the retention knob and the flange form differ between those standards, so holders do not swap between them without changing pull studs. Knowing which standard a machine was tooled for is worth doing before the holders are packed.
Derived from Spindle taper: 7/24 tapered No.30
What to check on a Brother SPEEDIO W1000XD2
- Control generation. The manufacturer specifies CNC-D00 for this model. Units we have tracked run 2022 to 2024; an early one may carry an older control or a retrofit.
- Spindle. The manufacturer gives a spindle speed of 12,000 min-1 (standard; 20,000 and 10,000 high-torque optional (16,000 min-1 version discontinued June 2026)). Run the spindle to top speed and listen for bearing noise.
- Spindle load. The manufacturer gives 10.1/7.0 kW (12,000 min-1 spindle, 10 min / continuous) of spindle power. Take a heavy cut and watch the load meter.
- Spindle taper. The manufacturer gives a spindle taper of 7/24 tapered No.30. Check it for fretting and that the drawbar holds a tool.
- Axes and way covers. The manufacturer gives X 1,000 mm, Y 500 mm and Z 380 mm of travel. Run each axis end to end and check the way covers.
- Rapids and ballscrews. The manufacturer gives a rapid traverse of 50 x 50 x 56 m/min. Measure the backlash on each axis.
- Tool changer. The manufacturer gives the tool capacity as 14 / 21 / 28. Cycle every pocket and watch for a hesitation.
- Table. The manufacturer gives a table size of 1,100 x 500 mm and a table load of 300 [500] kg (500 kg after a parameter change). Check the table and its T-slots for damage.
- Rigging and floor. The manufacturer gives a machine weight of 3,350 kg and a floor space of 2,410 x 2,233 [3,071] mm. Confirm the rigging route and the floor will take that.
Brother SPEEDIO W1000XD2 control
- Control CNC-D00
Brother SPEEDIO W1000XD2 listing history
Where it was listed
machinetools.com
2 listings, 2023–2024
exapro.com
1 listing, 2022
Filed under CNC Vertical Machining Centers (VMC) (3).
Model years seen
2024, 2023, 2022.
What Brother SPEEDIO W1000XD2 listings agree on
X-axis travel
39.4 in
Y-axis travel
500 mm
Z-axis travel
15 in
What affects the value of a used Brother SPEEDIO W1000XD2
- Control. The manufacturer specifies CNC-D00.
- Build year. The units we tracked were built from 2022 to 2024, across 3 model years.
- Against the published figures. The manufacturer gives max spindle speed 12,000 min-1 (standard; 20,000 and 10,000 high-torque optional (16,000 min-1 version discontinued June 2026)), spindle motor power 10.1/7.0 kW (12,000 min-1 spindle, 10 min / continuous), tool capacity 14 / 21 / 28 and X-axis travel 1,000 mm.
Looking for a Brother SPEEDIO W1000XD2 for sale?
We have tracked 3 Brother SPEEDIO W1000XD2 listings on 2 marketplaces (machinetools.com and exapro.com), model years 2022 to 2024. We buy Brother SPEEDIO W1000XD2 machines and do not sell them.
Every Brother SPEEDIO W1000XD2 we have tracked
2023 Brother SPEEDIO W1000XD2
2022 Brother SPEEDIO W1000XD2 (listed as W1000Xd2)
The Brother SPEEDIO W1000XD2 among machining centers and mills
Browse all CNC Vertical Machining Centers (VMC), or see every Brother machine we track.
Other CNC Vertical Machining Centers (VMC) models in this directory
Brother SPEEDIO-S700X1
- Units tracked
- 14
- Years seen
- 2014–2020
Brother SPEEDIO R650X1
- Units tracked
- 8
- Years seen
- 2015–2021
Brother SPEEDIO S500X1
- Units tracked
- 8
- Years seen
- 2014–2020
Have a Brother SPEEDIO W1000XD2 to sell?
We are the buyer, not a broker. No listing, no consignment, no waiting for someone else to find a buyer. Quote in 24 to 48 hours, and we can arrange rigging, freight and the pickup.
